Thursday, January 17th 2013

AMD Catalyst 13.1 WHQL Drivers Released

AMD posted its first major release of the Catalyst software suite for this year, Catalyst 13.1 WHQL. Much along the lines of its 12.11 "Never Settle" driver, the new 13.1 WHQL brings performance enhancements for a boatload of games, targeting Radeon HD 7000 series GPUs based on the Graphics CoreNext (GCN) architecture. We know that AMD is yet to unlock the full potential of GCN, and 13.1 WHQL appears to be a step in that direction. In addition to performance enhancements and fixes, AMD introduced a new 3D settings and profile management user interface within Catalyst Control Center (CCC).

DOWNLOAD: AMD Catalyst 13.1 WHQL for Windows 8/7/Vista 64-bit, Windows 8/7/Vista 32-bit, Windows XP 32-bit, Windows XP 64-bit

A slice of the change-log follows.

Performance Highlights of AMD Catalyst 13.1 (vs. AMD Catalyst 12.10): Includes all of the performance improvements found in AMD Catalyst 12.11 Beta 11
Performance gains seen on the entire AMD Radeon HD 7000 Series, with all game being tested at high / extreme / ultra levels:
  • Enhanced performance in Far Cry 3 (up to 25% with 8xMSAA, SSAO enabled @ 1600p, and up to 15% with 8xMSAA, HDAO enabled @1600p) (AMD Catalyst 12.11 CAP2 must also be installed)
  • Enhanced AMD CrossFire scaling performance in Call of Duty Black Ops 2
  • Up to 10%-15% more performance in Battlefield 3 in most cases
  • More than 20% in certain missions and sequences (Comrades)
  • Up to 7% more performance in Metro 2033
  • Up to 10% more performance in DiRT Showdown
  • Up to 8% more performance in Sleeping Dogs
  • Up to 12% more performance in Civilization V
  • Up to 10% more performance in StarCraft II
  • Up to 8% more performance in Sniper Elite: V2
  • Up to 5% more performance in Max Payne 3
AMD Catalyst Mobility 7970M performance for AMD Enduro technology supported platforms has been improved for DirectX 9, DirectX 10 and DirectX 11 applications:
  • 3DMark 06 – Up to 6%
  • 3DMark Vantage – Up to 15%
  • 3DMark 11 – Up to 12%
  • AvP – Up to 11%
  • Battlefield 3 – Up to 25%
  • Call of Duty: Black Ops – Up to 13%
  • Crysis 2: Up to 45%
  • DiRT Showdown – Up to 62%
  • ETQW – Up to 8%
  • Hard Reset – Up to 8%
  • Just Cause 2 – Up to 90%
  • Mafia 2 – Up to 40%
  • The Chronicles of Riddick – Up to 4%
  • Shogun 2 – Up to 56%
  • StarCraft 2 – Up to 25%
  • Skyrim – Up to 45%
  • Sniper Elite V2 – Up to 60%
  • Tom Clancy's HAWX – Up to 56%
  • Unigine Heaven – Up to 33%
  • Wolfenstein – Up to 9%
Resolved Issues for the Windows 8 / Windows 7 Operating Systems:
This section provides information on resolved known issues in this release of the AMD Catalyst 13.1 software suite.
  • A sporadic system hang encountered with a single AMD Radeon HD 7000 Series GPU seen on X58 and X79 chipsets.
  • An intermittent hang encountered with AMD Radeon HD 7000 Series GPUs in an AMD CrossFire + Eyefinity setup.
  • Missing fonts in XBMC
  • No video found in Media Player Classic Home Cinema when using full or half floating point processing
  • Skyrim lighting (missing a lighting pass) for the AMD Radeon HD 7900 Series
  • Skyrim cloud corruption experience in various in game locations
  • A hang playing Dishonored on the AMD Radeon HD 6000 and AMD Radeon HD 5000 Series
  • Engine and memory clocks running too high when the GPU is idle.
  • GPU activity runs at lower values than expected seen on the AMD Radeon HD 7870.
  • Corruption seen in Darkness 2 and Carrier Command when using AMD CrossFire configurations
  • Adobe Premier Pro CS6 may fail to launch
  • Hang experienced with AMD Crossfire and Eyefinity enabled on X58 and X78 chipsets
  • Corel PaintShop Pro X3 – Hangs at the "Initializing Command Manager" window
  • Company of Heroes 2 – display corruption experienced when AA is enabled in the AMD Catalyst Control Center
  • Cyberlink Powerdirector 10 crashes intermittently.
  • Company of Heroes : Tales of Valor – Flickering experienced when AA is disabled
  • Max Payne 3 – Flickering experienced in DirectX 9 mode with forced AA enabled
  • Cyberlink PoweDVD 10 – crashes intermittently
  • VLC - Green texture corruption seen in 720p MPEG2 video clips
  • Black screen encountered when "Alternate DVI mode" is enabled in the AMD Catalyst Control Center
  • Green display corruption seen in Skype webcam video
Add your own comment

82 Comments on AMD Catalyst 13.1 WHQL Drivers Released

#1
Mussels
Moderprator
yeah dont use driver sweeper programs, except as a last resort before a format. they do bad things.
Posted on Reply
#2
Techtu
by: Prima.Vera
This is what happened to me after using crappy Drive Sweeper or similar. Had to re-install Windows...
I finally found a way around it, not really sure what part of it actually got it to work but it works!

I think it was uninstalling a Windows update I had issues with over the past couple of weeks and disabling the automatic Windows driver updating. Not quite sure why either one of these or even both of these together would of worked for me but hey ho, Windows 8 for you...

On another note, I scored 360 points less with the new driver over the 12.10 in 3Dmark 11?
Posted on Reply
#3
Grnfinger
Working great with my 7870's and my 5970
7870's seem to run a few degrees cooler on 13.1

No frame rate improvement on the 5970 but it still run's stable.
Posted on Reply
#4
narf
Keeps ruining my Windows 8 installation

Once in a while on shutdown CCC.exe crashes. I have this .NET broadcasting message that tells me that an unknown application caused a problem. Up to this point the system (Windows 8 Pro) is still fully functional. However as soon as I click the "OK" button, Windows 8 goes BSOD.

And after reboot I'm stuck in an infinite automatic repair mode which for a second shows that is is checking my hard drives for errors but immediately reboots. 10 times, 20 times... it just keeps going. I then have to insert my Win8 installation media. Unfortunately not to recover anything but to re-install windows once again. The whole system drive (C:) is completely empty. No windows 8 installation can be found there anymore.

I cannot forcefully reproduce this error but it surely appears frequently. Last time today. And yesterday and before that two weeks ago. So basically I have two options - either use Windows 7 again or use another display driver. Unfortunately I need CCC because otherwise my old school HD 4850 board makes hell of a noise... and the fan speed is always fluctuating which really really drives you mad. :banghead:
Posted on Reply
#5
Mussels
Moderprator
narf: 13.4 is out, why not update and try those? no ones posted in this thread since january.
Posted on Reply
#6
narf
13.4 is still beta so i considered this to still be an active thread. And I have Win8 only for a couple of weeks now.

Anyway im sorry i will find a better place to post to :-)
Posted on Reply
#7
Random Murderer
The Anti-Midas
by: narf
13.4 is still beta so i considered this to still be an active thread. And I have Win8 only for a couple of weeks now.

Anyway im sorry i will find a better place to post to :-)
13.4 is WHQL. 13.5 is beta.
Posted on Reply