• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Socket 775 Build

some upgrades
1.4GB no name RAM
2.Old CM Elite 310 case
3.Deepcool Gammaxx
4.Deepcool Case Fans.
5.Adata SSD
6.Sapphire R7 240
7.ASUS Xonar DG..Since onboard Realtek alc 662 has conked out..
 

Current but tomorrow upgrades



19 inch monitor HP LINK

PhotoGrid_1527039562860.jpg

24 inch monitor HP LINK
 
Last edited by a moderator:
some upgrades
1.4GB no name RAM
2.Old CM Elite 310 case
3.Deepcool Gammaxx
4.Deepcool Case Fans.
5.Adata SSD
6.Sapphire R7 240
7.ASUS Xonar DG..Since onboard Realtek alc 662 has conked out..
At first I thought the fans said Deadpool :laugh: but nice setup. Did you find out the ram maker? I hate when onboard stuff craps out

Just for kicks my HP 8460P upgrades 8GB Hynix (2x4GB) LINK i7-2670QM LINK
 
Last edited by a moderator:
Sorry for the delay...Did some dissassembly and found out that the RAMS are Hynix 2GB modules...i ripped out the sticker and pasted them onto the heat sinks
P_20171130_212950_vHDR_Auto.jpg
P_20171130_213149_vHDR_Auto.jpg
P_20171130_213848_vHDR_Auto.jpg
P_20171130_213859_vHDR_Auto.jpg
.
 
Low quality post by Jose Jeswin
and i have upgraded the HDD to a barracuda 2TB... converted my old 2.5 inch momentus hdd into a see through portable HDD..:D...
P_20170721_194344_vHDR_Auto.jpg
P_20170724_195044_vHDR_Auto.jpg
 
Finished...also added a deepcool fan controller....Deepcool Rockman..
P_20170114_171918_vHDR_Auto.jpg
P_20170209_194237_vHDR_Auto.jpg
P_20170209_194245_vHDR_Auto.jpg
P_20170209_194254_vHDR_Auto.jpg
 
I hope that you complete your build successfully...
Happy Computing...:peace::)
 
Well hopefully the new MB help [Asus P5Q-EM] my current ASUS P5G41-M LE the OC is only these Profile crap 5-15% which doesn't help and no Manual Settings

I'm not getting it now just the HS and ram. I think the HS may help? Degrees only @43C so ha I doubt it. Just this board is a Lose...:banghead: though it was cheap. I always look for cheap on eBay
 
BTW..I never overclock the 775 system..definitely not worth doing...i satisfy my need for speed on my AMD FX 8350 system...the details are in my system specs...Please overclock only if you absolutely need to do so...:)
 
New HS





And I Prime95'd the cpu to 2.8 from 2.4 for 25min. going to try 3GHZ​
 
What were your temperatures?...and which temp monitor did you use?..
 
I use HWinfo64 and it say 30-37C

3GHZ didn't happen. 2.8 is fine
 
Don't push it..:eek:...i would recommend Core temp for stress testing...And i use open hardware monitor for routine monitoring... OHM is cool...it has a widget that shows current temps...:)
Clipboard01.jpg
 
for more severe testing, i use a digital themometer stuck on my AMD FX 8350 heat sink which i remove after i am done...
s-l1600.jpg
 
Going to do Prime95 now for 30Mins

@48C the HS does well. Now @50
 
Tj. Max. adjusted ?
 
Yeow.....:cry::cry:....that poor cpu...anyways...you are very brave for doing something like that..:clap:..keep an eye on those temps...
 
are you running an air conditioner?
 
90C is too hot brother..
 
what thermal compound do you use?..
 
No no 90 is the max temp just @50 and no... Sliver 5 is what I use

Seems the HS doesn't let it go passed 50C :rockout:
 
hope you are using a good thermal paste...well, signing off for now..will check on your overclocking adventures tomorrow....:peace:
 
arctic silver 5 is very good...:rockout:
 
Back
Top