• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

TPU's Core i7 Overclocking and Feedback

hey guys i need your help on this one...I can't get my 920 to post at 170bclk or above. I've tried vcore up to 1.4 and 1.35vtt and it just won't post. memory is at 2:8 (1332mhz), uncore is at 16x. I'm prime stable right now at 3.5ghz 167bclk with a true. temps don't go above 55C so cooling isn't an issue. is there major setting I completely overlooked or is my 920 a pos?
 
1.4v vtt

leave ram on auto as well as uncore. thats what messes things up.
 
Even more proof that these Crucial sticks all have D9JNL chips. Buy @ crucial.com for the best price!

DSCF0432.jpg

DSCF0433.jpg
 
OMG....... the prices of the RAM went up... 5$ for 3gb kit 20$ for the 6gb... now its 105$ for the 6gb :( still a great buy but.......
 
Buy them @ Crucial.com. It's that simple :D
 
What are so great about these crucial memory?
 
I think we need to make sure that the 1366 mounting is included, because when I created a shopping cart, the 1366 mounting was a "recommended accessory"

They sell the HK3.0 in 1366 and 775 versions. The recommended accessory is only the backplate and you can install it without one. You just have to use the nuts. I'm gonna clarify the shopping list here...

Binge - 2 Heatkiller 1366 LT blocks
Paulieg - 1 Heatkiller 1366 (not decided on which), 1 backplate
DanishDevil - 1 Heatkiller 775 LT block, 1 775 backplate
Myself - 1 Heatkiller 1366 LT block, 1 backplate, some fans

I'm gonna keep the Euro/USD exchange rate the way it is right now according to Google: 1 Euro = 1.28400 U.S. dollars
That's for those who don't know how to PayPal foreign currency :D
 
1.4v vtt

leave ram on auto as well as uncore. thats what messes things up.

damnit i tried 1.33vcore, 1.4vtt, uncore, vdimm (tried 1.6vdimm as well) and ram timings on auto and it still won't post at 173bclk. i dropped the multi down to 12x and it doesn't post either. batch is 3838a and according to google its a pretty bad batch. any way i can rma the chip?
 
give it really high volts and then tell intel that you are having intermittent failures.
 
They sell the HK3.0 in 1366 and 775 versions. The recommended accessory is only the backplate and you can install it without one. You just have to use the nuts. I'm gonna clarify the shopping list here...

Binge - 2 Heatkiller 1366 LT blocks
Paulieg - 1 Heatkiller 1366 (not decided on which), 1 backplate
DanishDevil - 1 Heatkiller 775 LT block, 1 775 backplate
Myself - 1 Heatkiller 1366 LT block, 1 backplate, some fans

I'm gonna keep the Euro/USD exchange rate the way it is right now according to Google: 1 Euro = 1.28400 U.S. dollars
That's for those who don't know how to PayPal foreign currency :D

DD decided to wait out for a bit, no harm.

Binge - 2 Heatkiller 1366 LT blocks
Paulieg - 1 Heatkiller 1366 (not decided on which), 1 backplate
Myself - 1 Heatkiller 1366 LT block, 1 backplate, some fans

I'm sending Binge and Paulie PM's after this post to confirm everything, gonna order in some 4 hours.
 
WTF man...


my DFI is slowly dying i think.

1st the lan port now it wont boot. im getting bsod and reboots before i can even get into windows.

this is at stock settings. no overclock at all.

i cant even reload windows because it stops responding while reading the dvd.

WTF is the deal lately?
 
Weird stuff... Some problem in the power circuits maybe?
 
now i officially have a reason to be super pissed.

this fucking board wont run 2 295's at all. i cant even boot with 2 cards in.
 
now i officially have a reason to be super pissed.

this fucking board wont run 2 295's at all. i cant even boot with 2 cards in.

Wow, that's odd. I just did some benching with 2 4870's just fine. You just got a bum board. Sorry man. :(
 
no... DFI doesnt support 2 295's on this board. what a shitty idea. force people to get the more expensive board for it.
 
im getting the boot loop bullshit.

post, reboot, post, reboot, etc
 
no... DFI doesnt support 2 295's on this board. what a shitty idea. force people to get the more expensive board for it.


Just the 295's, or no support for any SLI config? The box/manual states it supports SLI.
 
i only have 2 295's.

one works fine. both alone work fine. but 2 on the board wont boot at all. only post
 
Man, That sucks. Any ideas why? Or is does it simply not support it?
 
ok im at 4.3GHz with my 920 tubro is enable and HT is Enable havent done any prime yet but i did validate it.....but my validation page is messed up have ut seen it look like this before lol


http://valid.canardpc.com/show_oc.php?id=514038
 
Back
Top