• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Post your Cinebench R23 Score

I got a friends 2500k I built years ago sitting downstairs. Stay tuned for score :p
 
This is the run I did for the Country Cup late last year that won me the 7700K I'm using now.
The speed reported by the bench is different that what CPU-Z shows and that's because I used the board's OC dial to run up the clocks before I hit the run button, was ran at the speed CPU-Z shows. :D

Sempy 145 CB15.jpg
 
Some Coffee with my Z170M OCF. ;)

Just testing stock right now with slow mems...
snaphsot0002.png
 
Here's one that's a bit better. This chip is pretty good, only issue is that it's extremely temp sensitive and also runs quite hot. :p On lighter loads it will run 5.4 - 5.5GHz @ 1.4 - 1.425V.
This is under sub-zero water BTW.

snaphsot0001.png
 
Here's one that's a bit better. This chip is pretty good, only issue is that it's extremely temp sensitive and also runs quite hot. :p On lighter loads it will run 5.4 - 5.5GHz @ 1.4 - 1.425V.
This is under sub-zero water BTW.

View attachment 100585
nice thats a great score :), added
 
nice thats a great score :), added
Thanks. BTW you have 5500MHz instead of 5200 for the freq column. I only wish it could do R15 @ 5.5GHz. :laugh:

Will probably redo it again soon but with a properly optimized OS and 4200 12-11-11 mems if I can get them to run stable enough on air.
 
Thanks. BTW you have 5500MHz instead of 5200 for the freq column. I only wish it could do R15 @ 5.5GHz. :laugh:

Will probably redo it again soon but with a properly optimized OS and 4200 12-11-11 mems if I can get them to run stable enough on air.
fixed
 
Got another 2700X for you LN2 this time at 5.5GHz 2504 CB

cb15 2504.JPG
 
Got another 2700X for you LN2 this time at 5.5GHz 2504 CB

View attachment 100617
Im going to add this and add a cooling section in table

Here's one that's a bit better. This chip is pretty good, only issue is that it's extremely temp sensitive and also runs quite hot. :p On lighter loads it will run 5.4 - 5.5GHz @ 1.4 - 1.425V.
This is under sub-zero water BTW.

View attachment 100585
integrated cooling in table, what is the offical name for sub zero water? Chilled Loop?

i will now show multiple entries of the same chip if you describe one is using different cooling

Air is the default so many will be wrong, but i will fix if someone tells me

my Ryzen 1700X
please do more benchmarks and what cooling did your 1700X use
 
Im late -- I got locked out of friends PC and he couldnt remember the password so i had to do a fresh reinstall.

If i remember correctly. The base setup was almost identical to my own 2500k setup back in the day except Ive given him my faster ram that I no longer need. 1600mhz to 2133Mhz DDR3

2500k-cinebench.png


He RTB'd cuz of crashing but i found the problem and fixed it so he benched the wholeidea of going with a complete overhaul. I was looking forward to putting him together a AMD system.
 
Im late -- I got locked out of friends PC and he couldnt remember the password so i had to do a fresh reinstall.

If i remember correctly. The base setup was almost identical to my own 2500k setup back in the day except Ive given him my faster ram that I no longer need. 1600mhz to 2133Mhz DDR3

2500k-cinebench.png


He RTB'd cuz of crashing but i found the problem and fixed it so he benched the wholeidea of going with a complete overhaul. I was looking forward to putting him together a AMD system.
added :D
 
Im late -- I got locked out of friends PC and he couldnt remember the password so i had to do a fresh reinstall.
If i remember correctly. The base setup was almost identical to my own 2500k setup back in the day except Ive given him my faster ram that I no longer need. 1600mhz to 2133Mhz DDR3
He RTB'd cuz of crashing but i found the problem and fixed it so he benched the wholeidea of going with a complete overhaul. I was looking forward to putting him together a AMD system.

What ram and timings did you use for the run? :)
 
What ram and timings did you use for the run? :)

Just the XMP profile -- the ram itself is DDR3 2400 but SB can only run 2133 natively so CL11-12-12 @1.65V

He lives over 100miles away from me so i try not to do too much extreme tuning to his PC.
 
Just the XMP profile -- the ram itself is DDR3 2400 but SB can only run 2133 natively so CL11-12-12 @1.65V

He lives over 100miles away from me so i try not to do too much extreme tuning to his PC.

I can well understand that! :) Thanks for the reply :)
 
Here's my imac run.

i5 2400s is 4c 4t btw, cinebench doesn't seem to know that, I'll run cinebench on my i7 930 rig when i get the time tomorrow .
 

Attachments

  • Screen Shot 2018-05-08 at 20.41.24.png
    Screen Shot 2018-05-08 at 20.41.24.png
    1.4 MB · Views: 393
Here's my imac run.

i5 2400s is 4c 4t btw, cinebench doesn't seem to know that, I'll run cinebench on my i7 930 rig when i get the time tomorrow .
added nice a mac :P
 
My mac is mostly used for web browsing now XD, i used to game with it.
 
Back
Top