PNY GeForce RTX 5070 Ti Epic-X RGB Plus OC

[W1zzard]

Cut and paste review quote should be +6000MT/s or +3000MHz (DDR equivalent)

Is it 3000 or 6000 ? Math please

 

[:D:D]

I'm confused, I thought it was a typo. Math is done already in GPUZ, aren't you the author?


Default Mem Ck

Mem clock 1750MHz, 28000MT/s
Bus Width 192 bit

Bandwidth 28000 x 192 / 8 = 672000 MB/s or 672GB/s



Overclocked Mem Ck

Mem clock 2125MHz, 34000MT/s
Bus Width 192 bit

Bandwidth 34000 x 192 / 8 = 816000 MB/s or 816GB/s

34000MT/s - 28000MT/s = 6000MT/s

The MT/s tends to get abused though, even with nvidia it seems

 

[W1zzard]

I'm confused, I thought it was a typo. Math is done already in GPUZ, aren't you the author?

I am, thanks for the math, this is looking good. Batch-editing all affected reviews

 

[matteo25]

Is this card good at cooling the VRMs?

 

[Knight47]

Does this use the same thermal paste as the 4000 series where it was pumping out after a short while?

 

[Sol_Badguy]

Probably my favorite from the 5070 Tis reviewed here.
Very reasonable thickness and weight and good cooler performance.
On p.39 it's among the quietest in default configuration. Very good profile from PNY.

The TUF is slightly thicker and heavier but similar in many ways (ASUS felt the need to block some of the airflow on the back with an "X" while PNY used a "V"). Not so similar in price, though.
It does however have a higher quality, less crowded PCB and a stronger VRM.
Similar results to the Epic-X using Quiet BIOS, Palit should take notes because they've messed up, it's details like this that add or subtract value.

Too bad it reached my market later than others, otherwise this would've been my pick.

 

[Devox]

Hello someone managed to flash bios on this card ? I really am tempted between these 2 vbios:

Asus RTX 5070 Ti VBIOS

16 GB GDDR7, 2295 MHz GPU, 1750 MHz Memory

www.techpowerup.com

and
https://www.techpowerup.com/vgabios/275793/275793

one is 300W target / 400W limit
the other is 320W target / 350W limit

I feel it might be interesting to have a higher power limit / power target since i see mine power throttle quite a bit

 

[rusty caterpillar]

What's with the ">" blocking more than 50% of the flow through on the back of the card?

Same stupid "Design" as Power Color Red Devil.
Adding heavy heatsink + many heat pipes and than diminish the efficiency of those by covering the best as you can, hot air exhaust and airflow for the third fan