AMD users how high can you get your HT speed

[kwchang007]

@pos: Holy SHIT that's alot of difference. Oh ram...hmm now idk...if you get the chance you should try playing with ram dividers and just run the HTT at that divider to keep the ram stock. But that's still a good comparison. I'm surprised my laptop can beat your system when yours is at 2.5 ghz.

@hat: overclocking csi: Probably going to be like overclocking HTT

@erocker: i don't think so...I think that it's just it wasn't ready and they wanted a cpu that could work with LGA 775 since they had Bad Axe ready to go.

 

[p_o_s_pc]

@pos: Holy SHIT that's alot of difference. Oh ram...hmm now idk...if you get the chance you should try playing with ram dividers and just run the HTT at that divider to keep the ram stock. But that's still a good comparison. I'm surprised my laptop can beat your system when yours is at 2.5 ghz.

@hat: overclocking csi: Probably going to be like overclocking HTT

@erocker: i don't think so...I think that it's just it wasn't ready and they wanted a cpu that could work with LGA 775 since they had Bad Axe ready to go.

What does your laptop get also what is CPU and ram? Keep in mind i am running my ram way underclocked so i know it won't hold me back.

 

[kwchang007]

What does your laptop get also what is CPU and ram? Keep in mind i am running my ram way underclocked so i know it won't hold me back.

27 sec flat was my best. It's in the super pi 1 million database somewhere. 2.0 ghz c2d on a 667 mhz fsb with 4mb of cache. 553 mhz ram at 4-4-4-12 I think. So my ram is pretty bad as far as ram goes.

 

[WarEagleAU]

mines at 9 mutli 990 htt and running at 2.8 ghz with 4x <G>

 

[p_o_s_pc]

27 sec flat was my best. It's in the super pi 1 million database somewhere. 2.0 ghz c2d on a 667 mhz fsb with 4mb of cache. 553 mhz ram at 4-4-4-12 I think. So my ram is pretty bad as far as ram goes.

damn i can't get better than 31s +/- with my ram at 1000mhz 4-4-4-12 and CPU at 2.8ghz. maybe i need to get a better CPU but i think i will wait till i get water cooling.

 

[p_o_s_pc]

mines at 9 mutli 990 htt and running at 2.8 ghz with 4x <G>

I think you could run it higher if you wanted but that is a good speed.not overclocked and not too much of an underclock.

 

[Solaris17]

my ht link is currently at 1243 and totally stable

 

[p_o_s_pc]

I went for 1600 and it was fine than i set it to 1610 and BSOD. 1550 is stable for me.

 

[Solaris17]

i could try to get it higher i suppose but i just tore my hair out trying to get 3ghz this last week so i kinda want to enjoy it for a bit i can get it at 3 with htt at 950 but i upped the divider to 4x because i Ov my NB and you know i may not see a diff but more mhz any ware must mean more preformance someware so w/e

 

[cdawall]

thats with a s754 on a POS mobo that does absulutly nothing as far as bus locks go

here is furthur proof
http://valid.x86-secret.com/show_oc?id=178119

thats 1036 up form 800mhz stock not bad for any s754


oh adn as far as volts go chipset was @ 2.7v i tihnk (2.5v stock) ram 1:1 @259mhz 3-6-6-12 just so the thing had no issues i re-ran @3-4-4-8 just didnt SS it @2.85v for ram, cpu @ 1.8v REAL (1.475+20% which equals 1.77v but the mobo has a slight bump real comes out to 1.81v on voltmeter)

 

[p_o_s_pc]

that isn't bad. i only could get 1200mhz on my Sempron 3200+ (AM2) or as you called it before the super clocked sempron.

 

[Jess Stingray]

Mine's currently at 1250.

 

[p_o_s_pc]

here is a hint... lower your ram speed when trying for a high HT. I set mine at 400mhz@3-3-3-8@2t to get my HT that high than after i did i set the ram to 533@4-4-4-10 and that makes it close to stock speed.

 

[xnox202]

yesterday i tried 260x10, then i forgot to change my htt to x3. it was set to x4 and it didn't booted. that is with a dfi lanparty ultra-d (1.8v)

:feels sad:

 

[curt]

i havenmt rilly played with ocing that all that much i dident notis it change much for speed eather cus i tryed once benching at 1000ht an then 600 an i got pritty much the same marks

single core cpu i tested that on hit around 1150 the one time i did try an push the htt

will be posting opteron 180 results soon

 

[mitsirfishi]

think the max ive had is 1500htt but ill test it later still sorting a few things to go against pos pc's 7900gs

but what are peoples motherboards topping out at my asus m2r32 mvp has done 365fsb max

 

[mitsirfishi]

there and here is the after results when trying 1600

 

[cdawall]

good shot you do kno that sys specs you spelled arctic freezer wrong correct?

 

[mandelore]

think the max ive had is 1500htt but ill test it later still sorting a few things to go against pos pc's 7900gs

but what are peoples motherboards topping out at my asus m2r32 mvp has done 365fsb max

Ive had my Asus A8R32-MVP deluxe up to 385FSB, had to slacken the ram a fair bit tho

 

[cdawall]

my K8M8MS has done 259fsb max though i have seen it do much higher on the later Am2 version of this chipset (same southbridge)

 

[erocker]

This is what I run stock (non gaming apps):

This is what I used to run for gaming:

This is my new gaming setup with higher HTT!:

 

[erocker]

Here is my Super PI score which corresponds to the 3rd pic above:

 

[p_o_s_pc]

anyone else

 

[p_o_s_pc]

there and here is the after results when trying 1600

damn it you got higher than me.

 

[mitsirfishi]

damn it you got higher than me.

well i tried my best and wacked 1.5v through my northbridge and 1. something through my southbridge i was surprised how far it goes after 1550htt it starts to get abit laggy and jurky in windows but its the maximum frequency what counts