• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Problem with nvflash(nvdia flashing tool)

MrHijacked

New Member
Joined
Sep 27, 2017
Messages
3 (0.00/day)
because im having some display issue when i recently installed a clean os im trying to flash an updated BIOS of my gpu but im having this problem with nvflash where when i try to type in the command box every letter i type it just scrolls down and it doesnt let me type anything, for example i press n it moves me to a section, i press v it moves me down again
 
Doing a BIOS flash on the GPU shouldn't be necessary if things were working before your clean OS install. To me, flashing the BIOS on a GPU is meant for two things:

1) Being an extremest - someone that wants to fine tune and get the most out of their GPUs
2) Very last ditch effort to fix a GPU if all else fails.

A clean OS install should not require you to flash the BIOS on your GPU.
 
You need to type the nvflash command parameters after the nvflash name.

It has no gui, so you need to feed it command line arguments
 
You need to type the nvflash command parameters after the nvflash name.

It has no gui, so you need to feed it command line arguments
thanks for your reply but as i said it doesnt let me type anything so idk how im supposed to do that
 
start an elevated command prompt, navigate to the folder with nvflash using cd and other commands, then type nvflash and the parameters.
 
start an elevated command prompt, navigate to the folder with nvflash using cd and other commands, then type nvflash and the parameters.
thats what i did but when i get to nvflash it still doesnt let me type anything
 
Back
Top