TheMonkey
New Member
- Joined
- Feb 11, 2008
- Messages
- 119 (0.02/day)
- Location
- Olympia WA
| System Name | Space Heater/BitPerfect |
|---|---|
| Processor | E8500@4.5 1.42V |
| Motherboard | DFI Blood Iron P35 |
| Cooling | Xigmatek "Thor's hammer" HDT-S126384 |
| Memory | 2x2GB Mushkin PC2 6400 (996557) 5-4-4-11 |
| Video Card(s) | ATi 5870 |
| Storage | Samsung F1 1tb x2 |
| Display(s) | Hanns*G HG-281DPB (1920x1200) |
| Case | Lian-Li PC-6070A PLUSII |
| Audio Device(s) | AuzentechXplosion-->SPDIF-->TubeMagicD1 DAC/PRE-->MCS 3865 dual-mono Integrated Amp-->DCM QEDs |
| Power Supply | PCP&C 750 |
| Software | Win7/XPsp3/Win2k3Serverx64 |
So i've been having fun clocking my C2D and have had moderate success so far, but i had a question about VTT voltages and GTL reference. I went ahead and read this article http://www.thetechrepository.com/showthread.php?t=87 but understood very little although it did get me on the right track for tweaking these settings, and thanks to this guide I was able to get my E6750 stable 3.36@1.42v as opposed to 1.45v and saved me a few degrees C. Can anyone give me an explanation of VTT, GTL reference and how they relate in simpler terms? Any insight on these mysterious settings would be great
.
.