Wednesday, August 27th 2008

AMD Phenom X2 Information Trickles

Time draws closer for the Athlon 64 X2 to retire. It has seen its good and bad days, leading Intel versus the Pentium D and trailing it versus the Core 2 Duo. German site Hardware Infos shed light on the primary lineup of the dual-core edition based on the K10 architecture, the Phenom X2. There are no core architectural changes for the Phenom X2, codenamed "Kuma" over the K8, except that like the Phenom X3 and X4, these chips feature 2 MB of L3 cache apart from 512 KB caches per core and the revised HyperTransport interface. The listed models come at a rated TDP of 45W. The first three Kuma chips listed have clock-speeds ranging from 1.90 GHz to 2.30 GHz and have been given model numbers that look confusing to the older PRN system AMD employed, with the top Athlon 64 X2 rated at 6400+. The later releases of the older X2 using the Brisbane core broke away from the older PRN and we saw models such as 4450e, 4850e or 4850b (note the absence of the "+").

The naming of these chips asserts that. For example, the 1.90 GHz Kuma part is named Phenom X2 GE-6400. Going by the performance evaluations of other parts based on the K10 architecture, at 1.90 GHz + the 2 MB L3 cache, this part might not be on par with the Windsor core Athlon 64 X2 6400+. Contradicting earlier reports that AMD would work out Kuma parts on the 45 nm fabrication process, all three Kuma parts reported are based on the 65 nm fab process.

The Phenom X2 GE-6400 has a clock speed of 1.90 GHz, the GE-6500 has a clock speed of 2.10 GHz and the GE-6600 even higher at 2.30 GHz. All parts feature 512 KB of L2 cache per core, a 2 MB L3 cache, HyperTransport 3.0 link speed of 1600 MHz (3200 MT/s) and rated TDP of 45W. Pricing and availability remain to be seen.
Source: Hardware Infos
Add your own comment

35 Comments on AMD Phenom X2 Information Trickles

#1
xfire
Are these 2 core disabled quad cores or some thing else?
Posted on Reply
#2
blueskynis
Propably two cores are disabled...
Posted on Reply
#3
newtekie1
Semi-Retired Folder
Phenom is a flop, it performs poorly, overclocks like crap, and only worth looking at because of price. AMD needs to move onto something else, the Phenom processors are the Pentium D's of the Quad-Core World.
Posted on Reply
#4
wiak
dont mess with ma phenom bowhahaha
Posted on Reply
#5
mdm-adph
newtekie1Phenom is a flop, it performs poorly, overclocks like crap, and only worth looking at because of price. AMD needs to move onto something else, the Phenom processors are the Pentium D's of the Quad-Core World.
Complain complain complain. :shadedshu Do I even need to look to see what brand you're running? :laugh:

1) It's not a flop -- somewhat of a "letdown," yes, but certainly not a flop. The latest Intel offerings are just hard to beat, that's all, but here's a comparison -- just because my Corvette is slower than your Ferrari doesn't mean my Corvette is a "flop."

2) It performs on par with equal-clocked conroe parts -- where's the poor performance? :confused:

3) It overclocks quite well from what I've seen -- or is a 3.4GHz overclock (I've seen tons of examples) from a stock of 2.6 not good enough? Let me remind you that most of the later batches of Q6600's are having trouble getting above 3.2GHz.

4) And the fact that it's worth looking at because of the price is a good thing. :D
Posted on Reply
#7
[I.R.A]_FBi
based on the current market standard teh phenom is a letdown
Posted on Reply
#8
lemonadesoda
Sadly for AMD, the phenom is a letdown phenomenon.

...but the R700 GPUs are ok ;)
Posted on Reply
#9
blueskynis
There are no core architectural changes for the Phenom X2, codenamed "Kuma" over the K8...
...so there is no core architectural changes for the Phenom X4 either?

lemonade, how come you have so many stars? :D
Posted on Reply
#10
johnnyfiive
newtekie1Phenom is a flop, it performs poorly, overclocks like crap, and only worth looking at because of price. AMD needs to move onto something else, the Phenom processors are the Pentium D's of the Quad-Core World.
:rolleyes:
Posted on Reply
#11
candle_86
the phenom isn't a let down, for its price/preformance its great, quad and triple are super cheap because of AMD.
Posted on Reply
#12
xfire
and don't forget the great IGP platfrom it can be coupled with.
Posted on Reply
#13
newtekie1
Semi-Retired Folder
mdm-adphComplain complain complain. :shadedshu Do I even need to look to see what brand you're running? :laugh:
Look at rig3 and prepare to be amazed!:slap:
mdm-adph1) It's not a flop -- somewhat of a "letdown," yes, but certainly not a flop. The latest Intel offerings are just hard to beat, that's all, but here's a comparison -- just because my Corvette is slower than your Ferrari doesn't mean my Corvette is a "flop."
After the insanely huge hype over the K10 architecture, yes I would put it in the category of flop. The Corvette wasn't touted and hyped up to be a Ferrari killer and then released only to perform worse.
mdm-adph2) It performs on par with equal-clocked conroe parts -- where's the poor performance? :confused:
www.tomshardware.com/charts/cpu-charts-2007/3dmark06-cpu,370.html?p=1275%2C1308

No, they don't perform on par with equally-clocked Intel parts. Look at the X4 9700@2.4Ghz vs. the Q6600@2.4GHz. I didn't go through every single test they ran, but I looked at most of them, and there wasn't a single one I saw where the Phenom matched or beat the Q6600 at the same clock speed. So I would like a little proof that the Phenom parts are equal to Intel parts clock for clock.

Even if, and that is a big if at this point, they were equal clock for clock, due to Phenom's poor clock speed scaling, we don't see Phenom parts released at nearly the same clock speeds as Intel parts, and they certainly don't reach the same clock speeds when overclocked. The fastest Phenom x4 on the market is 2.6GHz, the fastest Core 2 Duo is 3.2GHz right now.
mdm-adph3) It overclocks quite well from what I've seen -- or is a 3.4GHz overclock (I've seen tons of examples) from a stock of 2.6 not good enough? Let me remind you that most of the later batches of Q6600's are having trouble getting above 3.2GHz.
I've seen very few Phenom X4's get to 3.4GHz, but I don't disagree it is possible. 3.4GHz from 2.6GHz is only 800MHz, just like a Q6600 at 3.2GHz from a stock of 2.4GHz. In the case of the Q6600, going to 3.2GHz from 2.4GHz is actually a better overclock than the X4 going from 2.6GHz to 3.4GHz, even though the final clock speed of the X4 is higher. They both only go up 800MHz. In the case of the Q6600, that is a 33% overclock, and with the X4 it is only a 30% overclock. Granted, not a huge difference, but in terms of percentage over stock(or how much you get for free), even the bad Q6600's were better than the X4's.

Though the Q6600 is old news. Look at something new, the Q6600 has been the focus of attention for long enough. Why not talk about the Q9400? The Q9400's are hitting 3.6GHz and beyond pretty easily.
mdm-adph4) And the fact that it's worth looking at because of the price is a good thing. :D
Yes, price is a good thing. Though if price is your concern, the Q6600 easily has the price market taken. Even the bad batches make it to 3.2GHz, and in the same price range you won't find a Phenom that will match it, both stock and overclocked. I know I said to look away from the Q6600, but it is just so hard!
Posted on Reply
#14
johnnyfiive
newtekie1Look at rig3 and prepare to be amazed!:slap:



After the insanely huge hype over the K10 architecture, yes I would put it in the category of flop. The Corvette wasn't touted and hyped up to be a Ferrari killer and then released only to perform worse.



www.tomshardware.com/charts/cpu-charts-2007/3dmark06-cpu,370.html?p=1275%2C1308

No, they don't perform on par with equally-clocked Intel parts. Look at the X4 9700@2.4Ghz vs. the Q6600@2.4GHz. I didn't go through every single test they ran, but I looked at most of them, and there wasn't a single one I saw where the Phenom matched or beat the Q6600 at the same clock speed. So I would like a little proof that the Phenom parts are equal to Intel parts clock for clock.

Even if, and that is a big if at this point, they were equal clock for clock, due to Phenom's poor clock speed scaling, we don't see Phenom parts released at nearly the same clock speeds as Intel parts, and they certainly don't reach the same clock speeds when overclocked. The fastest Phenom x4 on the market is 2.6GHz, the fastest Core 2 Duo is 3.2GHz right now.



I've seen very few Phenom X4's get to 3.4GHz, but I don't disagree it is possible. 3.4GHz from 2.6GHz is only 800MHz, just like a Q6600 at 3.2GHz from a stock of 2.4GHz. In the case of the Q6600, going to 3.2GHz from 2.4GHz is actually a better overclock than the X4 going from 2.6GHz to 3.4GHz, even though the final clock speed of the X4 is higher. They both only go up 800MHz. In the case of the Q6600, that is a 33% overclock, and with the X4 it is only a 30% overclock. Granted, not a huge difference, but in terms of percentage over stock(or how much you get for free), even the bad Q6600's were better than the X4's.

Though the Q6600 is old news. Look at something new, the Q6600 has been the focus of attention for long enough. Why not talk about the Q9400? The Q9400's are hitting 3.6GHz and beyond pretty easily.



Yes, price is a good thing. Though if price is your concern, the Q6600 easily has the price market taken. Even the bad batches make it to 3.2GHz, and in the same price range you won't find a Phenom that will match it, both stock and overclocked. I know I said to look away from the Q6600, but it is just so hard!
.. Thats what she said.
Posted on Reply
#15
blueskynis
www.tomshardware.com/charts/cpu-charts-2007/3dmark06-cpu,370.html?p=1275%2C1308

No, they don't perform on par with equally-clocked Intel parts. Look at the X4 9700@2.4Ghz vs. the Q6600@2.4GHz. I didn't go through every single test they ran, but I looked at most of them, and there wasn't a single one I saw where the Phenom matched or beat the Q6600 at the same clock speed. So I would like a little proof that the Phenom parts are equal to Intel parts clock for clock.
www.tomshardware.com/charts/cpu-charts-2007/premiere-pro-2-0,386.html?p=1275%2C1308 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/pinnacle-studio-11-plus,385.html?p=1308%2C1275 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/sisoftware-sandra-xi,396.html?p=1275%2C1308 (higher is better)
www.tomshardware.com/charts/cpu-charts-2007/mainconcept-h-264-encoder,380.html?p=1275%2C1308 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/hdtv-playback,377.html?p=1275%2C1308 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/winrar,402.html?p=1308%2C1275 (less is better)

...self explained... :rolleyes:
Posted on Reply
#16
suraswami
newtekie1www.tomshardware.com/charts/cpu-charts-2007/3dmark06-cpu,370.html?p=1275%2C1308

No, they don't perform on par with equally-clocked Intel parts. Look at the X4 9700@2.4Ghz vs. the Q6600@2.4GHz. I didn't go through every single test they ran, but I looked at most of them, and there wasn't a single one I saw where the Phenom matched or beat the Q6600 at the same clock speed. So I would like a little proof that the Phenom parts are equal to Intel parts clock for clock.
www.tomshardware.com/charts/cpu-charts-2007/mainconcept-h-264-encoder,380.html?p=1308%2C1275

www.tomshardware.com/charts/cpu-charts-2007/hdtv-playback,377.html?p=1275%2C1308

www.tomshardware.com/charts/cpu-charts-2007/winrar,402.html?p=1275%2C1308

:p
Posted on Reply
#17
suraswami
blueskyniswww.tomshardware.com/charts/cpu-charts-2007/premiere-pro-2-0,386.html?p=1275%2C1308 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/pinnacle-studio-11-plus,385.html?p=1308%2C1275 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/sisoftware-sandra-xi,396.html?p=1275%2C1308 (higher is better)
www.tomshardware.com/charts/cpu-charts-2007/mainconcept-h-264-encoder,380.html?p=1275%2C1308 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/hdtv-playback,377.html?p=1275%2C1308 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/winrar,402.html?p=1308%2C1275 (less is better)

...self explained... :rolleyes:
damn u beat me by 1 sec.
Posted on Reply
#18
blueskynis
suraswamidamn u beat me by 1 sec.
Because I use Intel Pentium Prescott 4 3GHz :laugh:
Posted on Reply
#19
newtekie1
Semi-Retired Folder
blueskyniswww.tomshardware.com/charts/cpu-charts-2007/premiere-pro-2-0,386.html?p=1275%2C1308 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/pinnacle-studio-11-plus,385.html?p=1308%2C1275 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/sisoftware-sandra-xi,396.html?p=1275%2C1308 (higher is better)
www.tomshardware.com/charts/cpu-charts-2007/mainconcept-h-264-encoder,380.html?p=1275%2C1308 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/hdtv-playback,377.html?p=1275%2C1308 (less is better)
www.tomshardware.com/charts/cpu-charts-2007/winrar,402.html?p=1308%2C1275

...self explained... :rolleyes:
Ok, so you managed to find 4 out of ~35 tests that the Phenom performs better in than the Q6600, and 1 of those tests is a synthetic memory benchmark that has no real world application or benefit.
Posted on Reply
#20
suraswami
blueskynisBecause I use Intel Pentium Prescott 4 3GHz :laugh:
Damn P4 3ghz performs better than my work PC's E6550?
Posted on Reply
#21
blueskynis
Nevertheless, E8400 @ stock beats the crap out of Q6600 and 9850 with current software. Maybe, in time, when software catches up with multithreading the performance lead will change in favor to quads.
newtekie1Ok, so you managed to find 4 out of ~35 tests that the Phenom performs better in than the Q6600, and 1 of those tests is a synthetic memory benchmark that has no real world application or benefit.
you said:
and there wasn't a single one I saw where the Phenom matched or beat the Q6600 at the same clock speed
Posted on Reply
#22
newtekie1
Semi-Retired Folder
blueskynisNevertheless, E8400 @ stock beats the crap out of Q6600 and 9850 with current software. Maybe, in time, when software catches up with multithreading the performance lead will change in favor to quads.



you said:
Not with all current software, just with software not optimized for multiple cores, there is software out there that benefits from 4 cores, but for the common user, a dual core is a better choice, I agree.

And the key there was, "I saw" I don't have the time to look through all 35 test, especially with Tom's slow load times. Appearently there are 4 tests where the Phenom matches or outperforms the Q6600, big deal. That certainly doesn't validate the statement that the Phenom/K10 architecture performs equally to Intel's Core 2 architecture clock for clock.
Posted on Reply
#23
WarEagleAU
Bird of Prey
Key here is Newtekie1, as much as I like you, you are pro Intel and nvidia. You do bi*** and moan about alot of things. Granted alot of stuff you do moan and gripe about has substance. I saw at least 8 tests they pointed out where the phenom was better, which you asked for. Now that its shown, you gripe and moan about that. bad form man, its just bad form.

right now intel is better, we dont dispute that.
Posted on Reply
#24
Kei
blueskynisPropably two cores are disabled...
More than likely these will be like the X3's with whatever cores not needed being disabled. The performance will be very good from these models as you don't have to wait to see how they perform since I've been using these 'exact' things for quite a while now. When you downcore a Phenom X4 it then for all intents and purposes becomes either an X3 Toliman or X2 Kuma.

See attatched screenshots and you'll see what I mean about that. The power consumption is fantastic with these setups as they don't take very much voltage to run at all. Then again the energy performance from the X4 lineup is awesome as well IF you know what you're doing as they don't need the voltage they come with stock to actually run at those speeds, they're overvolted by a healthy amount. Knock that down and the temps and power consumption fall like a rock.

On my low power setting I'm running my Phenom 9850BE at 1.8Ghz which is MORE than enough speed to do anything (including play games with no lag at 60fps for almost anything) and I only need a ridiculously low 0.912v to do so. If people call that bad power consumption performance they must be using calculators to make their posts...

Even running at stock speed of 2.5Ghz I only need 1.072v which is nothing. I don't use H20 cooling or anything like that, I'm on air cooling all the time mounted inside a full tower case. My fan stays on silent mode at ALL times no matter the load and still never reaches a temp that even makes me care. Fan speed max is 2000+rpm (110cfm) yet as you see in the pics I don't even need half of that to get my system to run cool and not make a peep. The CPU fan is listed at the bottom of the list as Scythe110 (the other is my Scythe 40cfm side fan...which is more than what the cpu fan is doing).

These X2 Kuma's will be sweet indeed especially if they offer a black edition model. Either way it'll be sweet if they still decide to go with it.

K


(No offense, but Newtekie1 please don't reply to this, thank you :))
Posted on Reply
#25
newtekie1
Semi-Retired Folder
WarEagleAUKey here is Newtekie1, as much as I like you, you are pro Intel and nvidia. You do bi*** and moan about alot of things. Granted alot of stuff you do moan and gripe about has substance. I saw at least 8 tests they pointed out where the phenom was better, which you asked for. Now that its shown, you gripe and moan about that. bad form man, its just bad form.

right now intel is better, we dont dispute that.
I'm not pro anyone, I buy and build using what is the best price to performance at the moment. The problem is that most on this site are pro AMD/ATi, so any time I am negative about them, it is notices, any time I am negative about nVidia/Intel it goes unnoticed. If you look at some of my posts, you will see be bitching and moaning plenty about Intel/nVidia, it just goes unnoticed by you and others because your are the ones that are actually biased.

And get your facts straight, stop trying to make your side look better. They pointed out 6 tests and repeated 3 of them, but in 2 of those 6 the Intel was still outperforming the Phenom, which makes me wonder why they posted them, look at the 6 they pointed out and you will see this yourself. That leaves 4 where the Phenom managed to match or better the Intel at the same clock speed, and one was a synthetic memory test that AMD has been winning for ages due to their integrated memory controller, it has no real world impact. Matching or besting in 4 out of 35 tests is far from supporting the claim that the Phenom processors are equal to the Core 2 processors clock for clock. That statement just isn't accurate at all, no matter how much you want to say it is and try to argue.
Posted on Reply
Add your own comment
Apr 23rd, 2024 05:32 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts