Unlocking my GTO

[Mulder]

I have read the main thread about unlocking GTO cards but I couldnt find a mention of my particular card in there.

I have a PCI-E HIS X800GTO ICEQII Turbo card. It has an R480 core (according to ATI Tool) and a power connector.



It looks like I can flash this to 16 pipes but I don't know which bios to use. (I'm not sure if it has 2.0ns or 1.6ns chips)

Can someone help me out please?

 

[mmx]

You are lucky, it lookls like you can flush it to 16P,The memory type looks like this: K4J553230F-GC20 (16) if the last mumber on the memory is 20 than you hawe 2.0ns or if you hawe 16 than is 1.6ns. Good Luck!!!!

 

[Mulder]

I dont suppose there's any way to tell which type of memory I have without removing the heatspreader? How do the bioses for 2.0 and 1.6 memory differ anyway? Memory timings?

 

[mmx]

dump the bios whit atitool, and send me tha bios and ill tell you.

 

[Mulder]

Here it is: http://rapidshare.de/files/14676404/HISGTObios.bin.html

 

[mmx]

Flush this bios(http://rapidshare.de/files/14677570/hisgto16p.rom.html) (is your old bios but whit 16p) whit the command: atiflash -p 0 -newbios hisgto16p.rom -f
Good Luck

 

[Mulder]

Why is the file a .rom not a .bin? Does it make any difference?

 

[mmx]

No no just flush it!! Atitool dump the bios whit **.bin while rabit wich i used to change your bios saves **.rom.

 

[Mulder]

Well it flashed successfully, thanks for your help!

Here's my 3dMark05 scores:

400/490/12pp: 4544
500/500/12pp: 5225
400/490/16pp: 5104
500/500/16pp: 5820
500/590/16pp: 6185

I think the memory may be able to go a little higher but any higher on the core results in a crash and hard reeboot.

It hits 64 degrees max when scanning for artifacts with ATI Tool.

 

[sadisticflirt]

I would like to do this with my x800. It's the same card and I'm sure the same bios. I matched up mulders screenshot of ati tool with mine and everything lined up. I am not sure how to dump the bios though. The button in ati tool is grayed out...

 

[Azn Tr14dZ]

Mulder, is your memory 2.0ns or 1.6ns?

 

[sadisticflirt]

Bump

 

[Mulder]

I'm sorry i don't know why your dump bios button would be greyed out, maybe you could pm mmx about this? I dunno about the memory either, I don't really want to take off the heatspreader to look at it.

 

[dolf]

If you have problems with ATITool get the BIOS in DOS mode using atiflash.

 

[sadisticflirt]

thanks for the advice dolf...any tips on doing that? I'm just doing a good old uninstall of my graphics drivers followed by driver cleaner pro and now just want to unlock those 16 pipes....after I get the bios backed up, how would I flash it seeing that I do not own a floppy drive? I have the Ultimate Boot Disc "collection" on a cd but I don't think that would help me save a back up bios because I am sure the disc would not be able to be written too.

 

[dolf]

Look if necessary uninstall and install the video card in the slot again. Install ATITool again or try with ATI Tray Tools. It has the same option.

 

[sadisticflirt]

I was able to dump the bios with ati tray tools and now that program tells me I have 540+ fps in the 3d render whereas atitool gives me 12-13fps in it's rendering window...