Recent content by MaXiMuM GaMeR

Hi all I have asus maximus iv extreme motherboard Intel core i7 3770K Corsair dominator gt 1866mhz ram The problem is that the cpu ratio can't go over 35 and when increase the ram freq to 1866 system won't boot .... The board never behaved like this before but the last time I tried to overclock...

So .... Do I need a new power supply ? I have two power supplies 1 GIGABYTE ODIN GT 800 wat 2 CoolerMaster Silent Pro 1200wat Gold

Hi everyone, I have MSI GTX770 Lightning, The card works just fine as long the Voltage is under 1.27V Once the voltage reaches 1.28V The whole PC halts (no Blue screens or regular shutdown, it just turns off) and then starts again . can anybody help me with that ? Thanks in advance :D

Hi all I have a strange problem with the MSI MPower Z77 when overclocking .. My CPU is 3770K I go to BIOS and do all the oc settings (4.6GHz @1.280V) the problem is when I enter my OS Which is windows 8 64bit I check on CPU-z and I find the stock CPU ratio and when I benchmark using...

I know that , I tried but the screen I have only suxxxx :banghead::banghead:

oooh The stand will be buried in the stuff on my table and usually its unseen .... all I need is the best comfortable for the eyes ... low brightness :D

Seasonic, Enermax, Ultra and Odin

Aha Thanks for the Assist but is it better than the HP Pavilion ? this one : http://citycenter.jo/index.php?route=product/product&path=18_71&product_id=58

Hi all I have a SAMSUNG SuncMaster SA100 19 inch display, The problem with this display is the very high brightness, so its uncomfortable for the eyes ..... I buying a new FULL HD display and I need advice about what to buy the aspect I'm looking for is comfortable to the eyes or not...

You have only one choice left ..... Chipset reflow Remove the little heatsink down the motherboard beside the PCI slots and heat the chip with a heat gun for 20 minutes and low air flow, and if not working try to have a new motherboard :D

760 for sure cause its cheaper and more solid performance while also less power consumption and temps . :D

I'm overclocking my 2600K on MSI MPower Z77 .... I increase the CPU Multiplier in BIOS but CPU-Z never recognizes that ..... any help ? :banghead::banghead::banghead::banghead:

The problem is when I overclock to 4.6GHz eveything works fine but when I run the Prime 95 and watch the CPU Multiplier on the CPU-Z ......... I see the CPU Multiplier stepping down and getting up from 41 to 46 most of the time its not 46 Specs : MSI MPower Z77 intel core i7 2600k...

Hi all, What are the settings and feature that must be disabled when Overclocking Z77 Platform ?:cry:

I want to do Chipset replacement ...... I do that manually with simple kit and I want that to be done automatically