BuzaL
New Member
- Joined
- Oct 14, 2006
- Messages
- 2 (0.00/day)
- Location
- Budapest
Processor | iP4 2.4GHz, 533 FSB, L2: 512M, 478 slot |
---|---|
Motherboard | ASUS P4S533 |
Cooling | Orig. Intel cooler from a iP4 1.7GHz BOX version |
Memory | Samsung 256 + KingMax 256+512, DDR 400 |
Video Card(s) | Palit ATI X1600Pro, 256MB DDR2 on 600 core / 432 mem. |
Storage | Samsung 80Gb |
Display(s) | Samsung SyncMaster 730BF + MAG 786PF |
Case | Gray - SuperPower (SP) |
Audio Device(s) | on board (CMI8738) |
Power Supply | 400W - CODEGEN (by SP) |
Software | WinXP Prof. Hun, WoW :) |
Hello,
I tried first the beta 14. It was fine, but show my pipelines 4 instead of 12.
I used the beta 15. I can't changed clock/mem. with this revision.
I checked the newest, the beta 16 pre3. I try to set back my settings to default: get freezed. (blue horizontal lines, and full hangup)
I checked the X1000 settings. I played for some minutes and I turned off the "Override BIOS parsing for finer clock control". Then the tool getting better.
BTW, the b16pre3 show my pipelines 4 too.
Some lines from the log:
And here some info from Overclocking section, which doesn't appeared in the LOG:
Regards.: BuzaL
p.s.: does anyone know, why running 2 ATI2EVXX on my PC?
I tried first the beta 14. It was fine, but show my pipelines 4 instead of 12.
I used the beta 15. I can't changed clock/mem. with this revision.
I checked the newest, the beta 16 pre3. I try to set back my settings to default: get freezed. (blue horizontal lines, and full hangup)
I checked the X1000 settings. I played for some minutes and I turned off the "Override BIOS parsing for finer clock control". Then the tool getting better.
BTW, the b16pre3 show my pipelines 4 too.
Some lines from the log:
Code:
2006-10-14 04:38:54 D Successfully connected to driver, version 124
2006-10-14 04:38:54 D Found ATI device: 0x1002 0x71C2 bus 1 dev 0
2006-10-14 04:38:54 D fbPhy: 0xE0000000, mmrPhy: 0xBF800000.
2006-10-14 04:38:54 D mmapped mmr to 0x1840000
2006-10-14 04:38:54 D BIOS at 0xC0000
2006-10-14 04:38:54 D mmapped bios to 0x1850000
2006-10-14 04:38:54 D LM63 temp chip detection: failed (0x0)
2006-10-14 04:38:54 D F75373 temp chip detection: failed (I2C)
2006-10-14 04:38:54 D Temperature monitoring: Not detected
2006-10-14 04:38:54 D VT1103 chip detection: failed (0x0)
2006-10-14 04:38:54 D Device initialized successfully
2006-10-14 04:38:54 I Suspending ATI2EVXX.EXE 956
2006-10-14 04:38:54 I Suspending ATI2EVXX.EXE 1268
2006-10-14 04:39:01 I Loading profile 'X1650Pro':
2006-10-14 04:39:01 I Core clock: 499.50 MHz -> 600.75 MHz
2006-10-14 04:39:01 I Mem clock: 391.50 MHz -> 441.00 MHz
2006-10-14 04:39:01 I Done
Code:
GB_PIPE_SELECT = 0x1E4
Regards.: BuzaL
p.s.: does anyone know, why running 2 ATI2EVXX on my PC?