Found This ViA Google
A user by the name of GameSprit `re:modded`the realtek drivers to enabled ALL of the stuff that realtek locked out to specific vendors
it enables stuff like the following:
Dobly DIGITAL /w THX and DTS , DTSHD ,DTS Connect
SRS Processing
CMSS-3D and EAX VIA ALchemy
XFIMB II stuff
the downside of this that there is a few Options that conflict so you may need to mess around enabling and disabling stuff
and my god it actually works
the Mans(Spanish) blog is here if you wanna check it
http://claudiogamespirit.blogspot.com/
DOWNLOAD:https://skydrive.live.com/?cid=6d9572c7052312c2#cid=6D9572C7052312C2&id=6D9572C7052312C2!218
ALT LINK for X64_Win7_WIN_Drivers: https://mega.co.nz/#!kkomFCAS!HDHDe3DmY8JtSgaWt7gYTR0kJDka3EXzIbGT2O0Ap60
ATL LINK for XFI MB II: https://mega.co.nz/#!8lYgUQgJ!EwAdklglLIeI03Zph4cZnBonVntDMDAV8Q_INfwXE84
Optionally you may also download the XFI MB II control software but its not required unless you want CMSS 3D/EAX/ALchemy (tbh installing it does Absoulutely nothing unless you use CMSS I would't as SRS is superior if you want that whole Processed and expanded sound)
Thanks for the tip. Worked in my Windows 8.1 Pro X64. However I did have to permanently disable driver signature. If anyone wants to know here's the process:
Sri2000 guide in [URL='http://www.eightforums.com/drivers-hardware/46776-permanently-disable-driver-signing-windows-8-8-1-a.html']EightForums[/URL] said:1. Open up Command Prompt as an admin.
2.Type these lines => One By One and press enter accordingly.
----> bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
----> bcdedit -set TESTSIGNING ON
3.Plz note Once Again that this will show a watermark on the bottom right corner of your screen.
I also would like to point out that SRS will not work if you setup your / have 5.1 or higher speaker mode enabled. This driver also allowed me to setup my speaker config to 5.1 with Rear Speakers. Prior to this the original realtek driver would only allow me to setup side speakers instead of rear speakers, rendering headphone's rear speakers sound-less. So BIG THANKS for this, mate!!!!!!
But perfectly works in MSI Z97 GAMING 7 motherboard with sound cinema 2, which has similar function to SRS.
Only question I have is why can't i change the Dolby or DTS setting. The only option i get is DTS connect Neo. fyi my speaker at the rear connections is Roccat kave 5.1
good luck everyone.
Last edited: