1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

PCI Express External Cabling Specification Completed

Discussion in 'News' started by malware, Feb 8, 2007.

  1. malware New Member

    Joined:
    Nov 7, 2004
    Messages:
    5,476 (1.24/day)
    Thanks Received:
    956
    Location:
    Bulgaria
    PCI-SIG, the Special Interest Group responsible for PCI Express industry-standard I/O technology, today announced the availability of the PCI Express External Cabling 1.0 specification, which extends the PCI Express (PCIe) interconnect architecture “outside the box.” Cables using the PCIe technology will be used for external applications, as well as applications internal to an enclosure that need a cable connection. The PCIe External Cabling specification provides guidelines for a practical cable length, but does not currently set a maximum cable distance.

    The new specification creates new opportunities for the application of the PCIe architecture to innovative platform topologies, allowing developers to leverage the existing and broad PCIe ecosystem.

    The PCI Express External Cabling specification establishes a standard method of using PCIe technology over a cable by defining cable connectors, copper cabling attributes and electrical characteristics, connector retention, identification and labeling. It conforms to the PCIe 1.1 Base and electro-mechanical specifications, enabling high data rates between PCIe subsystems. Standard cables and connectors have been defined for x1, x4, x8, and x16 link widths. Sideband signaling is provided via the cable to attain compatibility with existing silicon and software; this leverages existing software and infrastructure, provides ease-of-use and helps accelerate adoption of the technology.


    “This specification helps the industry create new products that will take PCIe technology out of the box – enabling PCIe solutions for IO expansion drawers, external graphics processors, tethered mobile docking, communications equipment and embedded applications,” said Al Yanes, PCI-SIG chairman and president. “With the large market PCI Express has achieved since its introduction in 2002, this is a great opportunity for OEMs to take products to new levels with PCIe technology.”

    The new cabling specification currently supports signaling rates of 2.5GT/s. In the future, PCI-SIG expects to continue to advance the cabling technology by providing new enhancements and foresees support for 5.0GT/s signaling rates.

    The PCIe Cabling specification is available for download at http://www.pcisig.com/specifications/pciexpress/pcie_cabling1.0/.

    Source: PCI-SIG
     
    10 Year Member at TPU
  2. EviLZeD

    EviLZeD New Member

    Joined:
    Sep 14, 2006
    Messages:
    816 (0.22/day)
    Thanks Received:
    47
    this would be great for laptops
     
    10 Year Member at TPU
  3. unsmart

    unsmart New Member

    Joined:
    Mar 13, 2006
    Messages:
    480 (0.12/day)
    Thanks Received:
    34
    This would be good for a graphics card box, if the lags not to bad. It looks like where all going to have a few cards in our systems now and it would be nice to put a couple in a external enclosure you could shut off when not using it, plus reduce heat and power use in the case. I wonder if AMD is going to put out something like this for there hyper link port thing?
     
    10 Year Member at TPU
  4. Steevo

    Steevo

    Joined:
    Nov 4, 2005
    Messages:
    9,425 (2.32/day)
    Thanks Received:
    1,924
    There isn't anything on the market that actually uses the full bandwidth. The closest perhaps being a shared set of lanes with Crossfire or SLI.





    But imagine a network of PC's built with the full bandwidth of PCI Express. Or connecting to remote massive parallel box. The ability to compute with a sun box or IBM box on the fly.
     
    10 Year Member at TPU 10 Million points folded for TPU
  5. Wile E

    Wile E Power User

    Joined:
    Oct 1, 2006
    Messages:
    24,323 (6.53/day)
    Thanks Received:
    3,778
    My first thought was that these double slot gfx coolers would no longer render your expansion slots useless. This could present limitless possibilities, if executed properly. If the latencies aren't too terrible, you could also just remove the gfx cards from the case, eliminating a huge source of heat. Higher clocks, here we come. lol I also like Steevo's idea of using it for parallel computing. Throwing together a couple of budget dual core machines would give you the number crunching ability of some much more expensive rigs.
     
    10 Year Member at TPU
  6. WarEagleAU

    WarEagleAU Bird of Prey

    Joined:
    Jul 9, 2006
    Messages:
    10,814 (2.84/day)
    Thanks Received:
    547
    Location:
    Gurley, AL
    Looks like the external dongle for Xfire wanst such a bad idea huh fellas?
     
    10 Year Member at TPU
  7. XooM New Member

    Joined:
    Oct 17, 2004
    Messages:
    479 (0.11/day)
    Thanks Received:
    7
    Location:
    Close to FrozenCPU.com
    eh... actually, the reason for the whole SLI bridge/Crossfire dongles (or internal bridge) was because there wasn't enough bandwidth guaranteed available over the PEG slot for the two cards to exchange data over. the SLI connector is, IIRC, pretty much just a dedicated PCI-E x1 lane.
     
    10 Year Member at TPU
  8. tkpenalty New Member

    Joined:
    Sep 26, 2006
    Messages:
    6,958 (1.87/day)
    Thanks Received:
    345
    Location:
    Australia, Sydney
    About time.. I should have patented this T_T.
     
    10 Year Member at TPU
  9. Steevo

    Steevo

    Joined:
    Nov 4, 2005
    Messages:
    9,425 (2.32/day)
    Thanks Received:
    1,924
    Most SLI and or crossfire are two 8X slots. And that still provides more than enough bandwidth.


    http://www.pcper.com/article.php?aid=212


    They do it as it is easier for them to interface two of their own cards than to force other manufacturers to comply.
     
    10 Year Member at TPU 10 Million points folded for TPU
  10. XooM New Member

    Joined:
    Oct 17, 2004
    Messages:
    479 (0.11/day)
    Thanks Received:
    7
    Location:
    Close to FrozenCPU.com
    then why are lower-end cards SLIed or Crossfired over the PCI-E lanes?

    Also, the PCI-E x16 is very saturatable, its just that games and 3dmark don't do it. MentalRay or similar, on the other hand, do.
     
    10 Year Member at TPU

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)