Share your AIDA 64 cache and memory benchmark here

[msimax]

This thread is for Aida

If you are gonna run Pi, at least do the 32m

 

[freeagent]

Not bad.

freeagent`s SuperPi - 32M score: 5min 38sec 244ms with a Ryzen 9 5900X

The Ryzen 9 5900X @ 5150.3MHzscores getScoreFormatted in the SuperPi - 32M benchmark. freeagentranks #894 worldwide and #17 in the hardware class. Find out more at HWBOT.

hwbot.org

 

[The King]

3800 CL13-14-14-28 1T (no boost override)

 

[Hello_im_snowman]

hiya, my 7700x was unstable when i enabled EXPO and left everything else at stock. I didn't change anything other than voltage. I just raised the voltage to 1.38 from the 1.35 that comes stock, and then everything became stable.

i would say, reset your bios to optimized defaults, reboot, enable expo, and then manually change voltage to just a tiny tiny bit above EXPO normal voltage. it worked for me anyway.

your default voltage is 1.40v on that kit. so maybe try 1.420v

Trying this now! All I have to do is change VDD from AUTO to 1.42V, correct? I can then run AIDA64 for stress testing, that's considered appropriate for memory, I suppose?

 

[Space Lynx]

Trying this now! All I have to do is change VDD from AUTO to 1.42V, correct? I can then run AIDA64 for stress testing, that's considered appropriate for memory, I suppose?

you will have to ask someone else that, I don't know all the abbreviations

 

[igralec84]

Can someone with AM5 check the AIDA64 memory read after putting the PC to sleep and waking it, if it's normal for it to drop by around 10%?
For me it also seems that on a cold boot for my 5600 CL40 @ 6000 CL30-36-36-76-112 1.4v setup, memtest gets 3500% easily, but after waking up, i get an error at around 1600%, which might cause my 1-2 weekly hard reboots (and not the PBO+CO being over-optimistic, although it's still possible but the crashes i get are always when i finish playing or while starting a game and for some reason when the steam client is running...).

 

[Pfeffernuss]

MSI Carbon Wifi Z690, Kingston Beast 5600 DDR (2x 16GB).

 

[freeagent]

Just messin around..

 

[Det0x]

Will need some time to fully stabilize this, but finally broke 100k mb/s writespeed
FCLK @ 2200mhz
MCLK @ 6600MT/s

 

[Canned Noodles]

stock timings, they're already pretty low

 

[freeagent]

Nice man, I don't have it anymore but this was my X5690.

Looks a bit massive... sorry

Edit:

Those reads and writes are low, I will see if I have a newer one.

 

[Redwoodz]

Trying this now! All I have to do is change VDD from AUTO to 1.42V, correct? I can then run AIDA64 for stress testing, that's considered appropriate for memory, I suppose?

Yes,if it is set on AUTO manually set it to 1.4v+. AIDA is good for quick testing.

 

[Canned Noodles]

 

[freeagent]

My 5900X at full stock, no PBO..

Semi-Passive cooled

 

[Deleted member 185158]

My 5900X at full stock, no PBO..

View attachment 275688


Semi-Passive cooled

How does it look with clear cmos?
And how does it look at just the base clocks?

What's the cpu capable of 1v vcore challenge?

 

[freeagent]

How does it look with clear cmos?

The lowest FLCK/MCLK with 21-21-21 timings?

And how does it look at just the base clocks?

Like 3700 flat or? My memory is 3200C14 so to me 1600 1:1 would be "stock" so the only real tune on it is by running 1800 1:1.

What's the cpu capable of 1v vcore challenge?

I am not sure, this is my first time being gentle with it, up until I got X3D I just beat it..

Right now I am upping my power limits to see what it can do. But I am cheating by having the stock fractal fans all the way up..

In the end I might just run with teh center fan for a bit

Edit:

My goal is to be able to run WCG at 4500Mhz, but it looks like it wants to do it at only 4400Mhz. With fans it runs at 4600Mhz.

 

[Deleted member 185158]

The lowest FLCK/MCLK with 21-21-21 timings?

Like 3700 flat or? My memory is 3200C14 so to me 1600 1:1 would be "stock" so the only real tune on it is by running 1800 1:1.

I am not sure, this is my first time being gentle with it, up until I got X3D I just beat it..

Right now I am upping my power limits to see what it can do. But I am cheating by having the stock fractal fans all the way up..

In the end I might just run with teh center fan for a bit

Edit:

My goal is to be able to run WCG at 4500Mhz, but it looks like it wants to do it at only 4400Mhz. With fans it runs at 4600Mhz.

No, I mean clear cmos and run it. Would be 2133mhz cl15's yeah?

Base clocks, PBO turbos and all that disabled. Yes 3.7ghz all core.

1v, what can it clock at just this vcore.

Only for my curiosity, do not go out of your way, just wondering.

 

[freeagent]

No, I mean clear cmos and run it. Would be 2133mhz cl15's yeah?

Base clocks, PBO turbos and all that disabled. Yes 3.7ghz all core.

1v, what can it clock at just this vcore.

Only for my curiosity, do not go out of your way, just wondering.

I will try it out

 

[Deleted member 185158]

I will try it out

Nah, you don't have to, was just curious if you knew off your head is all. I guess I should have said that first lol.

 

[TinTin Win]

 

[DemoN91]

Hi guys. This is my stock stats. How the hell u get that low latency in ms? When i get better clock on ram latency gettin bigger too by 10 ns or so

 

[ColinB123]

3800 CL13-14-14-28 1T (no boost override)

View attachment 274961View attachment 274962

Thank you so much: your VDDP/VDDG voltages sorted out my WHEAs !!
That's really nice on a B450!

 

[thuGG_pl]

I don't understand those results...
All latencies are bad. y-cruncher and Prime95 don't report any problems.

 

[agent_x007]

Slow memory = Stable memory
Latencies are bad, because timings are bad.

 

[3x0]

Comparison between 5600X and 5800X3D with same RAM config.
5800X3D OC


5600X OC