Duncan
New Member
- Joined
- Dec 24, 2005
- Messages
- 23 (0.00/day)
Processor | AMD 64 3200+ Venice Stock Cooling |
---|---|
Motherboard | Asus A8N-E |
Cooling | 4 80mm Fans on case, stock GPU and CPU coolers |
Memory | Crucial 2GB kit (1GBx2)PC3200 (pretty cheap stuff) |
Video Card(s) | Connect 3D X800GTO |
Storage | WD Caviar SE Sata2 120GB |
Display(s) | CTX 17" CRT Monitor |
Case | Cheiftec Dragon DX-01GN-U |
Audio Device(s) | Sound Blaster Audigy |
Power Supply | Hiper 580W Modular |
Software | Windows XP Home |
Well, ive got a connect3d X800GTO, unfortuneatly not moddable to 16 pipelines, but should still pump out a decent overclock. (400core, 490mem)
Im going to be using the stock hs/f.
I need to know what temperature should GPU's go up to before there to hot.
Also i have a few issues with ATI Tool (0.24). When i ran it to find max core, it ran fine for 5.38, then it got an error, the core was at 448. When it automaticly begins again, it ran fine at this speed for 10minutes before getting an error, but in those 10minutes, ATITool didnt increase the core speed again. I have to abort and restart it at 448core for it to continue raising. It then ran for 3.24 and got an error at 470core.
How long should a certain speed run fine on ATITool for it to be considered stable?
What core/mem should i expect to get from this card?
EDIT:
Just had a muck around with my fan settings in ATI Tool, god does this thing get loud at 100%! But it does make a difference to the temperatures, and brings them down faster. Should i put the speeds higher when running ati tool?
Im going to be using the stock hs/f.
I need to know what temperature should GPU's go up to before there to hot.
Also i have a few issues with ATI Tool (0.24). When i ran it to find max core, it ran fine for 5.38, then it got an error, the core was at 448. When it automaticly begins again, it ran fine at this speed for 10minutes before getting an error, but in those 10minutes, ATITool didnt increase the core speed again. I have to abort and restart it at 448core for it to continue raising. It then ran for 3.24 and got an error at 470core.
How long should a certain speed run fine on ATITool for it to be considered stable?
What core/mem should i expect to get from this card?
EDIT:
Just had a muck around with my fan settings in ATI Tool, god does this thing get loud at 100%! But it does make a difference to the temperatures, and brings them down faster. Should i put the speeds higher when running ati tool?
Last edited: