Share your AIDA 64 cache and memory benchmark here

[harm9963]

This is fun!

 

[cool007zqw]

This is fun!

View attachment 177115

Impressive! Could you give the model of your motherboard and memory?

 

[harm9963]

Impressive! Could you give the model of your motherboard and memory?

Got it !

3800 cl14 WOW , GOD BLESS ASUS!
CPU stock , save that for later , need a new Dram calculator , its amazing what my x470 can do !

 

[snp688]

Hi,
Micron J-DIE. Loose timings but at least it's stable. Had enough clearing cmos for now.

 

[harm9963]

More tweaking .

Hi,
Micron J-DIE. Loose timings but at least it's stable. Had enough clearing cmos for now.
View attachment 177340

Also 3600 CL14 Fast preset or safe , cheers

 

[biniteck]

Hello everybody! I decided to overclock my old computer and ran into the following problem: read cache L2 and Read cache L3 constantly differ several times! for example now L2 cache read = 315GB / s, immediately in the next test- 140GB / s. Read cache L3 140Gb / s, in the next test 45000Mb / s. and so constantly! does this indicate a problem? thanks

 

[Edwired]

Hello everybody! I decided to overclock my old computer and ran into the following problem: read cache L2 and Read cache L3 constantly differ several times! for example now L2 cache read = 315GB / s, immediately in the next test- 140GB / s. Read cache L3 140Gb / s, in the next test 45000Mb / s. and so constantly! does this indicate a problem? thanks

Update the aida64 to the latest version

 

[forfun]

 

[dandaman622]

Ryzen 2600x stock cooling right now, Ballistix 3200 OC'd to 3400 C16.. Haven't spent too much time on it, pretty new to adjusting ram settings. I've always left it as it was, until this computer. I had Corsair Vengeance LPX and couldn't get it to run XMP, so I had to learn. That was a pain, I finally got it to run at 3200, but it wasn't worth it because the only way it would be stable is if I cranked up voltage to 1.5.. If I didn't my computer would restart when I played CS GO for 5 minutes.

 

[claustrold]

Ryzen 3900XT
g skill 3600 cl 16

 

[tabascosauz]

Trying to find the limits of the Infinity Fabric, currently at 4333 CL16, results always 1:1

Ryzen 4650G @ stock but with 1.2V VSOC
Viper Steel 4133CL19 @ 4333 16-16-16 1.68V

 

[bxcounter]

Trying to find the limits of the Infinity Fabric, currently at 4333 CL16, results always 1:1

Ryzen 4650G @ stock but with 1.2V VSOC
Viper Steel 4133CL19 @ 4333 16-16-16 1.68V

View attachment 178628

Hi, got a question.
Were you using integrated or dedicated gpu during this aida benchmark run ?
I'm asking because i read somewhere that Renoir gets much lower memory latency when using dedicated gpu.

ps...great bandwith for such a low frequency !

 

[tabascosauz]

Hi, got a question.
Were you using integrated or dedicated gpu during this aida benchmark run ?
I'm asking because i read somewhere that Renoir gets much lower memory latency when using dedicated gpu.

ps...great bandwith for such a low frequency !

I always use the iGPU on my Renoir. I have a HD5450 and GT610 but I just can't be arsed to put them in lol

I am probably losing a bit of IF ceiling by using the iGPU. Currently, IF maxes out at 2200MHz (4400). MCLK goes higher (obviously, Renoir UMC is ridiculous) but FCLK won't.

Interesting that you say that, I've only ever read about TSME affecting Renoir latency not iGPU usage. It's about an auto 6ns gain, so I always have it disabled.

 

[natr0n]

 

[freeagent]

Mine @ mostly stock.. no CPU OC, mems @ 1:1

 

[Ph03n1X]

Without overclock or fine-tuning - impressive for old x470

 

[Somdakus]

Hey guys. Does memory speed and latency looks fine for my system? Everything is in stock. PBO is disabled. Memory in DOCP profile 3200Mhz

I'm really worried that my results are bad compared to what other are getting. Especially L3 cache

 

[Ph03n1X]

Hey guys. Does memory speed and latency looks fine for my system? Everything is in stock. PBO is disabled. Memory in DOCP profile 3200Mhz

View attachment 179176

I'm really worried that my results are bad compared to what other are getting. Especially L3 cache

You have low frequency, so latency could be ok, did you checked you have 1:1:1 fclk : uclk :ram ?
You have to tell more about your RAM.

 

[Somdakus]

You have low frequency, so latency could be ok, did you checked you have 1:1:1 fclk : uclk :ram ?
You have to tell more about your RAM.

I have Gskill F4-3200C14D-32GTZSW in DOCP. Everything is on AUTO but I remember CPU-z reported infinity fabric at 1600.

Here is what Ryzen Master says

Spoiler: Large Picture

 

[Ph03n1X]

I have Gskill F4-3200C14D-32GTZSW in DOCP. Everything is on AUTO but I remember CPU-z reported infinity fabric at 1600.

View attachment 179177

Here is what Ryzen Master says

Spoiler: Large Picture

View attachment 179179

dual rank should be love kiss for double-chip zen 3... strange
I see memory clock and inf.fabric - that is ok. But not memory controler clock (UCLK). Try HWiNFO64.

 

[Somdakus]

dual rank should be love kiss for double-chip zen 3... strange
I see memory clock and inf.fabric - that is ok. But not memory controler clock (UCLK). Try HWiNFO64.
View attachment 179181

Here:

I'm really worried that something could be horrible wrong with my setup

 

[Ph03n1X]

Here:

I'm really worried that something could be horrible wrong with my setup

I agree - I would be worried as well. L3 cache should be much faster. And I am not sure it is RAM related...
Easiest is try to borrow different RAM...
But you should try your CPU at you friends MotherBoard. L3 speeds should be limited by CPU itself and internal frequencies between chiplets.
(I have ultra cheap Team T-FORCE DARK Z alpha 32GB (2x16GB) DDR4 4000... And you see how do they perform)

 

[Somdakus]

I agree - I would be worried as well. L3 cache should be much faster. And I am not sure it is RAM related...
Easiest is try to borrow different RAM...
But you should try your CPU at you friends MotherBoard. L3 speeds should be limited by CPU itself and internal frequencies between chiplets.
(I have ultra cheap Team T-FORCE DARK Z alpha 32GB (2x16GB) DDR4 4000... And you see how do they perform)

Unfortunately I dont know anyone with AMD. Most of my IRL friends are using laptops or older intel CPUs.

 

[Ph03n1X]

Unfortunately I dont know anyone with AMD. Most of my IRL friends are using laptops or older intel CPUs.

..ouch.
From what I see. Try different RAM And I hope you are lucky and it will solve it. (sometimes it matters which pair of slots you use!)
But if not, I have no good news for you, when I look at schematics.

BTW: Is you socket clean and CPU pins ok?

 

[Somdakus]

Yes they were. I mean if they weren't it shouldn't just affect L3 cache? I should be running into BSODS or other stability issues and my other scores would be bad too? I get the same performance as other in CPU-Z, TimeSpy, Cinebench R20. It just AIDA Cache test giving me this... My ram is in 2 and 4 slots (from CPU) like it supposed to be

Here is my timings: