Wednesday, March 28th 2012

Gainward GeForce GTX 680 Phantom Pictured

After launching its customary reference design GeForce GTX 680 graphics card, Gainward is working on its signature non-reference design, the Phantom. Gainward introduced this design with higher-end GeForce GTX 500 series models. Its concept revolves around an inverted fan-heatsink design, in which the fans are concealed by the aluminum fin array. Instead of blowing fresh air through the aluminum fins, it draws hot air from it, and quickly channels it away from the card. Heat is fed to the aluminum fins, by five 8 mm-thick nickel-plated copper heat pipes. The inverted fan-heatsink design gives the Phantom a nice aesthetic touch. Gainward is still applying finishing touches to its design.
Source: TweakTown
Add your own comment

19 Comments on Gainward GeForce GTX 680 Phantom Pictured

#1
specks
Its looks nice and clean but axial fans were designed to push air rather that pull. I want to see the temps of this card.
Posted on Reply
#3
Bjorn_Of_Iceland
I read the 580 phantom review before.. not that good from what I saw..
Posted on Reply
#4
Shurakai
Nice, always love the look of these coolers, can't wait for a review. :)
Posted on Reply
#5
arterius2
temps are prolly shit if its anything like the first one.
Posted on Reply
#6
PLAfiller
I guess if they remove the "cover grill" on top of the fans they will maybe get even better temps. And the Phantom cooler is 2.5 slots as opposed to Asus 3 slot one, so it's doing fine.
Posted on Reply
#7
arterius2
lZKoceI guess if they remove the "cover grill" on top of the fans they will maybe get even better temps. And the Phantom cooler is 2.5 slots as opposed to Asus 3 slot one, so it's doing fine.
why not compare this to something like MSI's twin frozr. Asus was in a world of fail ever since they thought 3-slots were "cool"
Posted on Reply
#8
DarkOCean
Make this double slot and i might be interested.
Posted on Reply
#9
MeanBruce
You can tell when competition is so extreme in a market, companies begin to do just anything different so they can stand away from the pack and gain market share, whether it makes any sense or not doesn’t seem to matter, “as long as it’s different than the others” seems to be the prevailing logic. Which in the long run is a good thing for enthusiasts, realizing now and then you must ward off the inanity.

…I like my fans on the outside, where they bloody well belong!:D
Posted on Reply
#10
Red_Machine
Gainward always made the best looking cards, IMO. Especially their 8800s.
Posted on Reply
#11
MeanBruce
Red_MachineGainward always made the best looking cards, IMO. Especially their 8800s.
Hard to beat Asus cooler designs for silence and icy temps! My 6870 fan idles at 15% in auto mode and is as audible as a Noctua 10db fan... Heard the triple slot Asus cards idle at 10%!:D
Posted on Reply
#14
okidna
MeanBruceWhoa! I love it, thanks for sharing, looks better than the cooler in the article!:D Beautiful card...

Never heard of Palit before now.
Palit is Gainward :D Actually, Palit owns Gainward.

IIRC, they use Palit brand for Asian market, and Gainward for US and Europe.
Posted on Reply
#15
Nordic
Does anyone agree that this looks like it doesn't have stacked power connectors?
Also I have had both twinfrozrs II and III. They cool well but are by no means quiet under load.
Posted on Reply
#16
seronx
Why didn't he removed the plastic sticker stuff... :roll:
Posted on Reply
#17
MeanBruce
james888Does anyone agree that this looks like it doesn't have stacked power connectors?
Also I have had both twinfrozrs II and III. They cool well but are by no means quiet under load.
So many complaints about the stacked pwr connectors, they must be a real pain. Is the cooler on the Palit card above a twinfrozrs III? If so how quiet is the cooler at idle? What rpm do the 3fans run at? Thanks!

I know this is off-thread but this review from Tom of the new Caselabs tower is just AWESOME! Every enthusiast should see it!

www.youtube.com/watch?v=wBDTBHVIJiA&list=UU_SN80_V2GymyCWM2oTYTeg&index=1&feature=plcp

and although Tom hints at smaller tower cases coming from Caselabs I found an article stating yes they would be producing smaller full and mid-tower chassis this year, in the 249 to 349 range. If anyone wants the link let me know.
Posted on Reply
#18
Nordic
MeanBruceSo many complaints about the stacked pwr connectors, they must be a real pain. Is the cooler on the Palit card above a twinfrozrs III? If so how quiet is the cooler at idle? What rpm do the 3fans run at? Thanks!
I wasnt complaining about the stacked power connectors. I just noticed how it seems that there is a lack of them.
Posted on Reply
Add your own comment
Apr 26th, 2024 23:35 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts