Clint
New Member
- Joined
- Apr 29, 2006
- Messages
- 9 (0.00/day)
- Location
- Baton Rouge
Processor | P4 2.4ghz Northwood @3.3ghz |
---|---|
Motherboard | Asus P4C800-E Deluxe |
Cooling | 23 fans, CPU:Thermal Integration Dr. Thermal TI-T707TN, fan replaced with Delta 60mm 50cfm 8300rpm |
Memory | Corsair TWINX2048-4400 Pro (2gb PC4400 DC kit) |
Video Card(s) | ATI AIW 9800 Pro |
Storage | WD740 Raptor & others |
Display(s) | Dell 20" LCD (2001FP) |
Case | Huge server case (Chieftech Matrix) |
Audio Device(s) | Integrated |
Power Supply | Sintek 500SLI |
Software | XP Pro |
Hi all. I just installed ATItool v.24 and it didn't work on my XP SP2 PC w/ATI AIW 9800 Pro. A window kept popping up every time I try and start it saying: “The Kernel mode driver does not seem to be running. A device driver is required for communication with your video hardware.” After closing the window, it would run, but all controls were grayed out. Yes, the drivers are installed. I even went to XP Services and enabled the “ATI Smart” entry, but it won’t start. It says the service “started then stopped” and that it may be normal if the service is not “presently needed”.
I found out, through no help of the site, that the program MUST be installed when you're logged in as an Admin! It would help if someone mentioned this!
Now the problem is where I had the "Temperature" area in the drop-down before, it's gone! And that's the main thing for which I needed the program! So what happened to it? Why was it there on the first install, but not now?
Thanks.
I found out, through no help of the site, that the program MUST be installed when you're logged in as an Admin! It would help if someone mentioned this!
Now the problem is where I had the "Temperature" area in the drop-down before, it's gone! And that's the main thing for which I needed the program! So what happened to it? Why was it there on the first install, but not now?
Thanks.