Monday, December 20th 2010

Gainward GTX 570 Phantom Graphics Card Pictured

Gainward is readying a new GeForce GTX 570 non-reference design that features an innovative new cooling solution, which earns the card its name - the Gainward GTX 570 Phantom. The cooler makes use of a black aluminum fin array, to which heat is fed by six heat pipes. Instead of fans on its obverse side blowing air onto the PCB, there are three fans on its reverse side, drawing air from the aluminum fin array, and onto the PCB. The PCB also seems to be a non-reference design.

The Gainward GTX 570 Phantom uses overclocked speeds of 750 MHz core, 1500 MHz CUDA cores, and 3900 MHz (GDDR5 effective) memory. Like every other GTX 570, it's based on the new 40 nm GF110 silicon, features 480 CUDA cores, and connects to 1280 MB of memory over a 320-bit GDDR5 memory interface. Display connectivity is similar to some AMD Radeon graphics cards: two DVI, one HDMI and one DisplayPort. Pricing and availability is not known.
Source: OCAU
Add your own comment

46 Comments on Gainward GTX 570 Phantom Graphics Card Pictured

#26
bear jesus
pantherx12Read the review in the source link in first post.
:laugh: i never thought to look, i just assumed it was a press release.

I must admit it's pretty impressive, i only scanned over the results but with the overclock they used it happily beats the 580 in most of their tests while being pretty cool and quiet.
Posted on Reply
#27
Bjorn_Of_Iceland
nINJAkECILActually, the warranty sticker is blocking one screw. Leaving you with "do not mess with me" message.

And yes, I like the name and the design


img.techpowerup.org/101220/108dc.jpg
yes. its in the unisink. Unlike the stocks, palit covers it on one of the gpu screw. Like I said, its a good thing this time since you can change the tims on the gpu with this one.
Posted on Reply
#28
erocker
*
It looks great though I have concerns with the heatpipes being on the motherboard side.
Posted on Reply
#29
bear jesus
erockerIt looks great though I have concerns with the heatpipes being on the motherboard side.
I kinda prefer them like that, i know gravity has little effect on heat pipes but i like to pretend it does :laugh: it was one of the things i loved about the zalman vf1000
Posted on Reply
#30
pantherx12
erockerIt looks great though I have concerns with the heatpipes being on the motherboard side.
Why is that?

It would still have to be within some size specifcation so should never cause any issues.

( I prefer rear facing heatpipes myself, but due to the other way covering up the ram meaning troublesome ram cooling options!)
Posted on Reply
#31
bear jesus
pantherx12due to the other way covering up the ram meaning troublesome ram cooling options
I totally forgot about that, multiple coolers with heat pipes facing the other direction come with ultra low profile sinks for the ram chips in their path or those chips get no heatsink, i know ram chips don't exactly need much cooling but i still prefer all the chips to have the same amount of cooling... even if no logic is required :laugh:
Posted on Reply
#32
pantherx12
bear jesusI totally forgot about that, multiple coolers with heat pipes facing the other direction come with ultra low profile sinks for the ram chips in their path or those chips get no heatsink, i know ram chips don't exactly need much cooling but i still prefer all the chips to have the same amount of cooling... even if no logic is required :laugh:
You'd be surprised, when I ran my 5770 memory @ 5780mhz they got hot as BS :laugh: although to be fair, that was quite out of spec.
Posted on Reply
#33
bear jesus
pantherx12You'd be surprised, when I ran my 5770 memory @ 5780mhz they got hot as BS :laugh: although to be fair, that was quite out of spec.
5780mhz :eek: i have not got past about 4500 or 4600 on anything but i must admit i have always had heat sinks and plenty of air flow so honestly i should not know if they get hot or not :laugh:
Posted on Reply
#34
dir_d
Very sleek design, i like it alot.
Posted on Reply
#35
jsfitz54
I'm very curious about design. Looks good. Won't you send me one to try?
Posted on Reply
#37
OneCool






something wrong there?

Where can I buy that 5850 at :cool:
Posted on Reply
#38
t77snapshot
DO WANT:D
erockerIt looks great though I have concerns with the heatpipes being on the motherboard side.
bear jesusI kinda prefer them like that, i know gravity has little effect on heat pipes but i like to pretend it does :laugh: it was one of the things i loved about the zalman vf1000
You know I really like when the heatpipes are showing, I just love the look of nickle plated pipes running across a one or more cards. As for performance, wouldn't a side fan cool the pipes better rather then being hidden back against the board? I can see how some users would like the pipes in the back for a less show and more stealth look.;)
Posted on Reply
#39
pantherx12
bear jesus5780mhz :eek: i have not got past about 4500 or 4600 on anything but i must admit i have always had heat sinks and plenty of air flow so honestly i should not know if they get hot or not :laugh:
My 5770 before I killed it was golden, done 1ghz on stock volts and overclock the ram right the way to CCC limits!

Stupid psu death! :laugh:
Posted on Reply
#40
erocker
*
pantherx12Why is that?

It would still have to be within some size specifcation so should never cause any issues.

( I prefer rear facing heatpipes myself, but due to the other way covering up the ram meaning troublesome ram cooling options!)
It's not a big deal, it's just heat. If one already has a north bridge that gets rather hot, having these heatpipes so close to it and the motherboard isn't going to help. Plus, I gess it would look cooler if the heatpipes faced outward.. to me anyways. Now, if someone gave me this cooler to put on my card would I? Damn stright! It's one of the best looking I've ever seen.
Posted on Reply
#41
iLLz
MoonPigHi,

My names MoonPig, and i approve this cooler.
Hi MoonPig, my name is iLLz, and I approve of your avatar! :pimp: :toast:
Posted on Reply
#42
[H]@RD5TUFF
Does anyone know what their warranty is like and if this will be sold in the US because if it is, sorry EVGA, I may skip you this gen.
Posted on Reply
#43
WarEagleAU
Bird of Prey
Best card ever. I love AMD but Id get that just cause of that bad ass cooling design :[
Posted on Reply
#44
bear jesus
sneekypeetI'm finding myself looking for the tubing and pump;) Is clean looking though.
The first thing i thought was that it looked like a radiator had been attached but now i find myself wondering if it would be possible to do so, almost like the old sapphire X1900 XTX that came with a custom water cooler.

I wish Asetek would come up with an all in one GPU water cooler like they have done for CPU coolers, possibly a triple 92mm radiator to screw to a card :laugh:
Posted on Reply
#45
Athlonite
nINJAkECILActually, the warranty sticker is blocking one screw. Leaving you with "do not mess with me" message.

And yes, I like the name and the design


img.techpowerup.org/101220/108dc.jpg
um it just says don't remove nothing about making a hole in it to undo the screw if it were going to make a difference it should state "do not damage or warranty void".....
Posted on Reply
#46
sneekypeet
Retired Super Moderator
bear jesusThe first thing i thought was that it looked like a radiator had been attached but now i find myself wondering if it would be possible to do so, almost like the old sapphire X1900 XTX that came with a custom water cooler.

I wish Asetek would come up with an all in one GPU water cooler like they have done for CPU coolers, possibly a triple 92mm radiator to screw to a card :laugh:
Judging by what I saw from the CoolIT kit, it is feasible, and should be able to handle the heat better than air, just that they are uber expensive for results just slightly better than air:(
Posted on Reply
Add your own comment
May 8th, 2024 23:08 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts