Monday, May 27th 2013

Titan Launches Dragonfly CPU Coolers

Taiwanese PC cooling company Titan expanded its Dragonfly line of low-noise CPU coolers with two additions, the Dragonfly 3 (model: TTC-NC85TZ/RB) and Dragonfly 4 (TTC-NC95TZ/RB), pictured in that order. Both coolers are built in the aluminum fin tower-type form-factors, with heat pipes fanning out throughout the stacks, rather than passing through its edges. This ensures a more uniform heat transfer to the stack. The two use exposed copper heat pipes that make direct contact with the CPU.

Measuring 100 x 71.4 x 150 mm, the Dragonfly 3 uses three heat pipes, and a 95 mm PWM-controlled fan to ventilate its fin-stack. The fan has a wide speed range, spanning from 210 to 2,100 RPM, with noise levels as low as 5 dBA, and as high as 28.6 dBA. The Dragonfly 4, on the other hand, measures 120 x 71.4 x 160 mm, uses four heat pipes, and a larger 120 mm fan that spins at 150 to 1,500 RPM, with noise levels under 5 dBA at its lowest operational speed, and 28.6 dBA at its highest. Both coolers support modern CPU socket types, including LGA115x, LGA775, LGA1366, LGA2011, AM3+/AM3/AM2+/AM2, and FM2/FM1. The company didn't release pricing or availability information.
Add your own comment

5 Comments on Titan Launches Dragonfly CPU Coolers

#1
FreedomEclipse
~Technological Technocrat~
Id like to see how well these coolers perform given their compact design over the other tower coolers.
Posted on Reply
#2
de.das.dude
Pro Indian Modder
by: FreedomEclipse
Id like to see how well these coolers perform given their compact design over the other tower coolers.
they will perform worse :)
Posted on Reply
#3
james888
Look at the curvy fins. Interesting.




If I was going for a low height cooler, I think I would be looking at a top down cooler instead.
Posted on Reply
#5
m1dg3t
Fans look junk and not enough fins in the fin stack! They look eerily similar to some other MFGs coolers :wtf: But cheaper of course...
Posted on Reply