Uptime73
New Member
- Joined
- Feb 5, 2005
- Messages
- 109 (0.02/day)
- Location
- Columbus, Ohio USA
System Name | custom built clone |
---|---|
Processor | AMD Phenom 9950 Quad Core (Agena) |
Motherboard | ASUS M3A78-EM |
Cooling | Zalman CNPS9700 LED |
Memory | OCZ Fatal1ty PC2 8500 4 GB (2 x 2GB) |
Video Card(s) | Visiotek ATI Radeon 3650 |
Storage | Western Digital 320 GB SATA II hard drive |
Display(s) | Proview CRT |
Audio Device(s) | onboard |
Power Supply | 475 watt not sure of brand |
Software | Vista Ultimate Edition x64, Service Pack 2 |
Hello all. I have an Iwill P4HT motherboard with Intel 2.4 GHz processor. I have set the memory to configured for 266, used CAS settings of 2.5/3/3/6. locked the AGP/PCI at 33/66, and increased the FSB to from 133 to 150. Everything seems to be stable.
However, when I go past 150, the system hangs when it tries to detect drives during boot up, and after hanng for a while, it will eventually say "boot failure.... please insert system dis"
Is this as far as I can go overclocking, or this due to a heating issue? What can I do?
Thanks for any help.
- Josh
However, when I go past 150, the system hangs when it tries to detect drives during boot up, and after hanng for a while, it will eventually say "boot failure.... please insert system dis"
Is this as far as I can go overclocking, or this due to a heating issue? What can I do?
Thanks for any help.
- Josh