DTV DRAGON
New Member
- Joined
- Jun 3, 2008
- Messages
- 877 (0.15/day)
- Location
- canada
System Name | family system |
---|---|
Processor | intel quad core Q9650 o/c'ed to 4.1 |
Motherboard | gigabyte EP45T-USB3P ( new board) |
Cooling | custom cpu and gpu cooling |
Memory | 8 gig G.Skills RipJaws @ 7,8,7,24,@1440mhz |
Video Card(s) | HD5870 SAPPHIRE 1018@1310at1.29v on water |
Storage | 750 gig sata 7500rpm X2 seagate barracuda |
Display(s) | acer 22.5 lcd |
Case | Antec 600 |
Audio Device(s) | 7.1 internal, soon to be auzentech x-fi forte |
Power Supply | thermaltake 850 watt modular (new version, single rail) |
Software | Windows 7, 64 ult. |
Benchmark Scores | vantage E47428 3DMARK06 23290 needs updateing |
ok guys i finaly started today on setting up my water cooling system in my antec 600. For the first part of this build I will not be doing any painting on the case itself. This will only be the modding and fab part, and after I have that completed and ran for awhile, I will then yank it apart to paint the inside of the case etc.This will be done at a snails pace because of my pain condition, so if it looks like Iam not makeing much progress please keep that in mind.So today it was bascial just cutting away on the harddrve cage as well the cable managment panel so i can fit me rad upfront,I was thinking about mounting it uptop, but with it upfront i can still use the two 120mm fans that are stock on my 600 to pull in cool air,and then i mounted another set of 120mm on the rad so I have a push/pull air effect happining.with the front panel back on you cannot even tell that there is a rad tucked in behind there,So at this point I have the rad mounted and secured in place. and then found a nice spot for the reservoir (bought from sniperbob), but needed a way to fill it once it was mounted,so only thing i could come up with was plumbing some of my 1/2 red hose (that I bought from jellyrole) from the top of the res going through the top of my case (still need to make some sort of kewl looking cap for it) and that was about it for today as i needed to put it back together as its our only puter in the house lol, Part 2 will be mounting Swiftech MCP655 pump/EK-FC5870 for hd5870/laying out hose routeing