tempered glass side panel screws

[PcForge]

I am looking for some blue anodized thumb screws for my case (core g21) where can I find them?

 

[Norton]

http://www.performance-pcs.com/thumbscrews/shopby/color--blue/

 

[eidairaman1]

http://www.performance-pcs.com/thumbscrews/shopby/color--blue/

I would think X oxide has them along with Newegg even Amazon you just got to know what you're looking for

 

[PcForge]

the problem is I don't know what the screws are. here are some pics

 

[stinger608]

Them are just the ole standard course thread computer screws used in almost all cases. They are just flat is all. The screws that @Norton linked should work just fine.

 

[PcForge]

the treaded part on those screws are longer

 

[Norton]

the treaded part on those screws are longer

Check the depth of the hole with a thin piece of wire. Note that the link I provided shows M3 and 6-32 size screws- make sure you check which ones you have before you order

 

[the54thvoid]

If thread is longer, use a washer if it's only a small difference?

 

[jsfitz54]

the problem is I don't know what the screws are. here are some pics

From the pictures, second one, there appears to be a thin clear plastic washer on the screw. Is this for a motherboard, to isolate from electrical contact?

The threads and post seem short. How and where is this used in the case?

If this is for the glass panel and new screws are longer, get some small O-rings to compensate for depth.

These may be to large.

Clear:
https://www.amazon.com/Rubber-Dampe...id=1515353266&sr=8-3&keywords=computer+o-ring

Blue:
https://www.amazon.com/Cherry-Rubbe...rd_wg=AA7fM&psc=1&refRID=06PH586PVJBVQ007CYGS

 

[eidairaman1]

If thread is longer, use a washer if it's only a small difference?

The washer willactually protect the tempered glass portion of the case if it's even being used on that.