• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

what case do i have?

J

John in Dallas

New Member
Joined
Nov 15, 2016
Messages
2 (0.00/day)
hey guys - i'm sorry - i know i'm lame - but i have this case - i wanna "update it" with a new motherboard and graphics card and stuff but i don't know what case it is. it's older for sure - its an Asus i know that - and it lights up Blue when it's plugged in. I just pulled it out and dusted it off - i've been having to use a laptop for the past several years and i'm ready to go back to a desktop and i'd like to make this work. Can you guys help me out? i see some of the custom cases in here and i feel like i'm in the best place to learn a little about this box. it's a full tower, blue, asus with skulls on the fan covers. (E. R. Wood is just a bonus - was watching Westworld while writing this)
pc.jpg
 
All the fans look like they are 80mm. Its not a custom case and I dont think thats an ASUS case either, the design reminds me of an alienware, so it could be a clone, possibly. The ASUS sticker means it has ASUS parts inside.
 
Last edited:
I see what'cha mean AsRock - it does sorta resemble that chassis.

Death to Gnomes - that sticker you speak of - i only bought the case - i "built" the rest - putting the guts inside - so, 'power by asus' doesn't make sense - i really am at a loss - i bought i at Fry's - man - probably something like 2004'ish?!?!?

i ran across this - it's sorta like mine - but not - the door on the side has the same handle as mine - to access the hardware i mean.
https://mnpctech.com/chenming-dragon-full-tower-gaming-pc-case-mod-by-mnpctech.html
 
Standard ATX Itsa not a full tower. Its a Chieftec knock off so any ATX PSU and board will fit

I'm watching Westworld too
 
I would not bother trying to reuse that case. If it was in it's generic form, it would not be a problem. But since it has been rebranded by ASUS, I would not assume it has not been modified (read: made proprietary) too. Since "a new motherboard and graphics card and stuff" constitute a new computer, I say treat (and cool and protect) your "new computer" with a new case. I like Fractal Design. A proper case (along with a good PSU) form the foundation for a great computer that will provide many years of service and support many evolutions and upgrades without the worry of proprietary modifications affecting compatibilities.
 
I don't see a problem with OP reusing the chassis. Its what HE wants to do after all. Op didn't come here asking us what chassis to purchase, rather what is this chassis.
 
Athlon2K15 said:
I don't see a problem with OP reusing the chassis. Its what HE wants to do after all. Op didn't come here asking us what chassis to purchase, rather what is this chassis.
Click to expand...

Even more so if it is a Chenming as they were a very modifiable case, the Newegg link i posted was of one i got man years ago and they did a duel smaller fan just like that.


I guess he would have to check the mobo fittings and all to be sure.

EDIT: I got my case back in 2/13/2006.

Here's the one i was thinking of.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811125436
 
Last edited:
He came here seeking help. I gave what I feel was appropriate. I don't see it your place to dictate what opinions other posters should present. He is free to accept or ignore my advice, just as you are free to ignore and provide your own.

To the point of my advice, I do not assume posters, especially brand new posters who readily admit they have limited knowledge on the topic, know all the ins and outs of reusing factory branded cases.

I did not tell him what case to buy. I only said the brand I like.

The fact of the matter is, we cannot identify that case other than to confirm what we already know; it is an ASUS branded case. "Similar" to that Chenming means nothing. It is also "similar" to the Chieftec Dragon which is similar to the Antec 1080. But I sure would not assume ASUS did not modify it for their own purposes - as so many factory brands do.
 
Bill_Bright said:
we cannot identify that case
Click to expand...

You cannot. A little bit of google images shows otherwise.... http://www.devhardware.com/c/a/Computer-Cases/XPCases-XSuperalien-Case-Review/
Apevia also made a version of that chassis.... http://www.apevia.com/ProductsInfo.asp?KEY=ATXA6SW-BK/500

As to the sticker, it appears that there is an ASUS motherboard inside, they used to make baby poop yellow boards, and the sticker is askew, not something very professional looking to its placement.
 
My buddy had that exact same case back in the AGP days. Terrible, terrible case. Ports on the front stopped working, you'd cut your hands on the metal everytime you needed to do something inside, and eventually the molex connectors on the fans gave out. Somehow shorted and killed his motherboard.

Skull fan-grill is dope though!
 
Thanks for those examples sneekypeet and I agree those do "look like" the OP's much more than the Chenming, Chieftec or Antec. But are you really willing to state as fact ASUS did not modify that case? Certainly ASUS is not the extreme offender for making proprietary products like Dell, HP and others might be. But ASUS is not totally innocent either.

BUT, let's not forget the OP's case, in whatever flavor you pick, is old, obsolete and discontinued yet he wants to put a new motherboard in it. New motherboards come with USB 3.x support for front panel USB 3.0 ports. Also that case also only supports 80mm case fans. If you are going to spend good money on a modern motherboard, CPU, RAM, etc., doesn't just make good technical sense to use a modern case too?
 
Bill_Bright said:
Thanks for those examples sneekypeet and I agree those do "look like" the OP's much more than the Chenming, Chieftec or Antec. But are you really willing to state as fact ASUS did not modify that case? Certainly ASUS is not the extreme offender for making proprietary products like Dell, HP and others might be. But ASUS is not totally innocent either.

BUT, let's not forget the OP's case, in whatever flavor you pick, is old, obsolete and discontinued yet he wants to put a new motherboard in it. New motherboards come with USB 3.x support for front panel USB 3.0 ports. Also that case also only supports 80mm case fans. If you are going to spend good money on a modern motherboard, CPU, RAM, etc., doesn't just make good technical sense to use a modern case too?
Click to expand...

The asus sticker on the front obviously came out of a motherboard box. Back in the day, every motherboard, graphics card, processor, etc came with tons of stickers. The original person bought an asus motherboard and stuck the sticker on the case.

So yea, that case wasn't modified by asus, because the case wasn't made by asus. Asus has nothing whatsoever to do with that case.
 
Bill_Bright said:
But are you really willing to state as fact ASUS did not modify that case?
Click to expand...

Sure am! Another tip off is that it uses the see-through PSU that the Apevia sold with;)
If the OP wants to keep it, and just wants to know what it is, who are we to tell him otherwise. Yes he may not be able to use all the benefits of the newest gear, but he never said he was going brand new, just that he wanted to upgrade. Without more information on what he wants to buy, there are too many assumptions to say not to use it at all! "New" could simply mean new to him, not newest available.
 
OP, that case won't breathe. I would recommend no more than 200 watts between the CPU and the GPU. Just get a new case. Too many headaches.
 
Also, you'll probably have to replace the PSU. I think I still have the PSU that was in my buddy's case (it's the same PSU in yours, so it must have come with the case), and if I'm not mistaken it doesn't have a full-size motherboard plug. Heck, now that I think about it, it doesn't even have a 4-pin! That case is from the Pentium 4 days.

Would be super cool to rewire it for USB 3.0 and all the new goodies, take apart a modern PSU and mount it inside that PSU's case, etc. Would make a totally awesome retro build.
 
sneekypeet said:
Without more information on what he wants to buy, there are too many assumptions to say not to use it at all!
Click to expand...
You are right. But at the same time, I say there is not enough information and there are too many assumptions to say, "the case wasn't modified by ASUS" or to say there will be no problems using it.

Seeking advice on forums is very much like using Bing Google. If you don't know what to ask, you will not get "ALL" the information needed to make "informed" decisions. I believe that is where we (forum helpers) with our experience come in. Just because a poster asks about using a legacy product with a modern upgrade, that does not imply learning the pitfalls is not useful information. I think many would be upset to learn after the fact their old case would not support their new USB 3.0 devices.

And while I believe you can properly cool a computer in that case with 80mm fans (and fortunately, that case supports 6 x 80mm), the racket a bunch of 80mm fans make would be objectionable to many too.

Again, this is all just information the OP needs to make " fully informed" decisions. I think it is our duty as helpers to make sure the OP has that information - not to stifle others from providing it. The OP can take it or leave it as he desires.

Too much information is better than not enough.
 
Bill_Bright said:
I say there is not enough information and there are too many assumptions to say, "the case wasn't modified by ASUS"
Click to expand...

Bill you look at things to literally! Think outside the box. It appears to me as well as others to be a silver "Powered by Asus" sticker that used to come with all of their motherboards. If it were a true Asus logo on the case, it would have been placed in the center and not look like it was haphazardly stuck on by someone after buying the chassis. Simply put the chassis was not modified by Asus, just that it had some bling put on it from the end user.

This is what I see on the bezel, of course with the colors inverted....
s-l1000.jpg
 
Bill_Bright said:
I think it is our duty as helpers to make sure the OP has that information
Click to expand...

I think you need to stop bashing every single member that posts an idea you don't agree with. There is nothing wrong with that case. It is yet another Cheiftec Dragon clone. This particular model built by apevia and utilizing the apevia PSU. The case is well known and sought after for old school builds. There is plenty of airflow in it for modern hardware.

About a million years ago myself and freaksavior built a rig in one of those

0728081224.jpg
 
Also Ultra 'Aluminus' and Antec 'Plusview' based off this case. Very workable, even for modern builds. These are built extremely well and take a rather large amount of dremmeling ;)

PS: You can actually stuff 10Lbs of crap into this 5Lb bag LoLoL
 
m1dg3t said:
PS: You can actually stuff 10Lbs of crap into this 5Lb bag LoLoL
Click to expand...

Mine had an MCR220 and MCR320 in it after punching the top of the case out to fit, but I can't find pictures unluckily.
 
cdawall said:
I think you need to stop bashing every single member that posts an idea you don't agree with.
Click to expand...
Gee whiz. Where did I do that? Take a look in the mirror and then look above and see who is bashing others with personal insults for posting an idea. I did not bash anyone so who's on their high horse?

@sneekypeet - badges mean nothing. My shop builds custom PCs and I've been putting custom badges with my business logo and name on all our builds for years. That does not imply I modified or didn't modify the cases (I don't - unless requested by client - but not the point).

But okay - you win. The case is not modified and is 100% ATX compliant. It still does not support USB 3.x or large fans.
 
Bill_Bright said:
Gee whiz. Where did I do that? Take a look in the mirror and then look above and see who is bashing others with personal insults for posting an idea. I did not bash anyone so who's on their high horse?
Click to expand...

Every single thread you post in is derailed. You aren't special other people are allowed to do things you don't agree with. Really. Just let them be. You didn't offer an idea you, you didn't offer any assistance you told the guy to pitch his case in the bin and just buy a new one. Its obnoxious.
 
Last edited by a moderator:
Bill_Bright said:
It still does not support USB 3.x or large fans.
Click to expand...

And we have yet to know for sure that either of those requirements matter;)

Also if now badges mean nothing, what was all the fluff about this chassis being modded by Asus this whole time then?
 
You must log in or register to reply here.
Back
Top