Well everyone i got good news about the freezing on my asus p5q premium with the gpu in x16 2.0 lane turned out the second sub timing was causing the freezing with higher transfer speed so i loosong them all up to 9-9-9-9-9-8-9 seem to help alot as i lose the higher transfer speed as it either the northbridge or ram cant handle more than 7500mb on read and copy as well the latency is 70.0ns aida64. With the current overclock e5450 4 1ghz @ 1.264v, fsb 456, ram 1143mhz @ 2.16v, northbridge @ 1.42v.
I throw up a few pictures tonight
Asus p5q premium bios settings
E5450 @ 4.12ghz gskill f2.8500cl5-2gbpk x4 @ 1143mhz
JumperFree Configuration Settings
AI Overclock tuner: manual
CPU Ratio Setting: 09.0
FSB Strap to North Bridge: auto
FSB Frequency: 456
PCI-E Frequency: 101
DRAM Frequency: 1143
DRAM CLK Skew on Channel A1: auto
DRAM CLK Skew on Channel A2: auto
DRAM CLK Skew on Channel B1: auto
DRAM CLK Skew on Channel B2: auto
DRAM Timing Control:
1st Information :
CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 15
RAS# to RAS# Delay : 6
Row Refresh Cycle Time: 80
Write Recovery Time: 13
Read to Precharge Time: 5
2nd Information :
READ to WRITE Delay (S/D): 9
Write to Read Delay (S): 9
WRITE to READ Delay (D): 9
READ to READ Delay (S): 9
READ to READ Delay (D): 9
WRITE to WRITE Delay (S): 9
WRITE to WRITE Delay (D): 8
3rd Information :
WRITE to PRE Delay: 21
READ to PRE Delay: 7
PRE to PRE Delay: 2
ALL PRE to ACT Delay: 7
ALL PRE to REF Delay: 7
DRAM Static Read Control: disabled
DRAM Read Training: disabled
MEM. OC Charger: enabled
AI Clock Twister: enabled
AI Transaction Booster: manual
Common Performance Level: 8
Pull-In of CHA PH1: disabled
Pull-In of CHA PH2: disabled
Pull-In of CHA PH3: disabled
Pull-In of CHA PH4: disabled
Pull-In of CHB PH1: disabled
Pull-In of CHB PH2: disabled
Pull-In of CHB PH3: disabled
Pull-In of CHB PH4: disabled
CPU Voltage: 1.27500 (idle 1.256v load 1.264v
CPU GTL Voltage Reference (0/2): 0.645
CPU GTL Voltage Reference (1/3): 0.665
CPU PLL Voltage: 1.52
FSB Termination Voltage: 1.28
DRAM Voltage: 2.16
NB Voltage: 1.42
NB GTL Reference: 0.610
SBridge Voltage: 1.20
PCIE SATA Voltage: 1.50
Load Line Calibration: enabled
CPU Spread Spectrum: disabled
PCIE Spread Spectrum: disabled
CPU Clock Skew : auto
NB Clock Skew : auto
CPU Margin Enhancement : optimized
Advance CPU Settings
CPU Ratio Setting: 09.0
CPU VID: 1.113v
C1E Suppport: disabled
Max CPUID Value Limit: disabled
Intel® Virtualization Tech: disabled
CPU TM Function: disabled
Execute Disable Bit: disabled
If anyone want to try this settings let me know or if you have any question i be more than happy to help
I will try to push for more overclock sometime tonight to see where it hit the wall as i havent hit any wall yet