Halos
New Member
- Joined
- Oct 26, 2009
- Messages
- 8 (0.00/day)
- Location
- Croatia, Europe
System Name | wtf |
---|---|
Processor | E6300@4.0ghz - 1.36v |
Motherboard | Ga P35-DS4 2.1 |
Cooling | CM TX2 |
Memory | 2x2 GB GSkill 1066 |
Video Card(s) | 3870x2 ddr3/s3 trio |
Storage | ST250 speddy |
Display(s) | Samsung 204B |
Case | Old school big tower moded |
Audio Device(s) | SB SE |
Power Supply | Corsair CX400 |
Benchmark Scores | SUPERpi1M = 12.704sec 3dmark03= 74000 3dmark06= 17922 |
Hi all, well i will make my introducing post later, this is more important.
Well, i have x1800GTO...that dont work anymore.
Here is the deal, it is not very strong card, i have 3870x2 as we speak, but that is not the point. Point is that i am trying to fix it...it is a legendary card
One day i wanted to flash it with x1800XL/XT bios, and i used RBE and rabit for editing HEX viev, so i can open 16 pipes. Well, i think RBE renamed bios od my 3870x2(which i was flashing few days ago..actualy the bigger 64kb 3870x2 bios). I didnt noticed that, i dont know how was it done, i didnt worked nothing with it..just x1800 bios. Well somehow the x1800.bin was acctually 3870 bios, with x1800 name on.
Well, i have PCI card, i flashed it from DOS, with atiflash. normal, not forced...
atiflash -p 0 x1800.bin
But that x1800.bin was 3870...as i said
After reboot, it wasnt woprking any more. I tryed forced flashing, i tried everithing that can do something good from atiflash but, i always get the NO ADAPTER FOUND.
I know, it is not bih deal, x1800 is worth about 20$, but it is that feeling, when you must fix it. I red the whole forum, and everything that is wrong flashed, but. Same everywhere...no fix for that mistake.
I heard something about connecting pins on chip on card...anyone know somethin about it??
I thank you for reading this post, you will have something interesting to talk and laugh at work
p.s. i am serious about fix-ing it
Well, i have x1800GTO...that dont work anymore.
Here is the deal, it is not very strong card, i have 3870x2 as we speak, but that is not the point. Point is that i am trying to fix it...it is a legendary card
One day i wanted to flash it with x1800XL/XT bios, and i used RBE and rabit for editing HEX viev, so i can open 16 pipes. Well, i think RBE renamed bios od my 3870x2(which i was flashing few days ago..actualy the bigger 64kb 3870x2 bios). I didnt noticed that, i dont know how was it done, i didnt worked nothing with it..just x1800 bios. Well somehow the x1800.bin was acctually 3870 bios, with x1800 name on.
Well, i have PCI card, i flashed it from DOS, with atiflash. normal, not forced...
atiflash -p 0 x1800.bin
But that x1800.bin was 3870...as i said
After reboot, it wasnt woprking any more. I tryed forced flashing, i tried everithing that can do something good from atiflash but, i always get the NO ADAPTER FOUND.
I know, it is not bih deal, x1800 is worth about 20$, but it is that feeling, when you must fix it. I red the whole forum, and everything that is wrong flashed, but. Same everywhere...no fix for that mistake.
I heard something about connecting pins on chip on card...anyone know somethin about it??
I thank you for reading this post, you will have something interesting to talk and laugh at work
p.s. i am serious about fix-ing it