Project Cosmos 1000

[n0tiert]

man, that sucks... i would not even try to fit the fattie... the only way that thing will fit is if you re-route your entire tubing system... is there anywhere else in the case you can put it? Maybe instead of an exhaust rad, the triple can be the exhaust and that rad can be the chiller... i.e. the rad that cools the air after the pumo and before the cpu? im thinking hard drive intake.

The tubing isn´t the prob, seem´s to fit if i leave it at the rear exhaust !
i didn´t wanted to attach attach the fan or rad at the outside, but the side frame covers should overlap the fan from it´s depth.....

the cosmos (S) has a bottom fan intake, but i if place the rad there it would messup the cablemanagement and place for the pump, reservoir.....

 

[kyle2020]

Maybe send it back and get a stealth rad?

*edit*

Black Ice do a cracking range of stealth radiators, I had a stealth 24cm Xflow one, the temperatures were excellent in my old cosmos.

 

[phanbuey]

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=200&products_id=21112 < that would work with a quiet Yate loon 120x20MM fan.

 

[n0tiert]

Maybe send it back and get a stealth rad?

the xtreme has 47mm in depth, a slim has 30mm with and with fan 55 mm is also alot of space to mount it with attache´d fan there... i´ll place the fan on the outside... if it doesn´t look or work good i go for a slim and might place it on bottom....

scythe also have a slim Scythe Kaze Jyu Slim, 100 x 100 x 12mm
with a slim rad it would be 42 mm with fan

hhhhmmmm i give the phat chic a try first.....

 

[phanbuey]

the xtreme has 47mm in depth, a slim has 30mm with and with fan 55 mm is also alot of space to mount it with attache´d fan there... i´ll place the fan on the outside... if it doesn´t look or work good i go for a slim and might place it on bottom....

scythe also have a slim Scythe Kaze Jyu Slim, 100 x 100 x 12mm
with a slim rad it would be 42 mm with fan

hhhhmmmm i give the phat chic a try first.....

but if you get the slim and the 120x20mm fan then all you would need is 3mm more for 50MM, and you definitely have 3MM in that pic. The other thing it would do, if you use push, is move the nozzles back 15mm, which would give a slightly cleaner look - I agree with you about not mounting it outside though, good call.

Make that phat chick work!

 

[n0tiert]

let`s bring it on .....

 

[kyle2020]

You could always turn it upside down so that the barbs are at the top, mount it on the outside of the rear 12cm fan mount, drill 2 holes for the tubes to pass through and have a regular fan mounted on the inside?

If you understand that, ill be impressed haha.

*loads up ms paint*

 

[n0tiert]

You could always turn it upside down so that the barbs are at the top, mount it on the outside of the rear 12cm fan mount, drill 2 holes for the tubes to pass through and have a regular fan mounted on the inside?

If you understand that, ill be impressed haha.

*loads up ms paint*

holes are drilled already from stock upper the 120mm mount, i place the fan on the outside, no way to place it upsidedown without using 90° barbs, btw how much do the decrease flowrate anyway ?

 

[kyle2020]

Heres my artistic impression

90 degree bends will impede flow but I cant imagine that it would be significant.

 

[n0tiert]

Heres my artistic impression

http://i43.tinypic.com/2946u87.png

90 degree bends will impede flow but I cant imagine that it would be significant.

haha sweet

 

[kyle2020]

Would that layout work?

 

[n0tiert]

Would that layout work?

i´ll do it reverse , rad in fan out , fan in pull mode

 

[kyle2020]

ah, good plan.

 

[Scrizz]

Heres my artistic impression

http://i43.tinypic.com/2946u87.png

90 degree bends will impede flow but I cant imagine that it would be significant.

wow you're good, u drew perfectly straight lines

 

[n0tiert]

.: The Phat Chic Lost :.​

just have to cut the coil for those small tubes an tighten that chic up

 

[WarEagleAU]

Actually it looks good. Id have mounted it on the outside of the back if it were me. Then again, the inside is indeed nice.

 

[n0tiert]

Actually it looks good. Id have mounted it on the outside of the back if it were me. Then again, the inside is indeed nice.

I thought about that too but, didn´t want to have the tubes out the case and the rad hanging on the back... fan isn´t that huge an dnd on the back

 

[phanbuey]

I thought about that too but, didn´t want to have the tubes out the case and the rad hanging on the back... fan isn´t that huge an dnd on the back

You animal... that looks great!... the back fan wont be noticeable from the rest of the case IMO, expecially with a black wire grill of some sort.

great job that looks fantastic!

 

[Scrizz]

very nice

 

[n0tiert]

The Aerogate 3 arrived today, and i really hope it can handle the 15W from the 3 Rad Scythe´s on 1 wire.... and there will be enough juice for the other 3 connector on the pcb usually there should be 18w per channel ... we´ll see

All newer Temp/Fan Controllers have such a weak output, dunno understand that :shadedshu

 

[WarEagleAU]

Im thinking it should.

 

[n0tiert]

Im thinking it should.

Works like a charm so far !

 

[Alv]

how do you connect the 3 Rad Scythe´s on 1 wire??

 

[n0tiert]

how do you connect the 3 Rad Scythe´s on 1 wire??

i cut each fan the 3pin molex of sleeved them to one and soldered them to one new 3pin Molex
so the 3 Rad fans are connected to 1 > connector on the fan controller and all 3 of em are regulated true one channel on the controller

Not "1" wire ...

the rpm wire is outsourced and will be connected to the mb so if the fans fall out systems shutdown

 

[phanbuey]

i cut each fan the 3pin molex of sleeved them to one and soldered them to one new 3pin Molex
so the 3 Rad fans are connected to 1 > connector on the fan controller and all 3 of em are regulated true one channel on the controller

Not "1" wire ...

the rpm wire is outsourced and will be connected to the mb so if the fans fall out systems shutdown

What happens if only one fan shuts down?