- Joined
- Nov 13, 2007
- Messages
- 11,369 (1.76/day)
- Location
- Austin Texas
System Name | Arrow in the Knee |
---|---|
Processor | 265KF -50mv, 32 NGU 34 D2D 40 ring |
Motherboard | ASUS PRIME Z890-M |
Cooling | Thermalright Phantom Spirit EVO (Intake) |
Memory | 64GB DDR5 7200 CL34-44-44-44-88 TREFI 65535 |
Video Card(s) | RTX 4090 FE |
Storage | 2TB WD SN850, 4TB WD SN850X |
Display(s) | Alienware 32" 4k 240hz OLED |
Case | Jonsbo Z20 |
Audio Device(s) | Yes |
Power Supply | Corsair SF750 |
Mouse | DeathadderV2 X Hyperspeed |
Keyboard | Aula F75 cream switches |
Software | Windows 11 |
Benchmark Scores | They're pretty good, nothing crazy. |
I've always read that it's actually not a good idea to undervolt ryzen because although it looks like you gain performance but actually lose some. But if not I'd love to undervolt my processor if it meant better performance and lower temps without getting another cooler. I've done that with my i7-8750h laptop and it works so much better. How would I go about doing that?
You're not really undervolting, you're just telling it not to go above a certain voltage (1.275 - 1.3v) which with my 3600 is the sweet spot for 4.2 ghz and it made like 15C difference from normal PBO. Just do a standard OC in the bios with 1.275 or 1.28 v and 4.2Ghz and it will still do the CoolNQuiet and downclock and downvolt at idle/low volt, but it will go straight to 4.2 and that voltage at load without pumping the customary 1.42v into the chip.