Razer Blade 2023 - i9 13950hx + RTX 4090 - Temperatur Problems

[Namelocked]

Hello TechPowerUp Community,

i am new here and ask you for your Support in my case.
I need some help with my Razer Blade 16 from 2023
I got the Modell with an Intel 13950HX and RTX 4090
I guess the only Problem was the Intel CPU, i look in XTU and see if i do some Repack, and few Downloads it reached 100 degrees Celsius easy.
I do an -0.125v on all cores and do some -0.075 on ecores and cache

Do you have some other information for get the degrees down?
Can i deactivate maybe the onboard Graphics, and if yes safe it some degrees for me?
And my curser starts to hang a little bit and it feels laggy.
I know like install Repacks or something like that cost much Power.
But this was an 2k+ Bucks Laptop and i guess there are some few things i can do to let these Razer runs better ?
I also do an repaste of the thermal paste, few weeks ago. But doesnt use them for Gaming since them, i guess it doesnt do anything for the temps

Please Help me

 

[Namelocked]

bump

 

[ZenZimZaliben]

Sounds like vapor chamber heatsink failure. 80-85C should be the normal High temp. Seems to be a more common issue on the Blade 16.

 

[Namelocked]

How can i identify an vapor chamber failure? Maybe there are some "better" mod vapor chambers or just the original ones from razer?

 

[ShrimpBrime]

Must go to Razor's site and update the bios and firmware before anything.

 

[ir_cow]

Yes I agree. Update everything first. Next contact Razer support. If they deem it broken, RMA.

However 100c on the CPU is kinda normal. You also have a 4090 mobile (120watts), so that is consuming a lot of power as well.

 

[Namelocked]

Must go to Razor's site and update the bios and firmware before anything.

Did it already

Yes I agree. Update everything first. Next contact Razer support. If they deem it broken, RMA.

However 100c on the CPU is kinda normal. You also have a 4090 mobile (120watts), so that is consuming a lot of power as well.

I need to do something to lower like at least 5-10 degree to not reach the thermal throttle ?!

 

[ir_cow]

It's designed to either reach 100c or the turbo. Intel 13950HX Max turbo is 157w at 5.5Ghz. That is also a good amount to be contained by a laptop cooler.

What prompted you to look into the temps?

 

[ShrimpBrime]

When I need to run cool with my 14700/14900K model desktop processors, I manually set a 40x multi for both P and E cores. Leaving v-core on auto. Management Engine will utilize a lower VID vs having the same VID but trying to manually lower v-core. Which obviously doesn't always work, because VID....

For the video card, just lower the power slider on MSI afterburner. Should run a little cooler without sacrificing too much clock speed (where you need it for gaming).