Alcpone's Official 3DMark '06 Compilation

[DaMulta]

I noticed that it changes the clock request in CCC.

Are you using the 2/d clock settings or just the 3d ones?

 

[trt740]

3d but it make zero difference

 

[yogurt_21]

I can run 3.4 in windows for about 20 secs before lock LOL

The mem can be turned down to 3-3-3-10, but I have it at 4-4-4-14 at the moment.

TRT do u use the AMD Clock tool? If so what ver?

lol I can boot at 3.7GHZ at a 266fsb (stock 14x mult) with mem at 1066 it wont lock in 2d, but when starting a bench, my vapochills temp monitor goes from -2C to 0 to 2 to 6 to ... all in a matter of seconds, fast fingers always a must with phase lol. if only I had the discipline to switch this over to r404a or the money for a vapochil LS.

 

[trt740]

lol I can boot at 3.7GHZ at a 266fsb (stock 14x mult) with mem at 1066 it wont lock in 2d, but when starting a bench, my vapochills temp monitor goes from -2C to 0 to 2 to 6 to ... all in a matter of seconds, fast fingers always a must with phase lol. if only I had the discipline to switch this over to r404a or the money for a vapochil LS.

or just buy a 6400+ black and hit 3.6 with what ya got

 

[DaMulta]

950MHz Core, 980MHz Memory, 1.35v 3D Voltage
1050MHz Core, 960MHz Memory, 1.35v 3D Voltage
1100MHz Core, 980MHz Memory, 1.35v 3D Voltage
1150MHz Core, 950MHz Memory, 1.2v 3D Voltage
1180MHz Core, 950MHz Memory, 1.2v 3D Voltage

 

[Mediocre]

^^ Whats all this now??

What kind of files are those???

Anything I can use to up my GPU Vcore???

 

[DaMulta]

Nope because you have a GDDR4 card like me

I don't know how to edit the GDDR4 into the bios file......

 

[Mediocre]

AWWWW WTF...seriously?? So those .sb files are like what? BIOSes? Or part of that software adjustable voltage for R600??

I could care less about the memory or memory voltage, I just want more than 800mhz outta my core...Would make the aftermarket cooler all that more 'worth it'

 

[DaMulta]

BIOSes

 

[Mediocre]

DAMN those lucky (read:cheap) bastards with 512mb cards

Well, you've given me something to do....find a modded BIOS for our cards...

What do you recon is a good VGPU with that HR-03? I load up to about 70C now...I bet I could pull another 100mhz outta it and stay under 90C

 

[yogurt_21]

950MHz Core, 980MHz Memory, 1.35v 3D Voltage
1050MHz Core, 960MHz Memory, 1.35v 3D Voltage
1100MHz Core, 980MHz Memory, 1.35v 3D Voltage
1150MHz Core, 950MHz Memory, 1.2v 3D Voltage
1180MHz Core, 950MHz Memory, 1.2v 3D Voltage

lol those volts wont get me to those clocks, not unless I put the water back on my cpu and the phase on my gpu.

 

[Ketxxx]

Still top 1950Pro place? Now now, my score wasnt that high.

 

[DaMulta]

lol those volts wont get me to those clocks, not unless I put the water back on my cpu and the phase on my gpu.

Your 2/d clocks should stay the same in dos and in windows.....You could always try the 950Mhz

Make the come back in scores for us AMD guys!!!!!Just OC the hell out of ur GPU!!!!

 

[Lero]

Thats my score of 13802. Probably i could push it bit over 14k, altho i dont want to stress it too much.
Intel core 2 Quad Q6600 @ 3,6GHz and 1.392v
Sapphire Radeon HD2900 Pro 1GB (its flashed to XT so thats why 3dmark shows as that one) @ 857MHz core and 1250 MHz memory.
I think its pretty nice achivement as im doing all that on STOCK cooling.
I'll push it futher as soon as i get some cooling (probably air). I'm still working on whats 24/7 for this setup atm. CPU ran with prime95 for 2 hours @ 3.4GHz showed no errors (i didnt have time to let it run for more). Bigger issue there is for GPU, what tool should i use to check for artifacts ? ATT aint working for me at all. Playing @ 800 core 1150 memory for some time shows no artifacts but thats not proper way to test it.

 

[Dr. Spankenstein]

Make the come back in scores for us AMD guys!!!!!Just OC the hell out of ur GPU!!!!

Well, considering that the ATI scores only have 15 2900 series cards vs 43 8800 series, I'd say we're doing quite well! Less than 220 points separate the average scores in favor of the Nvidia side. With a few more 2900 (and soon 3800) owners and we'll be sittin' pretty!

 

[Tatty_Two]

Well, considering that the ATI scores only have 15 2900 series cards vs 43 8800 series, I'd say we're doing quite well! Less than 220 points separate the average scores in favor of the Nvidia side. With a few more 2900 (and soon 3800) owners and we'll be sittin' pretty!

In most of those results irrespective of the card, it's as much about the CPU behind it, life's just getting so complicated these days, I hope 3D Mark 2007 goes back to 2003 days where the card was the overiding factor, the CPU only played about 25% of the deal, in 2005 it was about 35% and in 2006 50%.

My 8800GTS beats quite a few 2900XT's (12,305) although I know overclocked in benches the XT is the faster card, my CPU gives me the push up to beat them, Quads even more so, it's just more of a system test now, cant really call it a Gfx card test anymore

 

[Dr. Spankenstein]

I hope 3D Mark 2007 goes back to 2003 days where the card was the overiding factor, the CPU only played about 25% of the deal, in 2005 it was about 35% and in 2006 50%.

....it's just more of a system test now, cant really call it a Gfx card test anymore

I couldn't agree more, on both points. Very sad...

 

[yogurt_21]

Your 2/d clocks should stay the same in dos and in windows.....You could always try the 950Mhz

Make the come back in scores for us AMD guys!!!!!Just OC the hell out of ur GPU!!!!

I'll try it after I get a 6400 black edition, gonna sell my fx for it. if it ocs like my fx, I'll hit 3.8 on my cooling, if it oc's better than my fx, 4GHZ is possible. (granted I'll prolly be at 3100 pts in the cpu test in 06 at 4GHZ just about what the intel guys get at 3.2 lol) but it'll help see how close I can get to 12k on my current clocks. goal is 12500, on the 790 board with the black edition. I'll save up for the 3GHZ phenom when that launches.

 

[yogurt_21]

Still top 1950Pro place? Now now, my score wasnt that high.

no but most x1950pro users have swapped for something better already. lol

 

[cshacks]

8800GT Benchmark

Well here my 8800GT benchmark, pretty good I think for a mid range graphics card.

8800GT is overclocked a bit to the following settings

Core 700Mhz - Memory 1000Mhz - Shader 1600Mhz

Hope this gets me on the score board.

Futuremark Compare link - http://service.futuremark.com/compare?3dm06=3641579

Cheers
Chris

 

[Tatty_Two]

Well here my 8800GT benchmark, pretty good I think for a mid range graphics card.

8800GT is overclocked a bit to the following settings

Core 700Mhz - Memory 1000Mhz - Shader 1600Mhz

Hope this gets me on the score board.

Futuremark Compare link - http://service.futuremark.com/compare?3dm06=3641579

Cheers
Chris

I think that gives you top spot!!! Well done.....so nice to see an NVidia back on top (that was a long 2 weeks ) Even if it is JUST a mid ranged card, and all on a Q6600 at just 3.6Gig.......I think thats sums up the potential and what the competition has to match. Will the card go any higher? A friend got his on Wednesday and his is running at 725 core and 1075 memory, he has a Q6600 running at 3.85Gig and broke 15,200!!

 

[erocker]

Well here my 8800GT benchmark, pretty good I think for a mid range graphics card.

8800GT is overclocked a bit to the following settings

Core 700Mhz - Memory 1000Mhz - Shader 1600Mhz

Hope this gets me on the score board.

Futuremark Compare link - http://service.futuremark.com/compare?3dm06=3641579

Cheers
Chris

And without the CPU being OC'd?!?! This is crazy! [FS 8800GTS 640mb]

 

[Tatty_Two]

And without the CPU being OC'd?!?! This is crazy! [FS 8800GTS 640mb]

No, C1e is enabled so on low power (check multi), I think he is at 3.6Gig if you look at the futuremark link.

 

[cshacks]

Hi, your quite right Tatty_One I had C1E enabled, I've been playing with overclocking it some more and had to clear CMOS and forgot to disable it. Also I had the card at lower clock speed, I've re done the benchmark, no matter what I do I cant seem to get over 15k
)O: Core is definately @ 700Mhz mem, 1000Mhz, Shader 1600Mhz, and I've squeezed some more out of the CPU.

I'll have to try the card clocks seperately and see whats maxing out, so far it freezes if I go over 700 Core.

new Orb link - http://service.futuremark.com/compare?3dm06=3643544

Cheers

Chris

 

[Tatty_Two]

Hi, your quite right Tatty_One I had C1E enabled, I've been playing with overclocking it some more and had to clear CMOS and forgot to disable it. Also I had the card at lower clock speed, I've re done the benchmark, no matter what I do I cant seem to get over 15k
)O: Core is definately @ 700Mhz mem, 1000Mhz, Shader 1600Mhz, and I've squeezed some more out of the CPU.

I'll have to try the card clocks seperately and see whats maxing out, so far it freezes if I go over 700 Core.

new Orb link - http://service.futuremark.com/compare?3dm06=3643544

Cheers

Chris

What GPU temps you hitting on the card at 700Mhz?