• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Post your Cinebench R23 Score

Not a bad score there @Knoxx29 :) How are the temps??
 
If you mean when full loaded max temps is 51c
 
With the chiller working or just custom water was that @Knoxx29 ? :)
 
phill said:
With the chiller working or just custom water was that @Knoxx29 ? :)
Click to expand...

With the water cooled at 20c i couldn't lower it more due to the fact that the Dew Point was too high, the minimum i lower the temps is 5c above the Dew Point to avoid condensation.
 
Last edited:
It's a nice water temp to be at :) What do you normally set the chiller too when you are testing? As low as possible or just slightly lower than ambient?
 
Updated with single core performance and opengl
Capture.PNG
 
phill said:
It's a Hailea system that you use isn't it @Knoxx29 ? Do you mind me asking, what size model did you go for? :)
Click to expand...
Ppl should take pics of their builds and place it in their score posts for ppl to see esp in the future
 
Everyone seems to be running win 7 or 8 with this benchmark. Obviously a bug in that software. So how do we know the rest of the data generated from the benchmark is reliable?
 
AlwaysHope said:
Everyone seems to be running win 7 or 8 with this benchmark. Obviously a bug in that software. So how do we know the rest of the data generated from the benchmark is reliable?
Click to expand...
Everyone seems to be where they are supposed to be
 
cine1722.png



System:

FZEhdkFl.jpg
 
Last edited:
T4C Fantasy said:
Hows the maintenance on those? Can you go a year 24/7 uptime without doing anything?
Click to expand...

The only maintenance is to change the coolant every two years, well i turn it on just when need, it could run 24/7 but i wouldn't trust because if you set it to cool the water let's say at 15c and while you are not at home or you are sleeping and the Dew point is too close or above the 15c poor you, condensation all the way, just in winter time i would let it run 24/7.
 
Last edited:
Knoxx29 said:
The only maintenance is to change the coolant every two years, well i turn it on just when need, it could run 24/7 but i wouldn't trust because if you set it to cool the water let's say at 15c and while you are not home or you are sleeping the Dew point is too close or above the 15c poor you, condensation all the way, just in winter time i would let it run 24/7.
Click to expand...
That's a 300w cooler - not too bad, you must have fun overclocking with that
 
AlwaysHope said:
Everyone seems to be running win 7 or 8 with this benchmark. Obviously a bug in that software. So how do we know the rest of the data generated from the benchmark is reliable?
Click to expand...

Windows 7 is a faster OS, the benchmark runs better on that than Windows 10.. As does a lot of benchmark programs

Knoxx29 said:
View attachment 103807
Click to expand...

@Knoxx29 - Do you use a rad and fans with this at all or just the unit on it's own? I've been tempted to try one out but the condensation does put me off a little bit..

Xx Tek Tip xX said:
That's a 300w cooler - not too bad, you must have fun overclocking with that
Click to expand...

If it's like a phase unit, it'll be good fun indeed!! :)
 
phill said:
@Knoxx29 - Do you use a rad and fans with this at all or just the unit on it's own? I've been tempted to try one out but the condensation does put me off a little bit
Click to expand...

20180210_003146.jpg


20180210_003234.jpg


It uses less than 300W, if i am not mistaken around 250W, i will check later.
 
You must log in or register to reply here.
Back
Top