Ryzen Owners Zen Garden

[R-T-B]

I never understood why booting from the main partition wasn't good enough

It's fine if you don't mind booting from a FAT16/32 partition, since that is all UEFI can understand in boot terms.

i use ADK, ISO from MS site, tpm and secure boot are disabled...
... it does something to BIOS when it boots since clearcmos made PC work again !!
//
I can :
1 - save my settings to text
2 - boot win 11, wait BSOD
3 - save settings to text
4 - compare BIOS settings
//
Yes... no setting changed, but no BSOD under Win10 anymore after clearcmos.. and BSOD again since Win11 launched !!
I have Memory Power Down disabled, and High Memory Voltage (aka) too, only settings i touched about RAM... or is it secure boot and tpm thingies that mess the two O/S !?
Since default settings from BIOS Win 11 doesnt' BSOD ...

Spoiler: BIOSettings

Ai Overclock Tuner [Auto]
Memory Frequency [Auto]
FCLK Frequency [Auto]
Core Performance Boost [Disabled]
Tcl [Auto]
Trcd [Auto]
Trp [Auto]
Tras [Auto]
Trc [Auto]
Twr [Auto]
Refresh Interval [Auto]
Trfc1 [Auto]
Trfc2 [Auto]
Trfcsb [Auto]
Trtp [Auto]
TrrdL [Auto]
TrrdS [Auto]
Tfaw [Auto]
TwtrL [Auto]
TwtrS [Auto]
TrdrdScl [Auto]
TrdrdSc [Auto]
TrdrdSd [Auto]
Trdrddd [Auto]
TwrwrScl [Auto]
TwrwrSc [Auto]
TwrwrSd [Auto]
TwrwrDd [Auto]
Twrrd [Auto]
Trdwr [Auto]
IBUF_LPWR_MODE [Auto]
ADDR_CMD_MODE [Auto]
M_ORDERING [Auto]
S_COL_WIDTH [Auto]
MC_SVA_TRIM0 [Auto]
MC_SVA_TRIM1 [Auto]
MC_SVA_TRIM2 [Auto]
Proc CA Drive Strength [Auto]
Proc Data Drive Strength [Auto]
CPU On-Die Termination [Auto]
DRAM Data Drive Strength [Auto]
Rtt Nom Wr [Auto]
Rtt Nom Rd [Auto]
Rtt Wr [Auto]
Rtt Park [Auto]
Rtt Park Dqs [Auto]
Power Down Enable [Disabled]
Memory Context Restore [Auto]
UCLK DIV1 MODE [Auto]
Bank Swap Mode [Auto]
Mem Over Clock Fail Count [Auto]
Medium Load Boostit [Auto]
Precision Boost Overdrive [Auto]
Precision Boost Overdrive Scalar [Auto]
CPU Boost Clock Override [Auto]
Per-Core Boost Clock Limit [Auto]
Platform Thermal Throttle Limit [Auto]
Curve Optimizer [Auto]
GFX Curve Optimizer [Auto]
VRM Initialization Check [Enabled]
CPU Load-line Calibration [Auto]
CPU Current Capability [Auto]
CPU VRM Switching Frequency [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
VDDSOC Load-line Calibration [Auto]
VDDSOC Current Capability [Auto]
VDDSOC Switching Frequency [Auto]
VDDSOC Power Duty Control [T.Probe]
VDDSOC Power Phase Control [Auto]
Performance Bias [Auto]
Clock Spread Spectrum [Auto]
1.8V PLL Voltage [Auto]
1.8V Standby Voltage [Auto]
Misc_ALW [Auto]
Chipset 1.05V [Auto]
Algorithm 1 [Auto]
Algorithm 2 [Auto]
Algorithm 3 [Auto]
CCD Priority Memory Activity Threshold [1070]
CCD Priority Hysteresis [Auto]
Cooler Efficiency Customize [Keep Training]
Cooler Re-evaluation Algorithm [Normal]
Optimism Scale [100]
CPU SOC Voltage [Auto]
CPU VDDIO / MC Voltage [Auto]
Misc Voltage [Auto]
VDDP Voltage [Auto]
High DRAM Voltage Mode [Disabled]
DRAM VDD Voltage [Auto]
DRAM VDDQ Voltage [Auto]
PMIC Force Continuous Current Mode [Auto]
PMIC Voltages [Auto]
Interrupteur fTPM (Firmware TPM) [Firmware TPM (fTPM) désactivé]
Effacer fTPM NV pour un retour aux paramètres d'usine [Désactivé]
Password protection of Runtime Variables [Disable]
Prise en charge de PSS [Activé]
Mode NX [Désactivé]
Mode SVM [Désactivé]
Adressage supérieur à 4Go [Activé]
Prise en charge de Resize BAR [Activé]
Prise en charge SR-IOV [Désactivé]
Support USB hérité [Désactivé]
XHCI Hand-off [Désactivé]
Support des pilotes de stockage de masse USB [Activé]
U32G2_C2 [Activé]
U32G2_3 [Activé]
U32G2_E1 [Activé]
U32G2_E2 [Activé]
U32G2_E3 [Activé]
U32G2_E4 [Activé]
USB5 [Désactivé]
U32G2X2_C6 [Activé]
U32G2_C10 [Activé]
U32G1_8 [Désactivé]
U32G1_9 [Activé]
U32G2_11 [Activé]
USB15 [Activé]
USB16 [Activé]
USB17 [Activé]
Pile réseau [Désactivé]
Appareil [CT2000MX500SSD1]
Mode RAID NVMe [Désactivé]
Vérification de l'état S.M.A.R.T [Désactivé]
Récupération après coupure d'alimentation [Eteindre]
ErP Ready [Désactivé]
Économie d'énergie maximale [Désactivé]
Démarrage système par périphérique PCI-E [Désactivé]
Démarrage système par évènement RTC [Désactivé]
Contrôle du mode ASPM PCIE du processeur [Auto]
Configuration de la bifurcation de bande passante sur PCIEX16_1 [Mode X16 PCIE]
Contrôleur USB Audio [Activé]
Contrôleur Wi-Fi [Désactivé]
Contrôleur Bluetooth [Activé]
Lorsque le système est en fonctionnement [Aura désactivé]
Q-Code LED Function (Fonction LED Q-Code) [Auto]
Contrôleur réseau Intel [Désactivé]
Alimentation du port USB en état d'arrêt piloté (S5) [Désactivé]
Contrôleur de stockage ASMedia [Active]
Notification de branchement à chaud Windows [Désactivé]
Support ASPM [Désactivé]
Mode de lien sur PCIEX16_1 [GEN 4]
Mode de lien sur PCIEX16_2 [Auto]
Mode de lien sur M.2_3 [Auto]
Mode de lien sur M.2_1 [GEN 4]
Mode de lien sur Chipset [Auto]
Mode de lien sur M.2_2 [GEN 4]
Mode de lien sur PCIEX16_3 [Auto]
Mode de lien sur M.2_4 [GEN 3]
Périphérique vidéo principal [Périphérique vidéo sur PCIE]
Unité graphique intégrée [Désactivé]
Global C-state Control [Auto]
IOMMU [Disabled]
ECC [Disabled]
SMT Control [Auto]
Core Performance Boost [Disabled]
L1 Stream HW Prefetcher [Auto]
L2 Stream HW Prefetcher [Auto]
L1 Stride Prefetcher [Auto]
L1 Region Prefetcher [Auto]
L2 Up/Down Prefetcher [Auto]
Core Watchdog Timer Enable [Disabled]
Platform First Error Handling [Auto]
Opcache Control [Auto]
Streaming Stores Control [Auto]
Local APIC Mode [Auto]
ACPI _CST C1 Declaration [Auto]
MCA error thresh enable [Auto]
SMU and PSP Debug Mode [Auto]
PPIN Opt-in [Auto]
Enhanced REP MOVSB/STOSB [Enabled]
REP-MOV/STOS Streaming [Enabled]
Xtrig7 Workaround [Auto]
SNP Memory (RMP Table) Coverage [Auto]
SMEE [Disable]
Action on BIST Failure [Auto]
PAUSE Delay [Auto]
Power Supply Idle Control [Auto]
Memory interleaving [Auto]
Memory interleaving size [Auto]
DRAM map inversion [Auto]
Location of private memory regions [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
Disable DF to external downstream IP Sync Flood Propagation [Auto]
Disable DF sync flood propagation [Auto]
Freeze DF module queues on error [Auto]
DF Cstates [Auto]
PSP error injection support [False]
Active Memory Timing Settings [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor CS drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Processor ODT impedance [Auto]
Processor DQ drive strengths [Auto]
Dram DQ drive strengths [Auto]
Power Down Enable [Disabled]
Disable Memory Error Injection [Auto]
TSME [Disabled]
Data Scramble [Disabled]
Chipselect Interleaving [Auto]
Address Hash Bank [Auto]
Address Hash CS [Auto]
Address Hash Subchannel [Auto]
BankSwapMode [Auto]
DFE Read Training [Auto]
DRAM PDA Enumerate ID Programming Mode [Auto]
TX DFE Taps [Auto]
PPT Control [Auto]
MBIST Enable [Auto]
Memory Context Restore [Auto]
OC Recovery Fail Count [1]
PCIe ARI Support [Auto]
PCIe All Port ECRC [Auto]
Advanced Error Reporting (AER) [Auto]
PCIe ARI Enumeration [Auto]
PSPP Policy [Auto]
UMA Version [Auto]
GPU Host Translation Cache [Auto]
NB Azalia [Auto]
Audio IOs [Auto]
PCIe loopback Mode [Auto]
Persistence mode for legacy endpoints [Auto]
Retimer margining support [Auto]
CPPC Dynamic Preferred Cores [Auto]
ECO Mode [Disable]
TDP Control [Auto]
PPT Control [Auto]
Thermal Control [Auto]
TDC Control [Auto]
EDC Control [Auto]
PROCHOT Control [Auto]
Fan Control [Auto]
VDDP Voltage Control [Auto]
Infinity Fabric Frequency and Dividers [Auto]
FEATURE FCLK DPM [Auto]
SyncFifo Mode Override [Auto]
GFXOFF [Enable]
Température du processeur [Surveillance]
Température globale du CPU [Surveillance]
Température de la carte mère [Surveillance]
Température du régulateur de tension [Surveillance]
Température du chipset [Surveillance]
Température T_Sensor [Ignorer]
Température DIMM A1 [Ignorer]
Température DIMM A2 [Surveillance]
Température DIMM B1 [Ignorer]
Température DIMM B2 [Surveillance]
Vitesse du ventilateur du processeur [Surveillance]
Vitesse du ventilateur optionnel du processeur [Ignorer]
Vitesse du ventilateur du châssis 1 [Ignorer]
Vitesse du ventilateur du châssis 2 [Ignorer]
Vitesse du ventilateur du châssis 3 [Surveillance]
Vitesse du ventilateur du châssis 4 [Surveillance]
Vitesse du ventilateur du châssis 5 [Surveillance]
Vitesse de la pompe AIO [Ignorer]
Tension du cœur du processeur [Surveillance]
Voltage 12V [Surveillance]
Voltage 5V [Surveillance]
Voltage 3.3V [Surveillance]
CPU VDDIO / MC Voltage [Surveillance]
Contrôle Q-Fan du ventilateur du processeur [Mode PWM]
Profil de ventilation du processeur [Turbo]
Palier d'accélération du ventilateur du processeur [Niveau 0]
Palier de décélération du ventilateur du processeur [Niveau 1]
Seuil de vitesse minimale de ventilateur du processeur [200 rpm]
Contrôle Q-Fan du châssis 1 [Détection automatique]
Profil de ventilation de châssis 1 [Standard]
Source Q-Fan du ventilateur du châssis 1 [Processeur]
Augmentation de la vitesse du ventilateur de châssis 1 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 1 [Niveau 0]
Vitesse minimale de ventilateur du châssis 1 [200 rpm]
Contrôle Q-Fan du châssis 2 [Détection automatique]
Profil de ventilation de châssis 2 [Standard]
Source Q-Fan du ventilateur du châssis 2 [Processeur]
Augmentation de la vitesse du ventilateur de châssis 2 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 2 [Niveau 0]
Vitesse minimale de ventilateur du châssis 2 [200 rpm]
Contrôle Q-Fan du châssis 3 [Mode PWM]
Profil de ventilation de châssis 3 [Standard]
Source Q-Fan du ventilateur du châssis 3 [Sources multiples]
Température source 1 [Processeur]
Température source 2 [Carte mère]
Température source 3 [VRM]
Augmentation de la vitesse du ventilateur de châssis 3 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 3 [Niveau 0]
Vitesse minimale de ventilateur du châssis 3 [200 rpm]
Contrôle Q-Fan du châssis 4 [Mode PWM]
Profil de ventilation de châssis 4 [Standard]
Source Q-Fan du ventilateur du châssis 4 [Sources multiples]
Température source 1 [Processeur]
Température source 2 [Carte mère]
Température source 3 [VRM]
Augmentation de la vitesse du ventilateur de châssis 4 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 4 [Niveau 0]
Vitesse minimale de ventilateur du châssis 4 [200 rpm]
Contrôle Q-Fan du châssis 5 [Mode PWM]
Profil de ventilation de châssis 5 [Standard]
Source Q-Fan du ventilateur du châssis 5 [Sources multiples]
Température source 1 [Processeur]
Température source 2 [Carte mère]
Température source 3 [VRM]
Augmentation de la vitesse du ventilateur de châssis 5 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 5 [Niveau 0]
Vitesse minimale de ventilateur du châssis 5 [200 rpm]
Contrôle de la pompe AIO [Détection automatique]
Profil de la pompe AIO [Pleine vitesse]
Support de détection d'intrusion châssis [Désactivé]
Exécution CSM [Désactivé]
Type de système d'exploitation [Autre SE]
Mode de démarrage sécurisé [Personnalisé]
Démarrage rapide [Activé]
Démarrage après une panne de courant [Démarrage normal]
Logo de démarrage [Auto]
POST delay time [3 sec]
État du verrou numérique [Activé]
Attendre la pression de F1 en cas d'erreur [Activé]
Messages Option ROM [Forcer le mode BIOS]
Capture d'interruption 19 [Désactivé]
Prise en charge du pilote NVMe natif AMI [Activé]
Mode de configuration [Mode avancé]
Downgrade du BIOS [Désactivé]
Publier les ressources HII [Désactivé]
Flexkey [DirectKey]
Restaurer à partir du Profil [1]
Nom du profil : [TouJour]
Enregistrer sur un Profil [1]
Slot DIMM # [Slot A2]
Télécharger et installer l'application ARMOURY CRATE [Désactivé]
Télécharger et installer le service et l'application MyASUS [Désactivé]
Special Display Features [Disabled]
D3Cold Support [Disabled]
Discrete GPU _DSM Function A [Disabled]
Discrete GPU _DSM Function B [Disabled]
NVIDIA DGPU Power Enable [Disabled]
Non-Eval Discrete GPU Support [Enabled]
Discrete GPU HPD Circuitry [OR Circuitry]
Discrete GPU's USB Port [Disabled]
Discrete GPU's SSID/SVID [Keep Default Setting]
Discrete GPU BOMACO Support [Disabled]
Thunderbolt / USB4 Support [Disabled]
Processor Aggregator Device [Enabled]
Core Count Control [Enabled]
SMT Control [Auto]
Active Memory Timing Settings [Auto]
Processor CA drive strengths [Auto]
Processor DQ drive strengths [Auto]
Processor ODT impedance [Auto]
Dram DQ drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Power Down Enable [Auto]
Infinity Fabric Frequency and Dividers [Auto]
UCLK DIV1 MODE [Auto]
Precision Boost Overdrive [Auto]
VDDG Voltage Control [Auto]
VDDP Voltage Control [Auto]
SoC/Uncore OC Mode [Auto]
SoC Voltage [0]
VDD Misc Control [Auto]
LCLK Frequency Control [Auto]
VDDIO Ctrl [Auto]
Enable Platform PMIC Control [Auto]
VPP Ctrl [Auto]

Spoiler: Working BIOSettings :

[2023/05/20 17:18:55]
Ai Overclock Tuner [Auto]
Memory Frequency [Auto]
FCLK Frequency [Auto]
Core Performance Boost [Disabled]
Tcl [Auto]
Trcd [Auto]
Trp [Auto]
Tras [Auto]
Trc [Auto]
Twr [Auto]
Refresh Interval [Auto]
Trfc1 [Auto]
Trfc2 [Auto]
Trfcsb [Auto]
Trtp [Auto]
TrrdL [Auto]
TrrdS [Auto]
Tfaw [Auto]
TwtrL [Auto]
TwtrS [Auto]
TrdrdScl [Auto]
TrdrdSc [Auto]
TrdrdSd [Auto]
Trdrddd [Auto]
TwrwrScl [Auto]
TwrwrSc [Auto]
TwrwrSd [Auto]
TwrwrDd [Auto]
Twrrd [Auto]
Trdwr [Auto]
IBUF_LPWR_MODE [Auto]
ADDR_CMD_MODE [Auto]
M_ORDERING [Auto]
S_COL_WIDTH [Auto]
MC_SVA_TRIM0 [Auto]
MC_SVA_TRIM1 [Auto]
MC_SVA_TRIM2 [Auto]
Proc CA Drive Strength [Auto]
Proc Data Drive Strength [Auto]
CPU On-Die Termination [Auto]
DRAM Data Drive Strength [Auto]
Rtt Nom Wr [Auto]
Rtt Nom Rd [Auto]
Rtt Wr [Auto]
Rtt Park [Auto]
Rtt Park Dqs [Auto]
Power Down Enable [Auto]
Memory Context Restore [Auto]
UCLK DIV1 MODE [Auto]
Bank Swap Mode [Auto]
Mem Over Clock Fail Count [Auto]
Medium Load Boostit [Auto]
Precision Boost Overdrive [Auto]
Precision Boost Overdrive Scalar [Auto]
CPU Boost Clock Override [Auto]
Per-Core Boost Clock Limit [Auto]
Platform Thermal Throttle Limit [Auto]
Curve Optimizer [Auto]
GFX Curve Optimizer [Auto]
VRM Initialization Check [Enabled]
CPU Load-line Calibration [Auto]
CPU Current Capability [Auto]
CPU VRM Switching Frequency [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
VDDSOC Load-line Calibration [Auto]
VDDSOC Current Capability [Auto]
VDDSOC Switching Frequency [Auto]
VDDSOC Power Duty Control [T.Probe]
VDDSOC Power Phase Control [Auto]
Performance Bias [Auto]
Clock Spread Spectrum [Auto]
1.8V PLL Voltage [Auto]
1.8V Standby Voltage [Auto]
Misc_ALW [Auto]
Chipset 1.05V [Auto]
Algorithm 1 [Auto]
Algorithm 2 [Auto]
Algorithm 3 [Auto]
CCD Priority Memory Activity Threshold [1070]
CCD Priority Hysteresis [Auto]
Cooler Efficiency Customize [Keep Training]
Cooler Re-evaluation Algorithm [Normal]
Optimism Scale [100]
CPU SOC Voltage [Auto]
CPU VDDIO / MC Voltage [Auto]
Misc Voltage [Auto]
VDDP Voltage [Auto]
High DRAM Voltage Mode [Disabled]
DRAM VDD Voltage [Auto]
DRAM VDDQ Voltage [Auto]
PMIC Force Continuous Current Mode [Auto]
PMIC Voltages [Auto]
Prise en charge des dispositifs de sécurité [Désactivé]
Désactiver le blocage du SID [Désactivé]
Interrupteur fTPM (Firmware TPM) [Activer fTPM sur PSP]
Effacer fTPM NV pour un retour aux paramètres d'usine [Activé]
Password protection of Runtime Variables [Disable]
Prise en charge de PSS [Activé]
Mode NX [Désactivé]
Mode SVM [Désactivé]
Adressage supérieur à 4Go [Activé]
Prise en charge de Resize BAR [Activé]
Prise en charge SR-IOV [Désactivé]
Support USB hérité [Désactivé]
XHCI Hand-off [Désactivé]
Support des pilotes de stockage de masse USB [Activé]
U32G2_C2 [Activé]
U32G2_3 [Activé]
U32G2_E1 [Activé]
U32G2_E2 [Activé]
U32G2_E3 [Activé]
U32G2_E4 [Activé]
USB5 [Désactivé]
U32G2X2_C6 [Activé]
U32G2_C10 [Activé]
U32G1_8 [Désactivé]
U32G1_9 [Activé]
U32G2_11 [Activé]
USB15 [Activé]
USB16 [Activé]
USB17 [Activé]
Pile réseau [Désactivé]
Appareil [CT2000MX500SSD1]
Mode RAID NVMe [Désactivé]
Vérification de l'état S.M.A.R.T [Désactivé]
Récupération après coupure d'alimentation [Eteindre]
ErP Ready [Désactivé]
Économie d'énergie maximale [Désactivé]
Démarrage système par périphérique PCI-E [Désactivé]
Démarrage système par évènement RTC [Désactivé]
Contrôle du mode ASPM PCIE du processeur [Auto]
Configuration de la bifurcation de bande passante sur PCIEX16_1 [Mode X16 PCIE]
Contrôleur USB Audio [Activé]
Contrôleur Wi-Fi [Désactivé]
Contrôleur Bluetooth [Activé]
Lorsque le système est en fonctionnement [Aura désactivé]
Q-Code LED Function (Fonction LED Q-Code) [Auto]
Contrôleur réseau Intel [Désactivé]
Alimentation du port USB en état d'arrêt piloté (S5) [Désactivé]
Contrôleur de stockage ASMedia [Active]
Notification de branchement à chaud Windows [Désactivé]
Support ASPM [Désactivé]
Mode de lien sur PCIEX16_1 [GEN 4]
Mode de lien sur PCIEX16_2 [Auto]
Mode de lien sur M.2_3 [Auto]
Mode de lien sur M.2_1 [GEN 4]
Mode de lien sur Chipset [Auto]
Mode de lien sur M.2_2 [GEN 4]
Mode de lien sur PCIEX16_3 [Auto]
Mode de lien sur M.2_4 [GEN 3]
Périphérique vidéo principal [Périphérique vidéo sur PCIE]
Unité graphique intégrée [Désactivé]
Global C-state Control [Auto]
IOMMU [Disabled]
ECC [Auto]
SMT Control [Auto]
Core Performance Boost [Disabled]
L1 Stream HW Prefetcher [Auto]
L2 Stream HW Prefetcher [Auto]
L1 Stride Prefetcher [Auto]
L1 Region Prefetcher [Auto]
L2 Up/Down Prefetcher [Auto]
Core Watchdog Timer Enable [Disabled]
Platform First Error Handling [Auto]
Opcache Control [Auto]
Streaming Stores Control [Auto]
Local APIC Mode [Auto]
ACPI _CST C1 Declaration [Auto]
MCA error thresh enable [Auto]
SMU and PSP Debug Mode [Auto]
PPIN Opt-in [Auto]
Enhanced REP MOVSB/STOSB [Enabled]
REP-MOV/STOS Streaming [Enabled]
Xtrig7 Workaround [Auto]
SNP Memory (RMP Table) Coverage [Auto]
SMEE [Auto]
Action on BIST Failure [Auto]
PAUSE Delay [Auto]
Power Supply Idle Control [Auto]
Memory interleaving [Auto]
Memory interleaving size [Auto]
DRAM map inversion [Auto]
Location of private memory regions [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
Disable DF to external downstream IP Sync Flood Propagation [Auto]
Disable DF sync flood propagation [Auto]
Freeze DF module queues on error [Auto]
DF Cstates [Auto]
PSP error injection support [False]
Active Memory Timing Settings [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor CS drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Processor ODT impedance [Auto]
Processor DQ drive strengths [Auto]
Dram DQ drive strengths [Auto]
Power Down Enable [Auto]
Disable Memory Error Injection [Auto]
TSME [Auto]
Data Scramble [Auto]
Chipselect Interleaving [Auto]
Address Hash Bank [Auto]
Address Hash CS [Auto]
Address Hash Subchannel [Auto]
BankSwapMode [Auto]
DFE Read Training [Auto]
DRAM PDA Enumerate ID Programming Mode [Auto]
TX DFE Taps [Auto]
PPT Control [Auto]
MBIST Enable [Auto]
Memory Context Restore [Auto]
OC Recovery Fail Count [1]
PCIe ARI Support [Auto]
PCIe All Port ECRC [Auto]
Advanced Error Reporting (AER) [Auto]
PCIe ARI Enumeration [Auto]
PSPP Policy [Auto]
UMA Version [Auto]
GPU Host Translation Cache [Auto]
NB Azalia [Auto]
Audio IOs [Auto]
PCIe loopback Mode [Auto]
Persistence mode for legacy endpoints [Auto]
Retimer margining support [Auto]
CPPC Dynamic Preferred Cores [Auto]
ECO Mode [Disable]
TDP Control [Auto]
PPT Control [Auto]
Thermal Control [Auto]
TDC Control [Auto]
EDC Control [Auto]
PROCHOT Control [Auto]
Fan Control [Auto]
VDDP Voltage Control [Auto]
Infinity Fabric Frequency and Dividers [Auto]
FEATURE FCLK DPM [Auto]
SyncFifo Mode Override [Auto]
GFXOFF [Enable]
Température du processeur [Surveillance]
Température globale du CPU [Surveillance]
Température de la carte mère [Surveillance]
Température du régulateur de tension [Surveillance]
Température du chipset [Surveillance]
Température T_Sensor [Ignorer]
Température DIMM A1 [Ignorer]
Température DIMM A2 [Surveillance]
Température DIMM B1 [Ignorer]
Température DIMM B2 [Surveillance]
Vitesse du ventilateur du processeur [Surveillance]
Vitesse du ventilateur optionnel du processeur [Ignorer]
Vitesse du ventilateur du châssis 1 [Ignorer]
Vitesse du ventilateur du châssis 2 [Ignorer]
Vitesse du ventilateur du châssis 3 [Surveillance]
Vitesse du ventilateur du châssis 4 [Surveillance]
Vitesse du ventilateur du châssis 5 [Surveillance]
Vitesse de la pompe AIO [Ignorer]
Tension du cœur du processeur [Surveillance]
Voltage 12V [Surveillance]
Voltage 5V [Surveillance]
Voltage 3.3V [Surveillance]
CPU VDDIO / MC Voltage [Surveillance]
Contrôle Q-Fan du ventilateur du processeur [Mode PWM]
Profil de ventilation du processeur [Standard]
Palier d'accélération du ventilateur du processeur [Niveau 0]
Palier de décélération du ventilateur du processeur [Niveau 0]
Seuil de vitesse minimale de ventilateur du processeur [200 rpm]
Contrôle Q-Fan du châssis 1 [Détection automatique]
Profil de ventilation de châssis 1 [Standard]
Source Q-Fan du ventilateur du châssis 1 [Processeur]
Augmentation de la vitesse du ventilateur de châssis 1 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 1 [Niveau 0]
Vitesse minimale de ventilateur du châssis 1 [200 rpm]
Contrôle Q-Fan du châssis 2 [Détection automatique]
Profil de ventilation de châssis 2 [Standard]
Source Q-Fan du ventilateur du châssis 2 [Processeur]
Augmentation de la vitesse du ventilateur de châssis 2 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 2 [Niveau 0]
Vitesse minimale de ventilateur du châssis 2 [200 rpm]
Contrôle Q-Fan du châssis 3 [Mode PWM]
Profil de ventilation de châssis 3 [Standard]
Source Q-Fan du ventilateur du châssis 3 [Sources multiples]
Température source 1 [Processeur]
Température source 2 [Carte mère]
Température source 3 [VRM]
Augmentation de la vitesse du ventilateur de châssis 3 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 3 [Niveau 0]
Vitesse minimale de ventilateur du châssis 3 [200 rpm]
Contrôle Q-Fan du châssis 4 [Détection automatique]
Profil de ventilation de châssis 4 [Standard]
Source Q-Fan du ventilateur du châssis 4 [Sources multiples]
Température source 1 [Processeur]
Température source 2 [Carte mère]
Température source 3 [VRM]
Augmentation de la vitesse du ventilateur de châssis 4 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 4 [Niveau 0]
Vitesse minimale de ventilateur du châssis 4 [200 rpm]
Contrôle Q-Fan du châssis 5 [Mode PWM]
Profil de ventilation de châssis 5 [Standard]
Source Q-Fan du ventilateur du châssis 5 [Sources multiples]
Température source 1 [Processeur]
Température source 2 [Carte mère]
Température source 3 [VRM]
Augmentation de la vitesse du ventilateur de châssis 5 [Niveau 0]
Diminution de la vitesse du ventilateur de châssis 5 [Niveau 0]
Vitesse minimale de ventilateur du châssis 5 [200 rpm]
Contrôle de la pompe AIO [Détection automatique]
Profil de la pompe AIO [Pleine vitesse]
Support de détection d'intrusion châssis [Désactivé]
Exécution CSM [Désactivé]
Type de système d'exploitation [Autre SE]
Mode de démarrage sécurisé [Personnalisé]
Démarrage rapide [Activé]
Démarrage après une panne de courant [Démarrage normal]
Logo de démarrage [Désactivé]
Rapport POST [5 sec]
État du verrou numérique [Activé]
Attendre la pression de F1 en cas d'erreur [Activé]
Messages Option ROM [Forcer le mode BIOS]
Capture d'interruption 19 [Désactivé]
Prise en charge du pilote NVMe natif AMI [Activé]
Mode de configuration [Mode avancé]
Downgrade du BIOS [Désactivé]
Publier les ressources HII [Désactivé]
Flexkey [DirectKey]
Restaurer à partir du Profil [1]
Nom du profil : []
Enregistrer sur un Profil [1]
Slot DIMM # [Slot A2]
Télécharger et installer l'application ARMOURY CRATE [Désactivé]
Télécharger et installer le service et l'application MyASUS [Désactivé]
Special Display Features [Disabled]
D3Cold Support [Disabled]
Discrete GPU _DSM Function A [Disabled]
Discrete GPU _DSM Function B [Disabled]
NVIDIA DGPU Power Enable [Disabled]
Non-Eval Discrete GPU Support [Enabled]
Discrete GPU HPD Circuitry [OR Circuitry]
Discrete GPU's USB Port [Disabled]
Discrete GPU's SSID/SVID [Keep Default Setting]
Discrete GPU BOMACO Support [Disabled]
Thunderbolt / USB4 Support [Disabled]
Processor Aggregator Device [Enabled]
Core Count Control [Enabled]
SMT Control [Auto]
Active Memory Timing Settings [Auto]
Processor CA drive strengths [Auto]
Processor DQ drive strengths [Auto]
Processor ODT impedance [Auto]
Dram DQ drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Power Down Enable [Auto]
Infinity Fabric Frequency and Dividers [Auto]
UCLK DIV1 MODE [Auto]
Precision Boost Overdrive [Auto]
VDDG Voltage Control [Auto]
VDDP Voltage Control [Auto]
SoC/Uncore OC Mode [Auto]
SoC Voltage [0]
VDD Misc Control [Auto]
LCLK Frequency Control [Auto]
VDDIO Ctrl [Auto]
Enable Platform PMIC Control [Auto]
VPP Ctrl [Auto]

OKay, here are the diff, perhaps i shouldn't have disabled some memory security function ?.. afterall !.. i hate all what relates to security !!
View attachment 296801

It's an AMD setting, RAM Power Down in my case breaks all, i set AUTO.

Memory power down mode MUST be on??

Ryzen 9 7950X - B650E Aorus Master - 2 x 16GB Corsair 6200MTs CL36 (CMK32GX5M2B6200C36) Currently running fine at default PBO for CPU, 2167MHz FCLK, 6200MTs for RAM. I've got a weird issue where disabling memory power down leads to my computer eventually going into a 'funk' of crashes/freezes...

www.overclock.net

FYI if memory power down is disabled you WILL get instability unless memory context restore is also disabled. Known AGESA bug.

 

[tabascosauz]

Interesting tidbit from bz about VST test in ycruncher being good for Fabric testing. It's towards the bottom of the list and relatively uncore-heavy, but I didn't notice anything in particular about it. I've not heard of any specifically excellent Fabric testing tools so ycruncher looks to be a good place to start.

Though, that begs the question as to why UMC-heavy RAM testing like TM5 shouldn't at least be *reasonably* good and come close to VST, since properly testing memory (HCI/TM5) on 7950X basically exhausts IFOP's bandwidth capabilities.

In any case, some impressive ECC capabilities on Ryzen's part. Take "stable Fabric speed" claims with a grain of salt, people maybe they changed Bus/Interconnect reporting for Raphael, because anything that unstable would be spitting WHEAs like a machine gun on Vermeer

 

[R-T-B]

Interesting tidbit from bz about VST test in ycruncher being good for Fabric testing. It's towards the bottom of the list and relatively uncore-heavy, but I didn't notice anything in particular about it. I've not heard of any specifically excellent Fabric testing tools so ycruncher looks to be a good place to start.

Though, that begs the question as to why UMC-heavy RAM testing like TM5 shouldn't at least be *reasonably* good and come close to VST, since properly testing memory (HCI/TM5) on 7950X basically exhausts IFOP's bandwidth capabilities.

In any case, some impressive ECC capabilities on Ryzen's part. Take "stable Fabric speed" claims with a grain of salt, people maybe they changed Bus/Interconnect reporting for Raphael, because anything that unstable would be spitting WHEAs like a machine gun on Vermeer

View attachment 296893

tbf I don't think many 7xxx users are OCing infinity fabric, most are just sticking with the stock 2000 setting, but yeah, that is certainly a behavior change.

 

[Mussels]

i use ADK, ISO from MS site, tpm and secure boot are disabled...
... it does something to BIOS when it boots since clearcmos made PC work again !!
//
I can :
1 - save my settings to text
2 - boot win 11, wait BSOD
3 - save settings to text
4 - compare BIOS settings
//
Yes... no setting changed, but no BSOD under Win10 anymore after clearcmos.. and BSOD again since Win11 launched !!
I have Memory Power Down disabled, and High Memory Voltage (aka) too, only settings i touched about RAM... or is it secure boot and tpm thingies that mess the two O/S !?
Since default settings from BIOS Win 11 doesnt' BSOD ...

OKay, here are the diff, perhaps i shouldn't have disabled some memory security function ?.. afterall !.. i hate all what relates to security !!
View attachment 296801

It's an AMD setting, RAM Power Down in my case breaks all, i set AUTO.

Memory power down mode MUST be on??

Ryzen 9 7950X - B650E Aorus Master - 2 x 16GB Corsair 6200MTs CL36 (CMK32GX5M2B6200C36) Currently running fine at default PBO for CPU, 2167MHz FCLK, 6200MTs for RAM. I've got a weird issue where disabling memory power down leads to my computer eventually going into a 'funk' of crashes/freezes...

www.overclock.net

If you're booting on the same PC, windows 11 over-writes windows 10 bootloaders and updates them to 11 specific ones

CMOS clear is going to reset your TPM key, enable secureboot, and enable fTPM
Those are changes that absolutely can and will stop an OS working if they're swapped around

 

[Nordic]

I've been using the 5800x3d for a few weeks now with all cores set to -30. It has proven stable in stress testing and daily use. It seems I won the lottery a bit in that regard. Short of BCLK overclocking, I cannot for the life of me get the CPU to run faster than 4450mhz. At least it is a rock solid stable 4450mhz. It boosts to 4450mhz and stays there. Temps don't seem to go higher than 65c on air cooling right now, so maybe I could eek out a little more with a bit better cooling.

 

[tabascosauz]

I've been using the 5800x3d for a few weeks now with all cores set to -30. It has proven stable in stress testing and daily use. It seems I won the lottery a bit in that regard. Short of BCLK overclocking, I cannot for the life of me get the CPU to run faster than 4450mhz. At least it is a rock solid stable 4450mhz. It boosts to 4450mhz and stays there. Temps don't seem to go higher than 65c on air cooling right now, so maybe I could eek out a little more with a bit better cooling.

-30 5800X3Ds are a lot more common than other CPUs. I guess you could look at it both ways, either AMD played it safe Intel-style, or lazy AMD left way too much on the table.

It is literally not possible to push Precision Boost to exceed the 44.5x multiplier in all-core, or anything loading more than about 3 cores. Like I've said a million times, it's not a normal Vermeer CPU.

 

[Klemc]

-30 5800X3Ds are a lot more common than other CPUs. I guess you could look at it both ways, either AMD played it safe Intel-style, or lazy AMD left way too much on the table.

It is literally not possible to push Precision Boost to exceed the 44.5x multiplier in all-core, or anything loading more than about 3 cores. Like I've said a million times, it's not a normal Vermeer CPU.

Elon Musk can do it, if he goes on Uranus

 

[AusWolf]

I've just updated my BIOS from 1.82 beta (which contained the SoC voltage limiter first) to 1.85 beta with AGESA 1.0.0.7a.

I'm happy to report that my idle temps are back to normal. (they were a tad higher than usual with 1.82)

I've also noticed that unlike on Intel, background programs affect your "idle" power consumption a lot! If I close Steam, GOG Galaxy and the Wargaming.net launcher (which eats the most power out of the three), CPU package power goes down from 25 W to 18 W. That's 7 W difference! On an Intel system, this would be about 1-2 W at most. Strange.

 

[Klemc]

7800X3D with CPU Core Boost on Auto (i mean, not set to OFF), played Ys that's a heavy CPU game (last patch was about that).

 

[Veseleil]

Just setting -30 all core PBO, along with 120 PPT, 75 TDC and 110 EDC (all in PBO tuner), got my 5800X3D's temps down by 15°C in CB20. From 80 to 65. I think this is (just) a beginning of a beautiful friendship.

 

[Klemc]

My CPU gets hot in sleep mode, verry because time to start HWinfo (15/20s) i seen 55°c.

7800 X3D B650E-E

 

[trparky]

My CPU gets hot in sleep mode, verry because time to start HWinfo (15/20s) i seen 55°c.

7800 X3D B650E-E

That is weird. Sleep mode should be where the CPU is... asleep.

 

[AusWolf]

Today, my computer got stuck before POST with the CPU and RAM debug LEDs on, kind of the same way it did with the factory BIOS... except that it took me about 5 attempts to make it boot at all.

I've disabled Memory Context Restore for now, we'll see if it helps. Or maybe 1.2 VSOC with 6000 MHz RAM is a little bit low after all? I didn't have this problem on the last BIOS, so I don't know.

Why does MSi fix one problem in one BIOS version, but then introduce another problem just to be fixed later? It's getting annoying.

 

[Veseleil]

Today, my computer got stuck before POST with the CPU and RAM debug LEDs on, kind of the same way it did with the factory BIOS... except that it took me about 5 attempts to make it boot at all.

I've disabled Memory Context Restore for now, we'll see if it helps. Or maybe 1.2 VSOC with 6000 MHz RAM is a little bit low after all? I didn't have this problem on the last BIOS, so I don't know.

Why does MSi fix one problem in one BIOS version, but then introduce another problem just to be fixed later? It's getting annoying.

The clear CMOS switch is a life saver. - The MSI customer.

 

[Chomiq]

My CPU gets hot in sleep mode, verry because time to start HWinfo (15/20s) i seen 55°c.

7800 X3D B650E-E

Nonsense.

 

[AusWolf]

The clear CMOS switch is a life saver. - The MSI customer.

True. Still better than blowing up my CPU in an Asus board, I guess.

 

[Veseleil]

True. Still better than blowing up my CPU in an Asus board, I guess.

Nice world we live in.

 

[AusWolf]

Another hangup during cold boot this morning. Luckily, I was able to start the PC after one restart this time. It looks like MCR wasn't the culprit, although oddly enough, the PC boots just as quickly with MCR disabled as when it is enabled.

The things I'm thinking about doing next:

• Raise SoC voltage slightly, in case 1.2 V is too low with 6000 MHz RAM. Although, my CPU already runs at 92 °C in Cinebench, and with increased VSOC, it would definitely reach 95 and dial back on its turbo, which I'm not very happy to do on a 280 mm AIO.
• The other option is disabling EXPO, which also isn't ideal for obvious reasons.

I'm also thinking about going full retard mode, and buying a 7800X3D in hopes of better thermals coupled with the phenomenal gaming performance. It's only that I'm a bit reluctant to spend all that money right before vacation time.

 

[Athlonite]

It's fine if you don't mind booting from a FAT16/32 partition, since that is all UEFI can understand in boot terms.

This is the reason I never IF I can help it use bios flashback as a rule specially with Asus mobo's as it's a crapshoot as to whether it'll work or not

 

[AusWolf]

Another hangup during cold boot this morning. Luckily, I was able to start the PC after one restart this time. It looks like MCR wasn't the culprit, although oddly enough, the PC boots just as quickly with MCR disabled as when it is enabled.

The things I'm thinking about doing next:

• Raise SoC voltage slightly, in case 1.2 V is too low with 6000 MHz RAM. Although, my CPU already runs at 92 °C in Cinebench, and with increased VSOC, it would definitely reach 95 and dial back on its turbo, which I'm not very happy to do on a 280 mm AIO.
• The other option is disabling EXPO, which also isn't ideal for obvious reasons.

I'm also thinking about going full retard mode, and buying a 7800X3D in hopes of better thermals coupled with the phenomenal gaming performance. It's only that I'm a bit reluctant to spend all that money right before vacation time.

And... another hangup during boot. This is it! I'm pulling the plug on EXPO for now. I'll do some testing, see how it works (I'm mostly interested in temperatures and stability), and report back. I'm pretty sure I won't notice much difference in performance with my 1080p60 requirements, but it's quite disappointing still.

 

[AusWolf]

Summer has come to rainy England, so my 7700X reaches its max 95 °C even with my AIO. What time is better than this to test what happens when I disable turbo?

Here's the result:

• 2,000 points lost in Cinebench, which is not even 10%.
• Power consumption essentially halved, maxing out at 70 W instead of reaching PPT at 142 W.
• CPU core temperature stops rising before it reaches 60 °C.
• Bonus point: I also don't feel any negative effects of turning off EXPO and running my RAM at 4800 MHz, but the boot hangup is gone.

Why have I not done all of these before? Why doesn't everybody do this? Honestly, I'm just starting to realize how amazing Zen 4 is!

 

[trparky]

Summer has come to rainy England, so my 7700X reaches its max 95 °C even with my AIO. What time is better than this to test what happens when I disable turbo?

Here's the result:
View attachment 300518

• 2,000 points lost in Cinebench, which is not even 10%.
• Power consumption essentially halved, maxing out at 70 W instead of reaching PPT at 142 W.
• CPU core temperature stops rising before it reaches 60 °C.
• Bonus point: I also don't feel any negative effects of turning off EXPO and running my RAM at 4800 MHz, but the boot hangup is gone.

Why have I not done all of these before? Why doesn't everybody do this? Honestly, I'm just starting to realize how amazing Zen 4 is!

Disable turbo?

 

[tabascosauz]

Summer has come to rainy England, so my 7700X reaches its max 95 °C even with my AIO. What time is better than this to test what happens when I disable turbo?

Here's the result:
View attachment 300518

• 2,000 points lost in Cinebench, which is not even 10%.
• Power consumption essentially halved, maxing out at 70 W instead of reaching PPT at 142 W.
• CPU core temperature stops rising before it reaches 60 °C.
• Bonus point: I also don't feel any negative effects of turning off EXPO and running my RAM at 4800 MHz, but the boot hangup is gone.

Why have I not done all of these before? Why doesn't everybody do this? Honestly, I'm just starting to realize how amazing Zen 4 is!

It just is the case that the V-F characteristics of the process they choose is always lagging behind the stats that AMD marketing wants, so Fmax is always set way beyond the efficiency sweet spot. Every generation is amazing when you run it at the last gen's spec. Ever since they moved to chiplets Ryzen clockspeed makes minimal difference to gaming performance.

High TDP Zen 4 has really high base clock at 4.5GHz+, a great demonstration of N5 in its efficiency band. Though honestly, if you are limited to 60Hz, you'd have to do way more before you start feeling any real difference.

 

[AusWolf]

Disable turbo?

Yep. Fixed 4.5 GHz base clock with no boost.

 

[Klemc]

Yep. Fixed 4.5 GHz base clock with no boost.

Good idea, and it's kept cold too.