Bractastic
New Member
- Joined
- Jan 28, 2008
- Messages
- 21 (0.00/day)
- Location
- Willow Grove, PA
Currently, I am having the biggest problem on deciding which is the best setup for my system... I have selected the parts I want to get already, they are listed below:
Radiators:
-Feser X-Changer 120mm Single
-Feser X-Changer 120mm Triple (17mm Fan Spaced)
-Black Ice Micro 2 80mm Dual
Tubing:
-Tygon 3603 3/8" ID 1/2" OD
Reservoir:
-EK MultiOption 150 Res.
Pump:
-Swiftech MCP-655 w/Controller
CPU Waterblock:
-Koolance CPU-340
VGA Waterblock:
-Koolance VID-428 (GTX 260/280 Waterblock)
Motherboard Chipset Waterblocks:
-Koolance CHC-122 (NB)
-Koolance CHC-125 (SB)
HDD Waterblock:
-Koolance HD-06 w/Dual HDD Kit
Fittings:
Koolance 3/8" ID 1/2" OD Compression Fittings x 22
Optional Cooling Parts:
-Koolance COV-PMP450A
-Thermal Star Thermo/Fan Bus
This is basically what I have been looking at. Yes, I know its going to cost some cash, but I have already invested some duckets in this beast of a build.
The dilemma arises when I draw out the loop. I will have to draft it later and post what I am talking about, cuz it is turkey day... Anyways, I want to run two loops with one pump. I know it is possible, since the pump cover Koolance offers has two sets of inlets/outlets.
Please let me know if the parts I am choosing are worth it. Should I be adding/removing stuff from this loop? I will try and get the drawing up here tonight. Anyways, have a happy Thanksgiving and enjoy!!!
-Bractastic
Radiators:
-Feser X-Changer 120mm Single
-Feser X-Changer 120mm Triple (17mm Fan Spaced)
-Black Ice Micro 2 80mm Dual
Tubing:
-Tygon 3603 3/8" ID 1/2" OD
Reservoir:
-EK MultiOption 150 Res.
Pump:
-Swiftech MCP-655 w/Controller
CPU Waterblock:
-Koolance CPU-340
VGA Waterblock:
-Koolance VID-428 (GTX 260/280 Waterblock)
Motherboard Chipset Waterblocks:
-Koolance CHC-122 (NB)
-Koolance CHC-125 (SB)
HDD Waterblock:
-Koolance HD-06 w/Dual HDD Kit
Fittings:
Koolance 3/8" ID 1/2" OD Compression Fittings x 22
Optional Cooling Parts:
-Koolance COV-PMP450A
-Thermal Star Thermo/Fan Bus
This is basically what I have been looking at. Yes, I know its going to cost some cash, but I have already invested some duckets in this beast of a build.
The dilemma arises when I draw out the loop. I will have to draft it later and post what I am talking about, cuz it is turkey day... Anyways, I want to run two loops with one pump. I know it is possible, since the pump cover Koolance offers has two sets of inlets/outlets.
Please let me know if the parts I am choosing are worth it. Should I be adding/removing stuff from this loop? I will try and get the drawing up here tonight. Anyways, have a happy Thanksgiving and enjoy!!!
-Bractastic