In early 2008, NVIDIA's GeForce 9600 GT, armed with a mere 64 shader units, 16 ROPs, 512 MB of memory, and an inviting price-tag, rattled competitor AMD's Radeon HD 3800 lineup. It allowed gamers to achieve playable framerates with cranked up visual details that were, until then, not possible with graphics cards in its price-segments. From that point on, NVIDIA realized it could gain a substantial market share in the sub-$250 price-segment, hovering around the $200 price-point, if it creates a GPU that can handle high-resolution gaming with a fair amount of eye-candy enabled. Continuing its legacy, NVIDIA's GeForce GTS 250, GeForce GTX 460, and GeForce GTX 660 are each successful products. In August, NVIDIA launched the GeForce GTX 660 Ti, a GPU that achieved a nice price-performance index in the $250-300 price-range. NVIDIA's next logical step would be to create a GPU that does the same with the $200-250 price-range. Enter the GeForce GTX 660.
Unlike its "Ti" cousin, the GeForce GTX 660 is not based on the GK104 silicon, from which several other GPUs, such as the GTX 670, GTX 680, and the dual-GPU GTX 690 are derived. The GTX 660 is, instead, based on the new GK106 silicon, which makes its desktop debut today. The GK106 is a physical downscale of GK104, which retains all its features, including component hierarchy, but has fewer numbers of them. The GK106 silicon is smaller, with a die-area of 221 mm² and transistor count of 2.54 billion (compared to 294 mm² and 3.54 billion of the GK104). The GK106 is built on the same 28 nanometer silicon fabrication process. A smaller chip results in reduced power draw. A case in point is that the GeForce GTX 660 needs power from just one 6-pin PCIe power connector; the GTX 660 Ti needs two of them.
As mentioned before, components on the GK106 maintain the same hierarchy as on GK104, and the two provide the same exact feature-set. The chip is based on NVIDIA's successful GeForce Kepler architecture. While GK104 packs eight graphics processing clusters (GPCs), with a total of sixteen streaming multiprocessor (SMX) units, holding 192 CUDA cores each, amounting to a total of 1,536 CUDA cores; the GK106 packs three GPCs, and five SMX units, totaling 960 CUDA cores. It's interesting to note that NVIDIA created a GPC with just one SMX unit, if the block diagram is anything to go by. Perhaps the chip really does have six SMX units, but it's kept out of the block diagram, perhaps to help harvest the chip better.
The GK106 silicon packs a total of 960 CUDA cores, with 80 texture memory units (TMUs), 24 raster operations processors (ROPs), and a 192-bit wide GDDR5 memory interface. As with the GeForce GTX 660 Ti, NVIDIA set 2 GB as the standard memory amount for the GeForce GTX 660. A 192-bit wide memory interface, populated with six memory chips of the same 2 Gbit density, should, typically, result in a memory amount of 1.5 GB. NVIDIA populated two of the six 32-bit wide paths with two piggy-backed 2 Gbit chips, each. The cards thus end up with eight 2 Gbit memory chips and 2 GB of memory. The 25% narrower memory bus width shouldn't worry you because NVIDIA uses 6.00 GHz memory clock speed, resulting in a memory bandwidth of 144 GB/s. The GPU core is clocked at 980 MHz with a GPU Boost frequency of 1033 MHz.
The Gigabyte GTX 660 Windforce OC uses the company's signature custom cooler and pairs it with a nice overclock out of the box to provide that extra speed bost.
GTX 560 Ti
GTX 660 Ti
|Memory Size||1024 MB||1024 MB||1024 MB||1024 MB||2048 MB||1280 MB||2048 MB||2048 MB||2048 MB||2048 MB||2048 MB||1536 MB||2048 MB||3072 MB|
|Memory Bus Width||128 bit||256 bit||256 bit||256 bit||256 bit||320 bit||256 bit||256 bit||192 bit||192 bit||256 bit||384 bit||192 bit||384 bit|
|Core Clock||1058 MHz||810 MHz||900 MHz||823 MHz||800 MHz||732 MHz||880 MHz||860 MHz||980 MHz+||1033 MHz+||1000 MHz||772 MHz||915 MHz+||800 MHz|
|Memory Clock||1250 MHz||1002 MHz||1050 MHz||1002 MHz||1250 MHz||950 MHz||1375 MHz||1200 MHz||1502 MHz||1502 MHz||1200 MHz||1002 MHz||1502 MHz||1250 MHz|