• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Share your CPUZ Benchmarks!

Challenge accepted.

1664113962412.png

Intel Core i5 12600K @ 5521.5 MHz - CPU-Z VALIDATOR (x86.fr)

1664114377931.png



12600k is a nutty chip. If I had better cooling this would run at 5.6 Problem is there are no auto voltage profiles at 55/56x and none of the stock ones work with high bclk so it's hard to put a backoff in to get 5.6 on 2 cores and 5.4 on all core. volts stick at max ratio volts all the time.
 
Last edited:
phanbuey said:
Challenge accepted.

View attachment 262954
Intel Core i5 12600K @ 5521.5 MHz - CPU-Z VALIDATOR (x86.fr)

View attachment 262955


12600k is a nutty chip. If I had better cooling this would run at 5.6 Problem is there are no auto voltage profiles at 55/56x and none of the stock ones work with high bclk so it's hard to put a backoff in to get 5.6 on 2 cores and 5.4 on all core. volts stick at max ratio volts all the time.
Click to expand...
Can the 12900k participate? Got you both at 927
 
gimme a minute, i've got your single beat in cr23/cpu-z, but I cannot get the multi stable for either, my thermal grizz contact frame doesnt come till tomorow, and im not guna lie, last week, I was def seeing some light under my straight edge when i checked the cpu. IDK if that effects the cpu OC but it def feels like it, the mem is def low...you might have me whipped till this frame comes. Ill give it a few more tries... i got 22.3k on multi cr23 prior to the bend, I could barely crack 21k this morning...so shes not firing on all cylinders, you guys got the contact frame?
 
I hit the lottery said:
gimme a minute, i've got your single beat in cr23/cpu-z, but I cannot get the multi stable for either, my thermal grizz contact frame doesnt come till tomorow, and im not guna lie, last week, I was def seeing some light under my straight edge when i checked the cpu. IDK if that effects the cpu OC but it def feels like it, the mem is def low...you might have me whipped till this frame comes. Ill give it a few more tries... i got 22.3k on multi cr23 prior to the bend, I could barely crack 21k this morning...so shes not firing on all cylinders, you guys got the contact frame?
Click to expand...

Yeah I'm running a cheapo one I found on eBay. It didn't make a ton of difference in my case - but my chip was pretty straight. I think delidding would be a worthwhile experiment but I'm a bit scared lol, those resistors on top of the chip look fragile.
 
yeah I sprung for the thermal.. Idk why, I know the much cheaper thermalrite is just fine, but w.e....Delidding looks amazing, but you seen these first few people who are making the tools to do this crap? The heat and force needed is insane i'm confident in my hands but, it looks nuts... Tell ya what..with raptor coming...and the 13600k beating the 5950x stock.....If you decide to do it, Ill go to the looney bin with ya! Yours and mine are two of the best 'home' non liquid nitrogen overclocks i've seen, bar none....... You down? I heard good things about this gear, https://pcper.com/2022/04/delid-your-alder-lake-rockit-cool-12th-gen-intel/ from consumer and reviewer ... oh and here, WHELP....I did 904 single whilst getting 8720 multi....and 898 single whilst getting 8842 multi.....But could not get both, and not one clean pass of cine, she def bowed a bit. hahahah....... No excuses though, Keep it shiny for me sir, Ill be back for it

1664123428516.png
 
I hit the lottery said:
yeah I sprung for the thermal.. Idk why, I know the much cheaper thermalrite is just fine, but w.e....Delidding looks amazing, but you seen these first few people who are making the tools to do this crap? The heat and force needed is insane i'm confident in my hands but, it looks nuts... Tell ya what..with raptor coming...and the 13600k beating the 5950x stock.....If you decide to do it, Ill go to the looney bin with ya! Yours and mine are two of the best 'home' non liquid nitrogen overclocks i've seen, bar none....... You down? I heard good things about this gear, https://pcper.com/2022/04/delid-your-alder-lake-rockit-cool-12th-gen-intel/ from consumer and reviewer ... oh and here, WHELP....I did 904 single whilst getting 8720 multi....and 898 single whilst getting 8842 multi.....But could not get both, and not one clean pass of cine, she def bowed a bit. hahahah....... No excuses though, Keep it shiny for me sir, Ill be back for it

View attachment 262968
Click to expand...
Once raptor lake is out I am in for sure. :toast:
 
Ryzen 9 5900X:

AVX2 vs default:

1664185577524.png
vs
1664185632895.png



And Ryzen 5 2500U:

AVX2 vs default:

1664185822738.png
vs
1664185889735.png


Usually the Ryzen 5 2500U scores around 380/395 - 1800/1900 on the default bench.
But I have open browsers, so it takes some CPU time.
 
Last edited:
fevgatos said:
What lol, the difference is 4% :roll:
Click to expand...
the price difference of same-brand and same-"possibilities" motherboard is 65%... yeah, 12400F is no-brainer solution..;)
 
Bez názvu.png
Bez názvus.png


MSI GT75 7RE
notebook 7820hk - 4.5ghz ,,.but still limited by notebook / FW :banghead:
+
AVX2 "custom FIX" ,.,.not works well on defaults config.
 
phanbuey said:
Challenge accepted.

View attachment 262954
Intel Core i5 12600K @ 5521.5 MHz - CPU-Z VALIDATOR (x86.fr)

View attachment 262955


12600k is a nutty chip. If I had better cooling this would run at 5.6 Problem is there are no auto voltage profiles at 55/56x and none of the stock ones work with high bclk so it's hard to put a backoff in to get 5.6 on 2 cores and 5.4 on all core. volts stick at max ratio volts all the time.
Click to expand...

12600-cpu-z.png


Indeed... no point in upgrading to Raptor Lake or even zen 4 for you.
I was able to get 873 points (single) with my 12600 (non-K) air cooled (original box from Intel).
Thing is: I'm getting high scores only in the first two or three runs, then scores drops to near 800 points.
Do you have any ideia why is this happening? It seems some kind of throttling, but thermals and power are OK, not exceeding.
Do your scores also drops after a few consecutive runs? TIA.
 

Attachments

  • 12600-cpu-z.png
    12600-cpu-z.png
    198.7 KB · Views: 266
Kill most of the system tray programs on the taskbar, and did you wait several minutes after booting into Windows before running? Maybe Windows is checking for and/or applying updates in the background?
 
The King said:
View attachment 263644
valid.x86.fr

AMD Ryzen 7 5800X @ 4448.96 MHz - CPU-Z VALIDATOR

[i9b1qj] Validated Dump by DESKTOP-SRC5DS8 (2022-09-29 20:00:05) - MB: MSI B450M MORTAR MAX (MS-7B89) - RAM: 32768 MB
valid.x86.fr valid.x86.fr
Click to expand...
Slight improvement using CO. Should break 690 maybe 700 ST after some further tunning.
CPUZ 6811 MT 679 ST crop.jpg

valid.x86.fr

AMD Ryzen 7 5800X @ 4448.96 MHz - CPU-Z VALIDATOR

[mc1unu] Validated Dump by DESKTOP-SRC5DS8 (2022-09-30 04:02:38) - MB: MSI B450M MORTAR MAX (MS-7B89) - RAM: 32768 MB
valid.x86.fr valid.x86.fr
 
Last edited:

Attachments

  • safe mode 4.85.png
    safe mode 4.85.png
    13.5 KB · Views: 311
A little tinkering with PPT TDC EDC and hey presto a wee bit more for a little bit less

CPUz and CB23 2022-10-01 164302.jpg
 
I don't think this is too bad for a CPU that can't take an OC
CPUZ58c.png
CPUzm.png
CPUZ58.png
 
Here is one that is OC'ed.

LE: SMT off, scores from a cold boot.
Screenshot 2022-10-01 123655.png
 
@INSTG8R , Well , I have set SMT off in BIOS/UEFI , so 8C/8T.
 
dont whant to set it' said:
@INSTG8R , Well , I have set SMT off in BIOS/UEFI , so 8C/8T.
Click to expand...
Fair enough why your ST score is better, plus you got a good little OC. Any reason you disabled SMT? My board compensates for the lack of OC with a setting called Kombo Strike which basically allows it to hold full boost better under MT loads.
 
INSTG8R said:
Fair enough why your ST score is better, plus you got a good little OC. Any reason you disabled SMT? My board compensates for the lack of OC with a setting called Kombo Strike which basically allows it to hold full boost better under MT loads.
Click to expand...
I've heard quite good things about that Kombo Strike Jayztwocents seems to think it's great on 7000 series cpu's where he got it to undervolt and maintain a 5.1GHz allcore in CB23 all at a 10 degrees less than stock
 
You must log in or register to reply here.
Back
Top