- Joined
- Mar 2, 2013
- Messages
- 529 (0.13/day)
- Location
- st. louis missouri
Processor | Ryzen 5 5600 |
---|---|
Motherboard | Asus b450F ROG Strix |
Cooling | 3 case fans plus deepcool maxx V2 cpu heatsink |
Memory | 16 GB Crucial Ballistix DDR4 |
Video Card(s) | Zotac RTX 3060 TI |
Storage | 3 SSD's, 1 Samsung 970 Evo NVME and 2 sata (Crucial 1 TB and ADATA 480 GB) and 2 sata hardrives |
Display(s) | 27 inch Asus 75hz gaming monitor |
Case | NZXT h500i black |
Power Supply | Corsair cx650m 650 watt psu |
Mouse | Corsair M65 Pro RGB |
Keyboard | Inland RGB mechanical keyboard with blue optical switches. |
Software | windows 10 64 bit |
Hey guys, so I have noticed my PC power cycles once at start up after a cold boot then goes into Windows normally.
Basically I hit the power button PC turns on for a few seconds fans spin, shuts off then on then boots into Windows and I can use my computer normally without issue.
It's been doing this for a while now and I've just kind of had ignored it but I was thinking it could be something I may need to look into.
My specs are an i7 2600k, Asus p8p67 deluxe mother board, gtx 1070, 16 gbs of RAM and an 800 watt psu.
My CPU is over locked to 4.3 ghz as well.
Thanks.
Basically I hit the power button PC turns on for a few seconds fans spin, shuts off then on then boots into Windows and I can use my computer normally without issue.
It's been doing this for a while now and I've just kind of had ignored it but I was thinking it could be something I may need to look into.
My specs are an i7 2600k, Asus p8p67 deluxe mother board, gtx 1070, 16 gbs of RAM and an 800 watt psu.
My CPU is over locked to 4.3 ghz as well.
Thanks.