• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Sapphire HD 5870 Vapor-X Detailed Further

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,863 (7.38/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
First spotted soon after AMD's release of its flagship ATI Radeon HD 5870 accelerator, Sapphire's HD 5870 Vapor-X has finally taken shape. From the looks of it, the final iteration seems to be slightly different from the CGI drawing that made for the older report. Sapphire's design methodology seems to be revolving around giving AMD's reference PCB better cooling than AMD's own cooler. Perhaps owing to lavish use of high-grade digital-PWM circuitry, there is very little room for improvement, leaving room only for cost-cutting, which surprisingly, doesn't form part of Sapphire's new card.

Unlike an older prototype in which the cooler shroud doesn't seem to be fully covering the PCB, the redesigned shroud fits the PCB like a glove, enhancing its aesthetics. The Vapor-X cooler uses a vapor-chamber design, that accumulates and distributes heat to the cooler better. Aluminum fin blocks on either sides of the GPU block disperse heat under the fan's air-flow. The AMD Cypress GPU that powers it is DirectX 11 compliant, which features 1600 stream processors, and a 256-bit wide GDDR5 memory interface to connect to the 1 GB of memory onboard. Sapphire uses overclocked parameters, 870 MHz core (vs. 850 MHz reference), and 1250 MHz / effective 5.00 GHz memory (vs. 1200 MHz / 4.8 GHz reference). Sapphire's HD 5870 Vapor-X should be out in time for X-Mas.



View at TechPowerUp Main Site
 
Certainly looks a lot better than the reference boards. I wonder when we'll be able to get our hands on these? Anybody know/guess?
 
this is HOT i want this only in the 2x X2 flavor.
 
n1ce video card :))))
 
I so want this. Maybe after the first of the year when prices come down.
 
  • Like
Reactions: Kei
Even reference looks kewl, but this just plain rocks!
 
Nice!

Like that the back end is open as well, it means front intake fans can help force air out the vent!
 
I hear Jim Carrey in my head saying "liiiiiiiike a glooove!!"
 
these looks like the silly toxic coolers with Vapor X written on them.

The 4870s Vapor X coolers were MUCH better than the toxic ones, its gonna be interesting to see if they improved these coolers or if they use the same smashed closed heatpipes as the earlier ones.

If anyone finds a pict of the insides it would be really nice to see.
 
now we talk better cooler
 
me wants that and a psu to handle it
 
these looks like the silly toxic coolers with Vapor X written on them.

The 4870s Vapor X coolers were MUCH better than the toxic ones, its gonna be interesting to see if they improved these coolers or if they use the same smashed closed heatpipes as the earlier ones.

If anyone finds a pict of the insides it would be really nice to see.

I quite like the toxic cooler, it has to be the best GPU cooler I've used!

Looking closer at the 1st picture I do see heatpipes running off the center.
 
I quite like the toxic cooler, it has to be the best GPU cooler I've used!

Looking closer at the 1st picture I do see heatpipes running off the center.

I compared both the Toxic and Vapor X coolers on the same cards and the Vapor
X was at least 5C cooler each time.
I had 2 of each to play with (thanks to Tzi) Here is a shot of the toxic tubes smashed closed
Picture005-3.jpg


Here is a back side shot of the 2 dif coolers
Picture002-9.jpg


Here is the dif in fans
Picture003-8.jpg

The smaller fan on the Vapor X (with more blades) was much quieter as well

I would really like to see the insides of the new cooler and see if they changed anything
 
woah... now THAT is a smexy card - much better than stock lol.
 
I thought that the Vapor-X cards were really problematic...
 
How so? What problems are happening?


I heard they were iffy too, was when I first joint up, a lot of people telling people not to buy them etc, never saw any sources though :laugh:
 
Very bad ass looking card.
 
Very nice

97b.jpg


It looks like you could swap out that 92mm fan there & replace it with one of your own.

Ive still got an old 92mm LED fan that i took off a old Zalman flower cooler a while back. that would look totally bling with that on.

Im not an overall huge fan of vapour X coolers myself - or at least not the toxic ones anyway my 4870 toxic use to idle around 60-65'c untill I put some MX-2 on it & tweaked the fan profiles in the bios. now its more like 50-55'c idle.

I still keep the temps from hitting 70'c if i can.
 
I thought that the Vapor-X cards were really problematic...
I've been using my HD 4870 Vapor-X 24x7 for months crunching distributed computing applications when I'm not gaming. I haven't had a single problem so far and am still going strong.

I'd almost like it to start acting up. It would give me an excuse to upgrade to this sweet piece of silicon.
 
I'm interested to see what other manufacturers have to offer, ASUS will be releasing their non-reference (cooled) 5870 soon or so I've heard. I'm a bit gutted Gainward aren't doing any more ATi cards as well.

:(
 
How so? What problems are happening?

Many of the 1 egg reviews are describing a boot problem. But I know, that's just a single card and any model of video card will have some lemons. Also, knowing that there is an active water cycle going on within the cooler would make me kind of hesitant about it's reliability, that is, there is a water cycle (evaporation, condensation, precipitation) going on. I'm not completely sure as to how the coolers work.
 
The reason why there are people that don't like the Vapor-X versions of the HD 4870 and HD 4890 is because their PCB design lacks the Volterra voltage control chip. :P For overclockers, that's a kick in the balls. One of Sapphire's dumbest mistakes.

EDIT: I double-checked the review of the HD 4890 that W1zzard did, but his had a reference PCB. Weird.
 
Last edited:
If I cant get a x2 then this is what Im getting... F***ing awesome card...
 
One of the nicest cards I have seen, I think I will get this instead of the XFX now.
 
Back
Top