Post your Cinebench R23 Score

[Zyll Goliat]

OP @T4C Fantasy just a little correction for the table pls. my CPU actually working on 3,4Ghz(all cores) it's only turbo-boosting on 1-2 cores on 3,85Ghz

 

[Voluman]

CB23 - st 1248, mt 11339
Ryzen 7 4800H with def settings, 2x8GB @ 3200 MHz

 

[Chrispy_]

Good enough for every day use.
This one better multiscore but why?

That's more like it. 15% better.
What did you change?

 

[arabus]

Bclk 103-102
power mode standard-oc
llc5-llc1

 

[Arctucas]

24/7

 

[T4C Fantasy]

H150i AIO

24/7

View attachment 175650

need cooling

 

[Arctucas]

H150i AIO
View attachment 175651


need cooling

You or I?

Mine was done at ~27°C ambient.

Need to try with radiator in window.

 

[Nuckles56]

Higher multithreaded I would expect - The 3500U is the same base clock and core/thread count but gets the advantage of the refined 12nm process to let it squeeze more performance out of the same TDP.
Lower single-threaded from your 3500U is a little surprising, it should be boosting higher than mine and have no TDP issues on one core. CL14 RAM maybe the reason....

I'm guessing that HP probably did some tinkering with it so it doesn't boost as hard as it can as a power saving measure, plus the RAM certainly would make a difference as mine has c17 2400MHz which is pretty shite.

 

[T4C Fantasy]

You or I?

Mine was done at ~27°C ambient.

Need to try with radiator in window.

oh i mean, what do you use for cooling?

 

[Chrispy_]

H150i AIO
View attachment 175651


need cooling

LOL, it took you this long to run it yourself?

 

[Arctucas]

oh i mean, what do you use for cooling?

Custom loop, see my System Specs.

 

[Tralalak]

@phill
The webpage for Cinebench R23 on Maxon shows as system requirements worded as supported.
View attachment 175622

Windows 10
on Intel or AMD or VIA (Zhaoxin) 64-bit CPU
with SSE3 support

 

[phill]

I doubt it runs on 7 at all. The DLL is just one symptom and unlike R20, Windows 10 is a minimum system requirement of Cinema 4D R23.

I'm not going to tell you to upgrade from 7 as I'm sure you have your reasons but more and more you'll find stuff that's compiled specifically for the Windows 10 Kernel that either partially works on 7 or doesn't work at all.

@phill
The webpage for Cinebench R23 on Maxon shows as system requirements worded as supported.
View attachment 175622

Thanks both, I saw somewhere that it supported 7 but I'm guessing that was wrong.. After 3 7 reinstalls and a few drivers and whatever else I've tried to get it running, I'll just install 10 when I'd like to bench on it. After all, its only for my testing rig at the moment, just hoped to get them all tested and tried under the same OS.... I suppose the R23 is a Win 10 version of R20 with some tweaks so... not to worry

 

[Voluman]

CB23 - st 1248, mt 11339
Ryzen 7 4800H with def settings, 2x8GB @ 3200 MHz

If anyone interested, checked with coretemp, single was 4290MHz and multi was 4165-3791 Mhz. Start with the higher and ended with the lower ones.

 

[T4C Fantasy]

GPU Database discord

Join the TPU GPU Database Discord Server!

Check out the TPU GPU Database community on Discord - hang out with 156 other members and enjoy free voice and text chat.

discord.gg

 

[Athlonite]

All info is in the attached photo plus additional info below:
Ambient Temp: 81F
Stock Cooler
View attachment 175462

Shoot I find that hard to believe on a stock cooler and at 3.5GHz something hookey going there

 

[Canadianese]

Lian Li Galahad 360MM AIO
Core Clock @ 4300MHz
Edit: 35-40*c Idle @ Ambient 24-26*c
40-55*c Underload @ Ambient 24-26*c

Most of the time it's at 40*c when I'm streaming and doing other things.

 

[Athlonite]

Athlonite muti 13314 single 1288 4.327GHz Air Cryorig R1 Universal

-All core 4225MHz @ 1.476V

You should be able to drop that voltage down to 1.250V I managed 4.327 @1.250v try CTR and see what you end up with for an all core MHz/V

 

[Anarchy0110]

Here we go, bad multi-core score because of how the new BIOS revision treats Turbo Boost and stuff.
Might be a bad battery too, I'll see if I can replace it with a new one and re-run in the future.

 

[DemonicRyzen666]

@ T4C fantasy I think you missed me
I reuploaded this it's at idle with cool & quiet on.

idle clock is 800 mhz
turbo clock is 3.1ghz
all core clock load is 2.6ghz
Phenom II 1035T
DDR3 1600mhz

it's really sad to know that a phenom II 1090T and HD 5870 are now basically equal to an overclocked Athlon 3000G with an overclocked IGP lol
sometime this week I'll have to run this on the sempron 140 and see if it takes 6 hours to run lol

 

[lazord00d]

All on OEM Wraith air cooler.

BIOS manual OC locked at 4.1GHz@1.220V

 

[Chrispy_]

it's really sad to know that a phenom II 1090T and HD 5870 are now basically equal to an overclocked Athlon 3000G with an overclocked IGP lol
sometime this week I'll have to run this on the sempron 140 and see if it takes 6 hours to run lol

Tried to run R23 on an Atom Z3735F the other day, Lost patience and shut it down again

 

[Nuckles56]

Athlonite muti 13314 single 1288 4.327GHz Air Cryorig R1 Universal

View attachment 175723



You should be able to drop that voltage down to 1.250V I managed 4.327 @1.250v try CTR and see what you end up with for an all core MHz/V

Maybe, but my attempts previously to run at lower voltage have sadly just crashed when I've tried myself, I managed 4.0 @1.29 but that was a net no change performance wise vs running stock. I didn't do well in the silicon lottery, and early production silicon as well to boot.

@T4C Fantasy you missed my other score, the HP Envy x360 score with 3500u

 

[Arctucas]

Overclocked to 5300MHz. Same hardware as previous.

 

[Devon68]

Here are my Cinebench R23 scores
This is my desktop running an FX 6100 at stock 3.3 GHz with 3.6 GHz Turbo (Mostly stays at 3.3 GHz while rendering). Air Cooled.

and this is my HP Laptop running an i7 7700HQ at stock (Seems to be running from 3 up to 3.6 Ghz, but mostly stays around 3.4 Ghz). Also air cooled.