Your PC ATM

[freeagent]

Don't zap a chip by mistake watch out for static build up!

They love it man! I used to build on carpet lol.. but I know to discharge myself electrically.. sometimes.

I shouldn't joke about that.. shhh..

 

[masterdeejay]

Sleeper in an old Chieftec case.

 

[[crs]]

 

[Noci]

@cRs , do you actually have a flow through the GPU waterblock?
2200 l/h seems ridiculously high for a D5 with a 360 rad, CPU-block and GPU-block (even with the Queen watching ).

 

[[crs]]

@cRs , do you actually have a flow through the GPU waterblock?
2200 l/h seems ridiculously high for a D5 with a 360 rad, CPU-block and GPU-block (even with the Queen watching ).

Yea it's flows through the GPU to the CPU then back to a 480mm rad then into the res, at 100% power it claims 220l/r and at 50% power 166 l/r apparently.

 

[Noci]

at 100% power it claims 220l/r and at 50% power 166 l/r apparently.

My bad, I didn't see the . in the 220.0 l/h on the picture. But that is still an impressive flow for only one D5 .

 

[SimpleTECH]

Got a new case for another build of mine. I really suck at cable management.

Not bad for a $50 case though.

 

[nomdeplume]

Got a new case for another build of mine. I really suck at cable management.

For extra points you could route the fan cable through those fanblades as well.

---

Directly after posting tongue in cheek comment above. More time than desired was spent re-managing every cable in my case. To avoid moving a HDD up one bay.

 

[malons]

New AMD Radeon RX 7900 XTX with Alphacool Core WB

 

[Ruru]

Hello there, I'm finally closing to close the case which was open for over a year.
View attachment 391675
I'm using old xps 630i case in which I've got so much pcb that I don't know even if i will use it (2 pcb with fans header and other stuff, I don't even know what for is pin header for SLAB debug hdr). View attachment 391673
I've ordered cheap chinese mesh for pci slots and cheap white plastic filter, which i need to cut to specific places.
View attachment 391672
View attachment 391671
View attachment 391670
Unfortunatelly in this build Noctua 14 undustrial has no place. (that one in first photo.)
ps I lost brackets for cpu cooling to set it parallel to exhaust.
Edit. It's first time I guess in two years that back io shroud is finally in placy . end edit.
Edit 2. I love this case which has inverted mobo . end edit 2.

Inverted ATX is always dope. I had one case (Bitfenix Outlaw) which had that layout and I liked it a lot.

 

[malons]

Sleeper in an old Chieftec case.

View attachment 392447View attachment 392448View attachment 392449

That Panasonic CF-52

 

[l1CappYl1]

View attachment 392462

Looks like deja vu. I've got the same case and fans.

 

[Yraggul666]

My PC isnt mine anymore lol

View attachment 392293

I'm quoting HIS/HER Majesty: "I [insert gorgeous cat name here] MUST inform the clumsy hunter hooman known as das.de.dude that the PC was NEVER his to begin with. This Planet and everything on it belong to MEOWZ. MEOWZ RULL!
We MEOWS allow hooman to feed, pet, love, scratch and live on this MEOWZ controlled Planet etc and we love hooman back but don't let that go to your head, hooman, all Planet BELONG TO MEOWZ!"

 

[Count von Schwalbe]

Planet BELONG TO MEOWZ

All your base are belong to us.

 

[freeagent]

Moar ram and a different cooler

Doesn’t look as nice but it works well..

 

[Veseleil]

Sleeper in an old Chieftec case.

View attachment 392447View attachment 392448View attachment 392449

That Panasonic CF-52

That hunting rifle though.

 

[masterdeejay]

That hunting rifle though.

It is a customized air rifle for my children. Haenel 310 bolt action in a swedish mauser M38 stock (little damaged). I have a vomz (or komz?) SVT-40 scope 1943...custom mounting. It is from my grandpa. 5x 12 shot clip 4.4mm lead ball. It is a modernised version of the hitlerjugend training rifle. But the scope is no use because it is an unrifled 10m shooting training version and it is mounted very high.
I sold my Toz-8 that's where the scope was originally fitted. A also have a very log ww1 manlicher bayonet but I couldn't find a solution to install it. My great-grandfather was in the first and second ww so i have a few relics. (medallions, iron crosses, rare books...)
The gun laws here are very strict, I only can shoot serious guns at the shooting range. At home i only can use air rifles (under 7.5J) and ruber ball shotting revolvers.

That Panasonic CF-52

That is an unkillable working machine. (i have the mk3 i think) i5 520m, 4GB ram, 120GB SSD. Still over 1 hour battery time with the 10y+ old battery. I installed the win11 core edition (just ~1GB ram usage) and my tools, it is fast. Its missing some port covering. Very high brightness screen with some blue anti reflecive coating. Mil. spec....


I'd rather use old, unkillable hardware that's a little weathered than shiny new hardware that's easily broken.

 

[Kwadratowicz]

With that picture I'm not scared of buying super flower psu

Ps behold ancient rbww, and w


And that's why I need molex cable for new psu, cause pcb that is lighting this panels has only molex connector.

 

[masterdeejay]

With that picture I'm not scared of buying super flower psu

Ps behold ancient rbww, and w


And that's why I need molex cable for new psu, cause pcb that is lighting this panels has only molex connector.

Super flower make high quality psu-s. I have the leadex platinum 750w.

https://cultists.network/140/psu-tier-list/

 

[Veseleil]

With that picture I'm not scared of buying super flower psu

It's one of the best PSU OEMs in existence. Maybe we didn't get a joke or something.
My SF golden green (quite an old platform, in my case branded as Rosewill capstone 1000M) doesn't show signs of age, and I've got it used and abused from a cryptominer, 7 years ago.

 

[Kwadratowicz]

It's not a joke, I've just purchased Super Flower Leadex VII XG 1000W Gold, and yesterday I did not even knew that they existed . I'm changing graphics card, but with my 550w psu I think it might be to little for rx 9070 xt . (It's not that I've lost somewhere in my trash/treasure pile second 6+2 pin connector for gpu).

 

[Ruru]

My older "the perfect early 2000s FPS" gaming PC, told about this to @lexluthermiester

When you have a GTX 660 3GB GK104 and GTX 660 2GB GK106, the slower is a dedicated PhysX card.

"Ruru, wait, is that a Zalman cooler?" Yeah, it is, actually the better 660's cooler is from the slower one, and I had to put something on the slower. Got that Zalman VF700Cu with a 6600 GT AGP.

 

[lexluthermiester]

My older "the perfect early 2000s FPS" gaming PC, told about this to @lexluthermiester

When you have a GTX 660 3GB GK104 and GTX 660 2GB GK106, the slower is a dedicated PhysX card.

"Ruru, wait, is that a Zalman cooler?" Yeah, it is, actually the better 660's cooler is from the slower one, and I had to put something on the slower. Got that Zalman VF700Cu with a 6600 GT AGP.

Nice looking build. That drooping GTX660 is the only issue I can see.

 

[nomdeplume]

My older "the perfect early 2000s FPS" gaming PC

What do you have in the front bays? Most of them don't appear to be hooked up.

 

[Ruru]

Nice looking build. That drooping GTX660 is the only issue I can see.

Yeah, it sags... I'll figure something out

What do you have in the front bays? Most of them don't appear to be hooked up.

Just useless IDE DVD drives to fill them empty bays. The blanks are... "somewhere"