• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[User-Review]World´s First: the new XSPC Radiator EX 360 in Cartago´s Review

Joined
Jun 6, 2011
Messages
18 (0.01/day)
Likes
11
#1
World's First: the new XSPC Radiator EX 360 in Cartago's Review




Hello and welcome





Today in the review I want to introduce the brand-new radiator XSPC EX360.
The company has long been successfully XSPC Water Cooling on the sector.
The previous radiators were designed mostly on slowly rotating fan and had corresponding, relatively large dimensions.
The RX Series is one of the most successful series radiators worldwide, in performance and build quality at a very high level stands.
However, the radiators are not just with its 60 mm thick and need to save space, if they should be installed internally, most very large case.
And not everyone is a tower-like monsters are in room, remains the choice of so-called Slim radiators quite small, there has XSPC radiators positioned the new EX series.
Since the thin radiators are known to be the best, they need fans with a little more speed. But they fit into almost any clean housing.




Now we come to the EX 360 radiator, here are the specifications:


Length: 395 mm
Width: 120 mm
Thickness: 33 mm
Material: brass chambers, fins made of copper
Connections: 2x1 / 4 "
Fan mounting screws with UNC 6-32

Delivery:
EX 360 Radiator
Of 12 black screws in the length of 30 mm and 6 mm.




Impressions:






















The packaging of the radiator is designed very simple and elegant, centered on the lid is the XSPC logo and see right below the name of the radiator.
As you can see from the pictures, the radiator is processed very clean, including the quality of the coating has increased significantly.
The coating is applied cleanly and has a velvety surface, the "Tangible" Quality is beyond doubt.
The side of the radiator is very well laid out XSPC embossed logo, all threaded holes are clean.
The fin spacing is much narrower than at the RX series, eventually the radiator can cool even the most demanding systems, and whether he succeeds in showing the following tests.



test system and test procedure.





Mainboard: Gigabyte P67 Professional
CPU: Intel Core i7 4.5 Ghz @ 2600K at 1.35 V
RAM: 16 GB (4x4GB) Corsair Vengeance
Graphic: POV GTX580 TGT
PSU: be quiet! P9 850W
HDD: Samsung HD502HJ F3
Housing: Xigmatek Elysium Super Tower


water cooling:




CPU: EK Water Blocks Supreme HF Full nickel
Graphic: EK Water Blocks EK-FC 580
Pump: Phobya DP-12 400
Conditions: Alphacool HF 38 Cape Cyclone 150 V.2
DFM: AC High Flow
Temperature sensors: 2x Phobya IG / AG
Monitoring: Aqua Computer XT 5 Aquaero
Quick couplings: 4x Koolance VLN3
Hose: 16/10 Masterkleer
As the liquid was distilled water with Phobya ZuperZero Clear Concentrate



circuit design:




terms> Pump> Graphics Cards> CPU> 2xKupplungen the radiator> DFM> Terms

Sensors on one input / output of the radiator mounted.



I tested with the well-known programs Prime95 (In-place large FFTs) and simultaneously FurMark 1.8.5 (Xtreme burn-in mode), then ran the whole 60 minutes per pass, while the radiator is external in the booth next to the housing Phobya mounted.
To understand better the values ​​obtained, this test is the MagiCool Slim 360 Radiator, as a reference in the low-RPM radiators, and the Koolance Radiator, 3x120mm serve 30-FPI Copper as a representative of the high-RPM radiators.
As fans were used Phobya nano-G 12 RED LED PWM Silent 1500rpm as they with their area of ​​between 600-1500rpm, are ideal for this test.


So here the results:















Conclusion:




As can be seen from the tables, positioned the new EX 360 XSPC radiator at the top of the "Slim" radiators in my test.
This is also clear that the XSPC radiator has not been designed in such a high rpm fan speeds rather special for the area by 1000 u /.
But minutes into the deepest regions of the 600 u /. makes the radiator still a good figure, of course, there are better radiators in this area but that is bought with a significantly greater thickness.
For those for which is such a thin radiator are used, this is my new radiator 360 EX personal reference dar. He is a very good compromise between cooling performance and size.
The workmanship is very good and surpasses that of the RX series in every way, here XSPC has increased significantly. Also, the presentation and delivery vote, missing only the good end only fan decouplers.
Provides the needed performance and very good processing quality, allowing the new XSPC Radiator EX 360 Cartago's Review Award in Gold.










Credits:
I hereby wish to thank the company XSPC for the provision of and test pattern and I have placed trust and the company Aquatuning for their support and provision of the fan and radiator comparison.
 
Joined
Aug 2, 2009
Messages
4,014 (1.30/day)
Likes
1,832
System Name Abacus
Processor i5 2500K
Motherboard ASRock p67 Extreme4 Gen3
Cooling Swiftech MCP35X, EK HF Copper, 2.120 rad, 3.120 rad
Memory 2x4GB G.Skill Sniper 1600
Video Card(s) 2 Zotac GTX 770 4GB w/ FC EK Blocks
Storage WD 640BG x2/WD 250GB/Samsung 2TB
Display(s) QNIX 27" PLS
Case Corsair 700D
Audio Device(s) X-Fi XtremeGamer
Power Supply EVGA G2 750W
Mouse Logitech G500
Keyboard Corsair K70 RGB MX Brown
Software Windows 10
#2
Thanks for the heads up on a new rad.
 

LordJummy

New Member
Joined
May 13, 2011
Messages
1,403 (0.57/day)
Likes
246
Location
US of A
System Name Workstation1 | Asus G55VW-DS71
Processor i7 970 3.8GHz | i7 3610QM
Motherboard RIII Formula
Cooling EK 360 Supreme HF | Asus G55VW
Memory 24GB Dominator | 12GB DDR3
Video Card(s) 2x Diamond HD 6970 | GTX 660M
Storage 2x Vertex4 256GB | 256GB Vertex4 & 750GB HDD
Display(s) 3x Crossover 27" LED S-IPS + 30" DELL IPS
Case Corsair Obsidian 800D
Audio Device(s) X-Fi Titanium Fatal1ty Pro + Gigaworks G550W
Power Supply HX1000 + NZXT Black Sleeved Extensions
Software Win7Ult64Bit
Benchmark Scores ballz
#3
Show installed pics bro.

Thanks!