• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Share your CPUZ Benchmarks!

Is ADL the best single thread performance at the moment?

Yes. Zen 3 does seem to keep pace somewhat in game benchmarks though.
 
Just put together an LGA775 system on Windows 10 21H2 and have 20 CPUs to choose from.

Here's a very fast 'Cedar Mill' Pentium 4 HT 631 scoring amazingly well.

And again, but this time with Hyper-Threading disabled:
Cedar mill clocks really high, at least 5GHz is easy on pretty much all of them. Try it and see, 333MHz FSB @ 1.45-1.5V should do it.
 
Cedar mill clocks really high, at least 5GHz is easy on pretty much all of them. Try it and see, 333MHz FSB @ 1.45-1.5V should do it.

I'm all out of thermal paste at the moment, so I can't do any more tinkering with the system. :laugh:

Ordered some and waiting for delivery though. I'm definitely going to try this when I can.
 
hi

Capture.PNG
 
Yes. Zen 3 does seem to keep pace somewhat in game benchmarks though.

ADL does not match ZEN 5950X in multi, not even the 12900K, I'm still ok with the 12700k. The 5950x is the top Ryzen and is very expensive, but if people really need it or the Epeen it affords, fine.
 
ADL does not match ZEN 5950X in multi, not even the 12900K, I'm still ok with the 12700k. The 5950x is the top Ryzen and is very expensive, but if people really need it or the Epeen it affords, fine.

Not in everything, but in most things it does.
 
MSi released AGESA 1.2.0.7 for the B450 recently. PBO +200Mhz
AGESA 1207 CPUZ crop.jpg

5600X CPUZ PB0 +200Mhz crop.jpg
 
Last edited:
1653418305163.png
image_2022-05-24_215240639.png

78W power limit, +150MHz boost, -20-25 curve opt.
 
Last edited:
Hi guys, does anyone have a Lynnfield i7 they can test with Hyper-Threading on and off?
 
Last edited:

Attachments

  • CPU-Z2.jpg
    CPU-Z2.jpg
    282 KB · Views: 192
Last edited:
5600 non X PBO +200Mhz. (Weird problem took single core boost to 4850Mhz but CPU-Z ST tanked! not sure if its a bug)

5600 PBO +200 -30 CO All Core crop.jpg

 
Last edited:
It is not a bug, it cant hold that frequency with those settings.
 
It is not a bug, it cant hold that frequency with those settings.
WIll need to investigate further has even the smallest OC in hydra is causing negative ST in CPUZ even 4700 with no CO applied.
That is not normal behavior. This CPU is going to get close to 700 ST or somewhere near there!

@dont whant to set it"'
Was a software related issue, used Ryzen master to OC 4825 ST so no CO applied yet.
5600 4825 CPUZ 670 ST crop.jpg
 
Last edited:

Attachments

  • Screenshot 2022-06-01 220802.png
    Screenshot 2022-06-01 220802.png
    446.3 KB · Views: 131
that's such a nice setup. Undervolt + 5ghz all core...

To be fair, before the undervolt the motherboard was feeding it around 1.33v, so the "undervolt" likely puts it where it should be :)
 
To be fair, before the undervolt the motherboard was feeding it around 1.33v, so the "undervolt" likely puts it where it should be :)
mine did that too... ended up being stable at 5.2 on way less voltage than auto -- scores are a bit low since i have every single app open rn and it hasn't been rebooted in 3 days, but here's the little 6 + 4 in the itx build:

1654140378017.png
 
mine did that too... ended up being stable at 5.2 on way less voltage than auto -- scores are a bit low since i have every single app open rn and it hasn't been rebooted in 3 days, but here's the little 6 + 4 in the itx build:

View attachment 249609

Man the 12600k has to be up there with the best price/perf value ever..
 
Back
Top