Friday, November 16th 2012

Nanoxia Announces the Deep Silence 2 PC Case

Following the success of our first PC case, the award-winning Nanoxia Deep Silence 1, we now present to you the next model, the Deep Silence 2: The Nanoxia Deep Silence 2 is a particularly spacious mid-tower which, due to its extraordinary depth, offers a huge amount of internal space for demanding hardware configurations. Of course, the Deep Silence 2 is fully soundproofed and prepared for water cooling systems.

A specially designed Mounting Bracket on the HDD cage can be used to mount 240 or 120 mm radiators, which can be equipped with up to four 120 mm fans. Thanks to a depth of 588 mm, collisions with motherboard components or power supply are virtually eliminated.


Included are three Nanoxia Deep Silence 120 mm fans (approx. 1,300 RPM), which can be operated using the 2-channel fan controller. The Tower can accommodate E-ATX motherboards and up to seven hard drives - the maximum cooler height is 165 mm.

The Nanoxia Deep Silence 2 will be available at the end of December 2012.

Deep Silence 2 Specifications

● Form factor: E-ATX, ATX, M-ATX, Mini-ITX
● 5.25 inch drive bay external: 3 x
● 3.5 inch drive bay external: 1 x (optional)
● 3.5 inch drive bay internal: 7 x
● Case Fan (Front): 2 x 120 mm
● Case Fan (Rear): 1 x 120 mm
● Case Fan (Mounting Bracket): 2 x 120 mm (optional)
● Case Fan (Top): 2 x 120/140 mm (optional)
● Case Fan (Bottom): 1 x 120/140 mm (optional)
● Case Fan (Left Sidepanel): 1 x 120/140 mm (optional)
● Height: 468 mm
● Width: 207 mm
● Depth: 588 mm
● Material: 0.7 mm steel
Add your own comment

15 Comments on Nanoxia Announces the Deep Silence 2 PC Case

#1
Jack1n
Very simplistic yet efficient,i like it.
Posted on Reply
#2
hckngrtfakt
Almost reminds me of the Antec sonata with a certain influence from the p180

*borat's voice*


Ahhhh liiiek !!!!







:D
Posted on Reply
#3
brian111
It's got some Fractal Define and Antec P280 in it also.
Posted on Reply
#4
LAN_deRf_HA
Whats the deal with these tiny rear feet cases?
Posted on Reply
#5
t77snapshot
by: LAN_deRf_HA
Whats the deal with these tiny rear feet cases?
To make room for the dust filter of course, it would be less cost efficient to widen the case just for larger feet. Then again, Nanoxia could have probably redesigned the dust filter instead.:rolleyes:
Posted on Reply
#6
THE_EGG
All I see is a slightly modded Fractal Design R3 with less vents on the front panel and a split half size door (antec sonata as someone else said). :/
Posted on Reply
#7
KieranD
So all they did was remove the cool looking air chimney, add in options to stick internal fans and a stamped out side grill for the side panel rather than a cut out.
Looks exactly like a fractal clone now.

The Deep Silence 1 only came out recently right?
Posted on Reply
#8
Vancha
Wait, they got rid of the air chimney? One of the few things that set them apart?

Stepping backwards, Nanoxia...
Posted on Reply
#9
sneekypeet
Unpaid Babysitter
by: Vancha
Wait, they got rid of the air chimney? One of the few things that set them apart?

Stepping backwards, Nanoxia...
The air chimney was noting more than a top piece that lifted up (to allow convective airflow out of the top). Want the chimney back? Remove one of the top fan covers and poof, you have it back;)
Posted on Reply
#10
blibba
I don't like how they didn't paint the back of the exterior, and I think with those feet the PSU will suffocate on a carpeted floor. I prefer not to have top or side ventilation, but that's just personal preference. Other than that, seems good.
Posted on Reply
#11
KieranD
by: blibba
I don't like how they didn't paint the back of the exterior, and I think with those feet the PSU will suffocate on a carpeted floor. I prefer not to have top or side ventilation, but that's just personal preference. Other than that, seems good.
The back of the chassis is the same colour as the internal, if you buy a white case you get a white back and so on.

Personally i may purchase this case but i will have to read some reviews first. I also looked at the older case and the dimensions are different this one is deeper than the "older" model and it has a slightly different motherboard tray layout. Some of the changes are minor but the more i look the more i like it over the older case. Actually i prefer the way the fans are mounted on the front of the old case, the new case has them on one bracket rather than the 2 separate pieces that swing open.
Posted on Reply
#12
Vancha
by: sneekypeet
The air chimney was noting more than a top piece that lifted up (to allow convective airflow out of the top). Want the chimney back? Remove one of the top fan covers and poof, you have it back;)
It's not quite the same...Besides, don't you have to remove the fan covers from the inside? That's a hell of a lot less convenient.
Posted on Reply
#13
sneekypeet
Unpaid Babysitter
by: Vancha
It's not quite the same...Besides, don't you have to remove the fan covers from the inside? That's a hell of a lot less convenient.
I get that it is not as convenient, but there is no way to rid the chassis of convective air flow, just ways to cover the top of the "chimney". So even though the top is a little less convenient to use, they still technically keep the air chimney.
Posted on Reply
#14
Depth
by: Cristian_25H
due to its extraordinary depth,



Well this is a good addition to any product, I dare say.
Posted on Reply
#15
Vancha
by: sneekypeet
I get that it is not as convenient, but there is no way to rid the chassis of convective air flow, just ways to cover the top of the "chimney". So even though the top is a little less convenient to use, they still technically keep the air chimney.
They could cut a jagged hole in the side of the Nonoxia Deep Silence 3 and technically create a window, but given what they've shown themselves to be capable of, I'd honestly expect a little more.
Posted on Reply
Add your own comment