• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

$48.99 Samsung 30nm DDR3 1600 hitting 2133?!?

Thanks dumo I'm going to MC on Saturday to buy four stick of this; will look for that batch.

FYI got that $15 coupon to finally work for me but the whole thing was kind of a weird pain. First it wouldn't even show me the forum page as if I needed to be logged in, then tried again two days ago and could see the thread at AT. Then loaded the coupon link with my info and it came up but said something like invalid as "used too many times". But this one allowed you to pass it on to a friend as well so I put in my own info and hit submit and it emailed me a valid link.

Edit: Just got two sets of 8GB YKO-1205 $85 with the coupon after tax.
 
Last edited:
So far so great; my concerns about running on older IMC were unfounded (though perhaps also this 1205 batch just really kicks ass). So far 2160 9-10-10 at just 1.55v in bios (think my board overvolts .02 tho need to bust out the multimeter). Spent less than a half hour with them too so I don't even know what they can really do yet.

cPULR.jpg
 
Got it down to 1.53v in BIOS now with no other changes so far; maybe can run 2160 with even less. Trying to follow Dave's rec re. tWCL but I do not see that subtiming anywhere on my system.
 
NB: I have the non LP version of this memory, same chips, more easily available in EU.
Samsung M378B5273DH0-CH9. I paid around £36 delivered.

Really happy with this memory so far. I had to try for 2400 straight away - unfortunately no luck, with the timings in the TPU review, and 1.575v. Even tried 2T no joy.

Still 2133 was much easier to achieve. I'm currently running 9-10-10-28 1T with the subtimings still set for 2400 from the review (except the one thats CAS-1, that's now 8). Yes I could tweak these later. 1.5v seems nice and stable.

Considering these non-LP might not clock quite as well I am well pleased. This is on a mid range mATX P67 board with a 2500k at 4.5ghz (100 bclk).

I'm seriously considering buying another set for 16gb. Would this affect my overclocks do you think? Is RAM really about to go up in price? I doubt it's going down lol

PS i got 1206 memory but it took like 10 days to arrive !
 
Millennium said:
I'm seriously considering buying another set for 16gb. Would this affect my overclocks do you think?
Click to expand...

it could. all depends on your imc. you'll probably end up having to add vtt voltage and loosening timings slightly, but 2133-2200 is definitely achievable with 16GB and sandy bridge.
 
Yep these 1205s do 2400 11-11-11 1.65v on Lynnfield relatively no prob but not that impressed with the bandwidth numbers compared to 2160 9-10-10 so far; still tweaking and testing. Even got Memtest 4.1 #5 to pass as well as a MaxxMem run at 2400 10-11-11 1.66v with some loosened subs too but blue screened after like 5 minutes. No huge diff with CAS 10 that jumped out at me but didn't get screen.

Have two more sticks here to try out as well and thus can also test 16GB (and also a buddy's Sandy build to try them in).
 
Anyone got this set of RAM with a Phenom II x6? I can't overclock atm with my shitty RAM. It doesn( pass Prime95 blend tests UNDERclocked :(
 
1205s binned can do 2500 10-13-13-31 1T 1.65V HyperPi 32m and maxmem mem read @ 26100ish latency 41ns on Z77 or X79 with good imc on cpu
 
El_Mayo said:
Anyone got this set of RAM with a Phenom II x6? I can't overclock atm with my shitty RAM. It doesn( pass Prime95 blend tests UNDERclocked :(
Click to expand...

Did you look through the XS thread?
 
Up too 2208 so far still 9-10-10 and still under 1.6v. These are Mayos sticks! :D

IzooB.png
 
I don't understand what timings are, but is it as simple as getting any of the three numbers as low as possible = better? I.e I'm aiming for 2133, and then shave numbers on the timings? Or should I not really bother changing the timings
 
Yes, but its more of a curiosity thing. Changing timings doesnt affect the overall speed much.
 
when are we gona get ddr4?
 
Scheich said:
Yes, but its more of a curiosity thing. Changing timings doesnt affect the overall speed much.
Click to expand...

Actually that depends both on the specific timing as well as, to a lesser extent, the platform one is on. Apparently lower timings has more of a noticeable effect on AMD machines than Intel (where raw frequency/clock is king). And certain ones do affect bandwidth more than others, obviously main CAS Latency being the most significant. And sometimes there are some more obscure ones like tRD back on X48 which lowering one tick gave a couple few thousand more MB/s read in AIDA and such.

So Mayo you really just have to test and see what combo of clocks and timings gives you the best performance/bandwidth numbers on your machine. Most of the subtimings you can leave on AUTO if you'd like but can't hurt to play/test.
 
Last edited:
I am currently running 2x4gb of these with an fx-6100. Running at 1920mhz 9-9-9-24 @ 1.47v.

Anyone know, or have confirmed if it is possible to maintain a good speed and timings if another 2x4gb sticks where added?

I'm asking because I am thinking of adding another 8 gigs of these ram and considering how memory on AMD boards tend to do pretty poorly when all 4 ram slots are taken, it may be a bad idea.
 
anotheralex said:
I am currently running 2x4gb of these with an fx-6100. Running at 1920mhz 9-9-9-24 @ 1.47v.

Anyone know, or have confirmed if it is possible to maintain a good speed and timings if another 2x4gb sticks where added?

I'm asking because I am thinking of adding another 8 gigs of these ram and considering how memory on AMD boards tend to do pretty poorly when all 4 ram slots are taken, it may be a bad idea.
Click to expand...

Don't bother with 2 more sticks. ;)
 
Oh, okay, I guess it would be a bad idea.
Thanks.
 
anotheralex said:
Oh, okay, I guess it would be a bad idea.
Thanks.
Click to expand...

It's not that I think it's a bad idea...It's more that I do not see any benefit from doing so, except for the most extreme cases. If you do video rendering, or work on large projects in PHotoshop, go for it, but if not, it's not going to gin you anything performance-wise.

You could probably still hit the smae speeds, but it's take using teh 1600 MHz memory divider and upping the clock, as the 1866 divider works best with only two DIMM slots populated.
 
Oh, I was just going to use it as a Ram disk, for temporarily holding files.
Buying an ssd would probably be a better choice in the end.

As you said, keeping 4 slots of ram at 1866+ would require me to play with the settings in the bios again and look for the right stable settings, which I would rather avoid the headache, because repetitive testing.

Thanks again, it is good to hear this directly from an expert.
 
Hehe i've got 4 of these stickies running on my bulldozer and i've had them stable all the way up to 2100MHz with T1 and 11-11-11 timings, after that it got a bit fiddly and I wasnt able to keep them stable(with T1 atleast). I've been using them at 2040 with 9-10-10 timings for quite some time now and they run perfectly stable.

Sooo, if you refrain from buying 2 more sticks because of stability issues, dont, unless you plan running them at 2100+MHz.
 
Oh, that's good to hear, although, what voltage are you running it at 2040?
 
You must log in or register to reply here.
Back
Top