TPU's F@H Team

[NastyHabits]

Is anyone getting anything other than 548's since they got the WS back up? I've ONLY had 548's.

Unlucky you. Last night I had nothing but 353's and got a nice 3000 point spike in the middle of the night. Though it hardly made up for the 5000 point drop in my daily average.

 

[[Ion]]

I've gotten 353's and 1888's

Only 511s
And 384s

 

[johnspack]

Told you I'd be back! A fellow TPUer has sold me a gtx260 for dirt cheap... I SHALL fold again!
3 Mil here I come!

 

[mstenholm]

Got my X58 board, RAM, CPU and PSU back from RMA. They claim that it boots fine, well not when I try. I have cleared the BIOS, tried with another GPU, tried with and without HD and DVD, tried different power outlet from the PSU, tried with one stick. I e-mailed the shop and asked if they tested all the parts, together. Waiting for answer.

 

[AndyBroke]

I am having problems sending competed work with the gpu client for my gts250. I also have a 5870 running on the same pc with no problems delivering. The nvidia client haven't been able to send since the 15th. I only get status 503.
Do you think its a problem on my end?

 

[mstenholm]

ATI and nvidia runs on different servers. There have been (and might still be) problems with some of the nvidia clients. Try to restart it. See the official tread here:

http://foldingforum.org/viewtopic.php?f=18&t=13434&p=131583#p131583

 

[Steevo]

F@H on 5XXX cards?

 

[AndyBroke]

F@H on 5XXX cards?

It works, but with the current client it isn't working at anything near its full potential.

Edit:
I have tried to restart the nvidia client several times with no luck.

 

[thebluebumblebee]

It works, but with the current client it isn't working at anything near its full potential.

Edit:
I have tried to restart the nvidia client several times with no luck.

Are you using the - local switch for BOTH clients? Mixing clients on a system (ATI/Nvidia) can cause problems without the - local switch.

 

[NastyHabits]

Ooooo, goodie gum drops. Got one of those 450's. 7355 PPD on a 8800 GS! Yeah Buddy! Gimme some more of those!

 

[thebluebumblebee]

Ooooo, goodie gum drops. Got one of those 450's. 7355 PPD on a 8800 GS! Yeah Buddy! Gimme some more of those!

So, how any times did you check to see if you were seeing that correctly? Fun to see 96 shaders pumping out 7000 points.

 

[bogmali]

I see that BUCK got his 1st -bigadv WU in

 

[BUCK NASTY]

Yep, it's actually my second(been several weeks since the first one). I finally have this rig stable and the 1.1 image seems to me working with me so far. Thanks to Bogmali, El Fiendo, and msgclb for their patience in helping me get this rig stable.

P.S. Does anyone know the Log folder location for HFM to monitor the -bigadv WU? I had it once before, but scrapped the configuration when I had to switch to SMP2 for a few weeks. I have scoured the web to no avail.

 

[El Fiendo]

Yep, it's actually my second(been several weeks since the first one). I finally have this rig stable and the 1.1 image seems to me working with me so far. Thanks to Bogmali, El Fiendo, and msgclb for their patience in helping me get this rig stable.

P.S. Does anyone know the Log folder location for HFM to monitor the -bigadv WU? I had it once before, but scrapped the configuration when I had to switch to SMP2 for a few weeks. I have scoured the web to no avail.

For the LinuxFah image? Should read \\IP Address\FAH\ (FAH is default, but this is whatever you set the Hostname to)

 

[mstenholm]

Got my X58 board, RAM, CPU and PSU back from RMA. They claim that it boots fine, well not when I try. I have cleared the BIOS, tried with another GPU, tried with and without HD and DVD, tried different power outlet from the PSU, tried with one stick. I e-mailed the shop and asked if they tested all the parts, together. Waiting for answer.

All were tested according to shop (no names yet). OK I toke the PSU and tried it in my wifes PC. Now it cant boot any longer One GTS250 down and a :shadedshu wife. The shop agreed to have a second look. Parts are now on its way back to Germany, again

 

[bogmali]

All were tested according to shop (no names yet). OK I toke the PSU and tried it in my wifes PC. Now it cant boot any longer One GTS250 down and a :shadedshu wife. The shop agreed to have a second look. Parts are now on its way back to Germany, again

Oh damn, that totally sucks. Why shipping them back Deustchland may I ask? Is that where you bought them?

 

[mstenholm]

I bought it in Germany. I couldn't find a shop in Denmark that had all the things that I wanted. And yes that sucks - could do +40 kPPD and will now be doing 9k for a week or longer.

 

[msgclb]

Yep, it's actually my second(been several weeks since the first one). I finally have this rig stable and the 1.1 image seems to me working with me so far. Thanks to Bogmali, El Fiendo, and msgclb for their patience in helping me get this rig stable.

P.S. Does anyone know the Log folder location for HFM to monitor the -bigadv WU? I had it once before, but scrapped the configuration when I had to switch to SMP2 for a few weeks. I have scoured the web to no avail.

I had a devil of time figuring out how to monitor my HFM -bigadv WUs. When you start LinuxFAH just before you get the prompt it will show you how to monitor HFM and fahmon. For me it's \\ip address\fah. I believe this ip address is your network IP such as 192.168.0.xxx where the xxx is what changes for each installation of HFM.

The IP address for each brand of router is different. For example Linksys routers use 192.168.1.1 and D-Link and Netgear routers typically use 192.168.0.1.

My guess is you know your network IP address so all you have to do is find the xxx. My guess is it's 110+ but I don't know for sure.

You can use ipconfig to find your network configuration but unfortunately the HFM IP address is not shown.

** I just remembered that HFM used \\FAH\fah to monitor my first -bigadv WU.

 

[NastyHabits]

So, how any times did you check to see if you were seeing that correctly? Fun to see 96 shaders pumping out 7000 points.

I checked several times. It ranged from 7000 to 7300+ PPD. I don't really know if that's accurate because FAHmon is just a bit optimistic. Plus it doesn't take into account the delays we're all experiencing in uploading results these days.

 

[FreedomEclipse]

I checked several times. It ranged from 7000 to 7300+ PPD. I don't really know if that's accurate because FAHmon is just a bit optimistic. Plus it doesn't take into account the delays we're all experiencing in uploading results these days.

I seem to be having more trouble picking up work.....its been sitting there for hours telling me no appropriate workserver is available & this seems to be happening a lot more often. - I coulda been atleast 5% into the next project

 

[msgclb]

I noticed something tonight that I couldn't believe.

That has to be an illusion that Buck is on of my Top 10 Team Opportunities although it would take over 10 years. I'd bet he won't be there for long! Over on my Top 10 Project Opportunities is a more appetizing target. In a couple of days I'll pass 4DoorGTZ[HCF] and hopefully El Fiendo and oily_17 will both pass him soon.

 

[BUCK NASTY]

I noticed something tonight that I couldn't believe.

http://img.techpowerup.org/100220/FH-My Opportunities - 2-20-10.jpg

That has to be an illusion that Buck is on of my Top 10 Team Opportunities although it would take over 10 years. I'd bet he won't be there for long! Over on my Top 10 Project Opportunities is a more appetizing target. In a couple of days I'll pass 4DoorGTZ[HCF] and hopefully El Fiendo and oily_17 will both pass him soon.

Bring it on, brother!!!!

I gotta say congrat's to everyone that has stepped up there production in the last couple months, especially you msgclb. You guy's are doing some awesome work.

Anybody notice that our folding batches are MIA

It does appear that our updates are kinda thin. I have been plagued by crappy GPU work units for the past 24 hours, but should still be pushing 100K+. I also have a bigadv finishing in the next 2 hours to help boost our numbers a bit for today.

 

[bogmali]

It does appear that our updates are kinda thin. I have been plagued by crappy GPU work units for the past 24 hours, but should still be pushing 100K+. I also have a bigadv finishing in the next 2 hours to help boost our numbers a bit for today.

What I meant was "badges" and not "batches"

They're back now I wonder if this is because of the updates

 

[theonedub]

The badges disappear every Sunday for a short time, I do believe its because of updates- if that's what you were wondering.

 

[t77snapshot]

Hi, I am interested in being apart of the F@H team! Well I have been interested for awhile, but have been putting it off for too long and I am now ready yo help out. I have one question though: Can I fold a 9600GT on an AMD chipset board? (Different system then my spec) If not, I'm gonna need some advice on a good budget ati card for folding? I have been a Nvidia user all my life so when it comes to ATI I have little knowledge.