-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
bios 980 gtx ti flash
- Thread starter mulder69
- Start date
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 44,434 (6.78/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
You do not remove the eeprom from the gpu, you use a clip to latch onto pins
Yes, I saw that there were two possibilities.
- By desoldering
- Or with pliers leaving the eeprom on the 980 But some say that with pincers there can be difficulties.
In any case you could have advised me a programmer who does both possibilities.
thank you
- By desoldering
- Or with pliers leaving the eeprom on the 980 But some say that with pincers there can be difficulties.
In any case you could have advised me a programmer who does both possibilities.
thank you
dorsetknob
"YOUR RMA REQUEST IS CON-REFUSED"
- Joined
- Mar 17, 2005
- Messages
- 9,106 (1.23/day)
- Location
- Dorset where else eh? >>> Thats ENGLAND<<<
"How to reduce your expensive Graphic's Card and turn it into a Door-stopper"
Please note (important to read)
Please note (important to read)
Hint SPI Flasher
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 44,434 (6.78/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Hire a electronic board technician. Desoldering and resoldering is very risky. Use the clip style spi flasher.
@Sasqui can suggest 1
- Joined
- Dec 6, 2005
- Messages
- 10,882 (1.53/day)
- Location
- Manchester, NH
| System Name | Senile |
|---|---|
| Processor | I7-4790K@4.8 GHz 24/7 |
| Motherboard | MSI Z97-G45 Gaming |
| Cooling | Be Quiet Pure Rock Air |
| Memory | 16GB 4x4 G.Skill CAS9 2133 Sniper |
| Video Card(s) | GIGABYTE Vega 64 |
| Storage | Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue |
| Display(s) | 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC* |
| Case | Rosewill |
| Audio Device(s) | Onboard + HD HDMI |
| Power Supply | Corsair HX750 |
| Mouse | Logitech G5 |
| Keyboard | Corsair Strafe RGB & G610 Orion Red |
| Software | Win 10 |
Sure, drag me into this
Flashcat classic: https://www.embeddedcomputers.net/products/FlashcatUSB/
SPI chip clip for the above: https://www.embeddedcomputers.net/products/SerialAdapters/
They have instructions. You can read and write/flash to an SPI on board chip with this, with a given .rom file
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 44,434 (6.78/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Sure, drag me into this
Flashcat classic: https://www.embeddedcomputers.net/products/FlashcatUSB/
SPI chip clip for the above: https://www.embeddedcomputers.net/products/SerialAdapters/
They have instructions. You can read and write/flash to an SPI on board chip with this, with a given .rom file
The reason I suggest you is because you physically used one. I have not lol. I only help users get the bios file. Im like a Search Engine for GPUs lol
I thank you both for your help. I will try through a spi programmer to get this card.
on the photo that I put in the beginning can tell you that it is the eeprom of the bios, because I have just tried to say it but I would not try to flash with a programmer the bad
Have a good day
on the photo that I put in the beginning can tell you that it is the eeprom of the bios, because I have just tried to say it but I would not try to flash with a programmer the bad
Have a good day
Last edited: