EK Water Blocks will be releasing their fourth fifth-cover water block for GeForce 680 GTX series graphics card, this time for EVGA's GeForce GTX 680 FTW series graphics graphics cards:

- 04G-P4-3687
- 02G-P4-3686

The upcoming EK-FC680 GTX FTW water block will directly cool the GPU, RAM as well as VRM (voltage regulation module) as water will flow directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC680 GTX FTW+ water block will also features a very high flow design therefore it could easily be used in liquid cooling systems using weaker water pumps.

EK Water Blocks will be releasing their fourth full-cover water block for GeForce 680 GTX series graphics card, this time for Gigabyte's premium SuperOverclock (GV-N680SO-2GD) edition.

The upcoming EK-FC680 GTX SOC (abbrevated as) water block will directly cool the GPU, RAM as well as VRM (voltage regulation module) as water will flow directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC680 GTX SOC water block will also features a very high flow design therefore it could easily be used in liquid cooling systems using weaker water pumps.

EK Water Blocks, premium water cooling gear provider, will soon be releasing a Full-Cover water block for MSI N680GTX Lightning premium graphics card.

The upcoming EK-FC680 GTX Lightning (abbrevated as 'LTG') water block will directly cool the GPU, RAM as well as VRM (voltage regulation module) as water will flow directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC680 GTX Lightning water block will also features a very high flow design therefore it could easily be used in liquid cooling systems using weaker water pumps.

EK-Supremacy Elite, the premium bundle containing the best CPU water block on the market and the best thermal interface on the market - the EK-TIM Indigo Xtreme - is now finally shipping. Please note that due to high demand this product may be shown as out of stock at the time of purchase. These water blocks are therefore manufactured on daily basis to ensure adequate supply and daily re-stock.

EK-Supremacy Elite is the premium bundle containing the best CPU water block on the market - the EK-Supremacy - Full Nickel - and the best thermal interface on the market - the EK-TIM Indigo Xtreme. EK-Supremacy is a universal CPU water block that fits all modern CPU sockets with a universal mounting mechanism that offers error-preventing, tool-less installation. The result is a perfect installation which results in perfect performance every time. EK-Supremacy is truly the best product for performance seeking enthusiasts.

In case you feel a strange urge to liquid-cool a Radeon HD 7850, EK Water Blocks (EKWB) has just the thing for you. The company launched EK-FC7850, a block designed for reference and close-to-reference Radeon HD 7850 graphics cards. The compact EK-FC7850 is big enough to qualify as full-coverage, as it cools all essential components, including the GPU, memory, and VRM areas. Further, it's available in nickel and acetal+nickel variants. The primary material of the block is copper. The EK-FC7850 Acetal is priced at €80.95, while the EK-FC7850 Acetal+Nickel goes for €86.95.

EK Water Blocks, premium water cooling gear provider, has released two new water blocks - the EK-FB KIT SR-X for EVGA Classified SR-X motherboard and the EK-FC7970 Lightning for MSI's premium R7970 Lightning graphics card.

EK-FB KIT SR-X full-board water block kit is a complete liquid cooling solution for EVGA Classified SR-X (270-SE-W888) motherboard. The water blocks directly cools Intel C606 southbridge (PCH), PLX PEX8784 PCIe lane splitter controller and power regulation (VRM / MOSFETs) module of both CPUs. Please note this water block cools exactly as much heat generating components as EVGA factory cooling solution. It is medium-high to high flow water block that can be easily used with systems using weaker water pumps. It is available in two variants - Nickel and Acetal+Nickel.

Not to be out-gunned by Aqua Computer, Ljubljana-based EK Water Blocks has also announced its own liquid cooling offerings for NVIDIA's GeForce GTX 680 graphics card. The EK-FC680 GTX series full cover (GPU, RAM, VRM) water blocks are designed to fit standard GTX 680 (and 670 apparently) cards and feature G1/4" threaded fittings can be used on both sides.

There are four blocks listed by EK, two priced at €84.95 that have an electrolytic copper base, and two with an electroless nickel (EN) plated base which cost €94.96. The blocks can have either a POM Acetal or an acrylic cover.

Another European company, EK Water Blocks (EKWB), is ready with its full-coverage water block for AMD's Radeon HD 7970 graphics card, the EK-FC7970. Unlike Aqua Computer's AquagrATIx 7900, the EK-FC7970 isn't launched, the company isn't taking orders yet, but it posted a teaser picture on its Facebook page. The picture reveals the block to use copper as its primary material, with an acetal top. It appears to have standard G1/4" threading. As a full-coverage block, it covers all the heat-producing components on the obverse side of the card's PCB, including the GPU, the twelve memory chips, and VRM. EKWB did not give out other specifications, price, or availability.

PowerColor is readying a new high-end Radeon HD 6990 based graphics card that's prepped for water-cooling, the PowerColor LCS HD 6990. Sticking to its LCS tradition, the new HD 6990 from PowerColor comes with a full-coverage water block made by EKWB, the EK-FC6990 pre-installed. The card sticks to AMD reference design PCB, and even uses the reference back-plate to cool memory chips on the reverse side of the PCB. The EK-FC6990 cools all heat-producing components on the obverse side, including the two Cayman GPUs, memory chips, VRM, and bridge chip. PowerColor's LCS HD 6990 is expected to come with out of the box overclocked speeds, and one can expect a hefty price-premium, taking the price closer or beyond the US $800~850 mark, or beyond.

EK Water Blocks released as many as eight water blocks for the GeForce 400 series, four each for the GTX 470 and GTX 480. All four carry essentially the same full-coverage monolithic design, but differ with the selection of materials. The EK-FC470 GTX and EK-FC480 GTX are base-models, which are copper-based, and which use clear acrylic tops. These are priced at 74.95€ and 80.00€, respectively. A little higher up, are the EK-FC470 GTX Acetal and EK-FC480 GTX Acetal, which use acetal top. These go for 77.65€ and 82.9€, respectively. A little further, is are the EK-FC470 GTX Nickel and EK-FC480 GTX Nickel, which use nickel-plated copper for the block, with clear acrylic top, priced at 80.95€ and 85.90€, respectively. At the highest-end are the EK-FC470 GTX Acetal+Nickel and EK-FC480 GTX Acetal+Nickel, which use nickel-plated copper blocks with acetal tops, priced at 84.95€ and 89.90€, respectively.

The monolithic full-coverage design ensures cooling for all vital components on the obverse-side of the PCB, including GPU, memory, and VRM. Heat dissipation over the GPU is done by wavy copper ridges. The blocks use G 1/4 threads for the optional fittings. EK has started taking orders for these on its online store.

TUL Corporation, a leading manufacturer of AMD graphics cards, is thrilled to announce the world's fastest GPU with liquid cooling solution: the PowerColor LCS HD5970 2GB GDDR5. Equipped with the award-winning EK cooling solution, LCS HD5970 enables superior gaming experiences, and easily boosts up the potential overclcoking ability in an ultra quite and cool operating environment.

PowerColor LCS HD5970 has a full water block mounted, which fully covers the memory and power regulator chip. With a copper base design, it is reduces temperature up to 30°C compared with the reference version. PowerColor packages a high-flow 3/8" and 1/2" fittings (barbs) to maximize water flow with captured o-rings to prevent leakage. Gamers can effortlessly customize their own liquid cooling system using these two fittings.

TUL Corporation, a leading manufacturer of AMD graphics cards, is excited to add liquid cooling to the world's fastest single GPU: the PowerColor Liquid Cooling Solution (LCS) HD5870 1GB GDDR5. Equipped with the award-winning EK cooling solution, the LCS HD5870 offers outstanding thermal performance in a single slot design, enhancing overclocking and allowing optimum stability.

The PowerColor LCS HD5870 has a full water block mounted on the card, fully covering the memory and power regulator chip. With a copper base design, it is able to reduce temperatures in the most efficient way possible. PowerColor packages a high-flow 3/8" and 1/2" fittings (barbs) to maximize water flow with captured o-rings to prevent leakage. Gamers can easily customize their own liquid cooling system using these two fittings.

TUL Corporation, a leading manufacturer of AMD graphics cards, is proud to announce the collaboration with award-winning liquid cooling solution provider, EK. The partnership brings a liquid cooling solution to the most powerful single GPU on the market today, the HD5870 series. EK cooling offers exceptional thermal performance and enhances gaming performance in a cool and stable operating environment.

The Liquid Cooling Solution (LCS) can completely dispel excessive heat within an airtight environment, enabling the heat to be dissipated in a quiet setting. The cooperation with EK allows PowerColor to bring another attractive option to the HD5870 series. This soon to be part of the Liquid Cooling Solution (LCS) product lineup, with full water block mounting on the card, helps deliver the perfect heat dissipation in a silent setting; allowing a perfect user experience like never before.

Slovenian water-cooling components specialist EK Water Blocks is readying one of the first water blocks for the AMD Radeon HD 5870 accelerator. Called EK FCS5870, it is a full-coverage water block from the looks of it, cooling all essential components on the PCB, including the GPU, memory, and VRM. The first picture below shows a CAD drawing of a design candidate. The second one is a picture of the ready copper block sans its top, revealing the water channel, and the heat-dissipation ribs over the GPU area. EK intends to complete the design of the FCS5870 by the end of this month.

EK Waterblocks rolled out a limited-edition variant of its popular EK Supreme universal CPU water block, the EK Supreme. This variant comes with gold-plated top and fittings for the extra bling in the case. According to German retailer Aquatuning, the company has only made 100 pieces, and each piece has its unique number marked on the unit, and has matching gold-plated fittings on offer. The base has a mirror-finish, and its retention mechanism supports all current CPU sockets, including LGA-1366, LGA-1156, LGA-775, LGA-771, AMD AM3/AM2+/AM2. The main unit is listed for 69.99 EUR, and the fittings are ranged reasonably on par with standard fittings.

Known for good performance and value when it comes to water blocks, EK Water Blocks has water block for most applications. The company is working on a full-coverage block specially designed for the EVGA X58 Classified series of motherboards. The block cools the most significant heat sources of the motherboard, namely the X58+ICH10R chipset, the companion NVIDIA BR-03 chips, and the VRM areas. A draft design surfaced on XtremeSystems Forums, revealing the complex construction of the cooler. The design is still under development, and could vary from the actual product.

TUL Corporation, a leading manufacturer of AMD graphics cards, announces a brand new graphics card for overclockers - PowerColor Liquid Cooling Solution, LCS HD4870. With EK Water Blocks cooling solution, PowerColor LCS HD4870 provides an extraordinary thermal performance in a single slot design, enhances overclocking ability to its optimum stability and delivers an extreme gaming performance.

EK Water Block today caught up with Danger Den and CoolIT, by introducing their full cover water block for Radeon HD 3870 X2. The EK's water block is available in three versions:

• EK-FC3870 X2 CF: base made of electrolytic copper, top made of quality acrylic glass and back ram heat sinks made of black anodized aluminium.
• EK-FC3870 X2 - Acetal CF: same as the original acrylic block, but the top is made of quality POM Acetal.
• EK-FC3870 X2 - CF Nickel: base is made of nickel plated copper, while top is made of quality acrylic glass and back ram heat sinks are made of black anodized aluminium.

All three versions weight about 920g and convert the HD 3870 X2 into single-slot cooled video card. The basic EK-FC 3870 X2 CF costs 109.95EUR, while the Acetal and CF Nickel models are priced at 114.95EUR and 119.95EUR respectively. All products should be available for direct purchase from EKWaterBlocks.com SHOP.