• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Thermalright Intros the Silver Arrow ITX-R CPU Cooler

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,670 (7.43/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Thermalright unveiled the Silver Arrow ITX-R CPU cooler. A variant of the original Silver Arrow, this cooler is optimized for mini-ITX builds, with a design focus on clearance near the bottom fins of the fin-stack, making them fit for mini-ITX motherboards, including clearance around the memory, VRM, and PCI-Express slot areas. The cooler features a conventional type-D dual aluminium fin-stack design. The included 130 mm fan, nested between the two fin-stacks, spins between 300 to 1,300 RPM, pushing up to 94.8 m³/h of air. Measuring 103 mm x 153 mm x 150 m, it weighs about 600 g, and supports most modern CPU socket types, including LGA2011v3, LGA115x, AM3+, and FM2+. The company didn't reveal pricing.



View at TechPowerUp Main Site
 
No mention of AM4 socket compatibility.... Come on Thermalright.
 
I always thought dual tower coolers look much better with a single, middle, fan.
Performance wise there's not a significant difference.
 
Usually it looks like heatsink is attached to the motherboard ... this looks other way round, as if motherboard is attached to the heatsink
 
This is news ?
The cooler has been on the market for 2 years now.

You are thinking of the original Silver Arrow ITX cooler. This is the new and improved R variant that is more compact to fit a greater number of itx motherboards and cases (/off Thermalright marketing).
 
Seems like they dropped a couple stack of fins to get the height down from 165mm to 150mm. Pretty bold move to sacrifice performance for height. You also loose the top heatpipe caps. Width and Depth seem to be unchanged, it just comes down to wither or not your ITX case can take a 150mm height cooler. Board compatibility could also be a bitch being so wide. But also, there are a lot of 150mm towers like the CRYORIG H7 and M9, and TRs own True Spirit 120. So there are a lot of competitors for the money.
 
Back
Top