- Joined
- Feb 10, 2007
- Messages
- 2,680 (0.42/day)
- Location
- Oulu, Finland
System Name | Enslaver :) |
---|---|
Processor | Ryzen 7 7800X3D |
Motherboard | ASUS TUF Gaming B650-Plus |
Cooling | CPU: Noctua D15 G2, Case: 2 front in, 1 rear out |
Memory | 2x16GB Kingston Fury Beast RGB 6000MHz |
Video Card(s) | ASUS TUF RTX 4070Ti OC |
Storage | Samsung Evo Plus 1TB NVMe , internal WD Red 4TB for storage, WD Book 8TB |
Display(s) | LG CX OLED 65" |
Case | Lian Li LANCOOL II Mesh C Performance |
Audio Device(s) | HDMI audio powering Dolby Digital audio on 5.1 Z960 speaker system |
Power Supply | Corsair RM850x |
Mouse | Logitech G700 |
Keyboard | ASUS Strix Tactic Pro |
Software | Windows 11 Pro x64 |
Hi!
A friend of mine has a Zyxel NAS540 and need help in its installation.
Problem is that it is connected right and shows up in network on the PC but only has predefined folders like Video etc.
He created 1 raid volume and one non raid volume but they dont show up by default in network on the PC.
How can he program the NAS to show up as 2 different volumes like the HDDs are in network places?
The manual:
ftp://ftp2.zyxel.com/NAS540/user_guide/NAS540_ed1.pdf
THX a lot for help and reading
A friend of mine has a Zyxel NAS540 and need help in its installation.
Problem is that it is connected right and shows up in network on the PC but only has predefined folders like Video etc.
He created 1 raid volume and one non raid volume but they dont show up by default in network on the PC.
How can he program the NAS to show up as 2 different volumes like the HDDs are in network places?
The manual:
ftp://ftp2.zyxel.com/NAS540/user_guide/NAS540_ed1.pdf
THX a lot for help and reading