ShadowFlare
New Member
- Joined
- Sep 20, 2005
- Messages
- 542 (0.08/day)
Processor | Athlon 64 Venice 3200+ 2.0 GHz, max 2.6 GHz with Zalman CNPS7000B-AlCu |
---|---|
Motherboard | EpoX 9NPA+Ultra nForce4 Ultra with Zalman ZM-NB47J |
Cooling | All Zalman heatsinks (CNPS7000B-AlCu, ZM-NB47J, VF700-Cu) |
Memory | 1 GB (2x512 MB) DDR400 Corsair XMS C2 series, max 233 MHz @ 2-3-2-9 1T |
Video Card(s) | Sapphire Radeon X800GTO2 256 MB PCIe max 540/600, modded to 16 pipes |
Storage | Seagate 80GB SATA, Maxtor 160GB PATA, Maxtor 200GB PATA |
Display(s) | Dell 17" Trinitron CRT |
Case | Lian Li PC-60B Plus |
Audio Device(s) | Built-in Realtek chip |
Power Supply | Enermax Noisetaker EG495AX-VE, 485 watts, active PFC |
Software | Windows XP Pro SP2, Windows XP Pro x64, Windows Vista RC1 32-bit |
The only risk would be if the flashing got interrupted or if the file somehow got corrupted before you flashed it. The values I'll be working with in the bios would be within what I've already tested and know to work since I've already had one success with it, I just want to find exactly which one out of those values is what makes the change so that no unnecessary changes are made.a007fan said:ShadowFlare,
thanks much for your answer.
I should get the card within a week and will most definitely contact you again then.
I don't mind doing multiple trials as long as I don't incur the risk of damaging the card for good.
I thought it was a pretty straighforward thing to do! I heard there is a jumper on the back and then using Rabit you can just look for the pal/ntsc feature and choose accordingly.
Do you know otherwise?
thanks.
There is a jumper on some cards, but I think it may only be for determining whether to use pal or ntsc for the TV out. I've checked in RaBiT, there isn't a way to change it in there. The information it gives did help me where to look, though.